Posts by Dirtsquirrel

The G2 thru to G15 irons are remarkably similar in how they play. More differences in the shafts offered. I too would also look at the I3 irons especially the I3 oversize which are stupid easy to hit long and straight and very...

Looks like a pretty good deal. Even better since it sounds like he is open to a lower offer. One of my buddies is bagging the 580 xd driver and still outdrives most guys using newer equipment. Pretty sure that is a stiff shaft in the...

I20 sets are starting to turn up more frequently at 2nd Swing and Three Balls but you could be waiting a long time to find a green dot set with a shorter length shaft since the it is more common for the upright lie angles to be...

You will be charged for shipping, new grips, cutting shafts, and lie adjustment. Seems to me this will add up to close to the $200 you would be saving over new. Custom fitting and length should be free if you buy brand new Pings. I...

Whether to get blades has been knocked about for as long as cavity backs have been available as an alternative. I am a mid-handicap and do not see a huge difference in scoring switching back and forth between SGI irons and full on forged...

350 or lower looks reasonable if he will let you try them for at least 18 holes to see if they are really a good fit for your game. Not really a problem to find a great set of irons at that price so you can afford to be selective.

I agree with any of the Karsten series as fair value for 40.00 and would probably consider them myself if red or black dot. Keep in mind that an older set like this will usually require new grips and may not be the best lie angle or...

I need to ask Lblack14 - what iron is that? Gets my vote for sure!

If you are right handed try closing your stance a bit by either moving your left foot forward about 2 inches perpendicular to the target line or by moving your right foot back a similar amount. It seems too easy but when I do this it...

I just did a search on eBay of the iron sets listed using "inch" in the search line and came up with a set of Taylor Made Burner Plus that are 1 inch short of standard. This might not be a bad place to start if you stick to the Top...