Jump to content
IGNORED

What to do with my Scotty?


Note: This thread is 5652 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Quick question for everyone, I have an old Scotty Cameron that has seen it's day. It's an old TeI3 and I really like the putter. I want to get it refinished but not sure to jazz it up a bit or just get it back to new with the same look? Thoughts?

In my bag:
MP 57's 4-PW KBS Stiff
Ping G 20 10.5* Stiff
Taylormade V Steel 3 and 5 wood

Bridgestone J33 R Hybrid 21* NV Shaft
Mizuno MP Quad Cut 52* and 56* Spinner Shafts

Scotty Cameron Newport Two TeI3

Link to comment
Share on other sites


Personally I'd get it refinished to original. When it comes time to sell it a putter in refinished original condition should sell for more than something with YOUR initials or favourite saying and paintfilled in YOUR idea of a stylish Lime Green and Hot Purple if you know what I mean!
Link to comment
Share on other sites


Get it refinished back to OEM with your initials. That's only if you plan on keeping it forever. If not, get it back to stock and sell it.

- Tour Issue Taylormade R7 Superquad TP Matrix Ozik Xcon 5 X-stiff
- Nike Dymo 3 Wood UST Axivcore Stiff
- Nike Dymo 5 Wood UST Axivcore Stiff- Nike Blades 3-PW S300- Nike SV Tour 50* 54* 58* S400- Titleist Scotty Cameron Newport Beach- Nike Tour D

Link to comment
Share on other sites


send it to B.O.S.

They will put whatever finish you want on it, or go to golfwrx, check out lamont if its beat up, he can restore it to newish!

|Callaway FT-9 Tour Neutral 9.5 Diamana BlueBoard| TaylorMade TourLaunch 14.5 Matrix Ozik F7M2 X| Adams Idea Pro 20 Matrix Ozik Altus X| Mizuno MP-32 4-PW TTDG S300|Titleist Vokey 50| Tour Issue Titleist Black Ni Vokey SM 54|Callaway X Forged 62 || Kirk Currie Brazos| Callaway Tour IX/...

Link to comment
Share on other sites


Send it to the Custom Shop, especially if you ever intend to even think about selling it, and personally I'd get it back to original paintfill and finish

in my exterme sport bag :
Driver : SQ 460 9.5* Aldila NV65R
3 Wood: Ignite 15* graphite R shaft
2 Hybrid : 3DX DC 17*
3h-PW: Ignite with uniflex stock shaftWedges: Vokey 256.14 260.08Putters: Studio Style Newport 2 35", Red X-3 35" 350g, Solestamp Newport TeI3Balls: NXT Tour Shoes SP-8

Link to comment
Share on other sites


I would Advise AGAINST the custom shop..i know some guys who have had bad experiences with them. If the insert is in bad shape, by all means use them, but if your just getting paint fill or a new finish or stamping, Use BOS for the finish, and then learn how to do the stamping/paintfill yourself (practice on some old clubs please!!) its very useful/fun to know how to do it yourself.

|Callaway FT-9 Tour Neutral 9.5 Diamana BlueBoard| TaylorMade TourLaunch 14.5 Matrix Ozik F7M2 X| Adams Idea Pro 20 Matrix Ozik Altus X| Mizuno MP-32 4-PW TTDG S300|Titleist Vokey 50| Tour Issue Titleist Black Ni Vokey SM 54|Callaway X Forged 62 || Kirk Currie Brazos| Callaway Tour IX/...

Link to comment
Share on other sites


I think I asked this before but is there a site for BOS???? Are his prices reasonable? I know the Scotty's custom shop is very pricey.

In my bag:
MP 57's 4-PW KBS Stiff
Ping G 20 10.5* Stiff
Taylormade V Steel 3 and 5 wood

Bridgestone J33 R Hybrid 21* NV Shaft
Mizuno MP Quad Cut 52* and 56* Spinner Shafts

Scotty Cameron Newport Two TeI3

Link to comment
Share on other sites


I think I asked this before but is there a site for BOS???? Are his prices reasonable? I know the Scotty's custom shop is very pricey.

I think the Custom Shop is gonna run around $190 for a complete restore of that model.

You have a great wand. If it were mine, I'd go ahead and have my initials or name stamped and get a new headcover at that time, too. I'd also have it adjusted (loft / lie) to suit me. Sweet putter.....post up the pics and story of what you do with it....sure would be neat to watch it develop.
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...
Link to comment
Share on other sites


http://www.blackoxideservice.com/golf.html

Theres an overview, about 50 bucks (maybe more, maybe less) depending on your finish, THis is just a new finish, but if the putter/insert are still in good shape, no need to send it to scotty, im sure someone you know can stamp initials or do paintfill, plus you can always piggyback and order a new HC when some one you know orders from the custom shop.

|Callaway FT-9 Tour Neutral 9.5 Diamana BlueBoard| TaylorMade TourLaunch 14.5 Matrix Ozik F7M2 X| Adams Idea Pro 20 Matrix Ozik Altus X| Mizuno MP-32 4-PW TTDG S300|Titleist Vokey 50| Tour Issue Titleist Black Ni Vokey SM 54|Callaway X Forged 62 || Kirk Currie Brazos| Callaway Tour IX/...

Link to comment
Share on other sites


I would Advise AGAINST the custom shop..i know some guys who have had bad experiences with them. If the insert is in bad shape, by all means use them, but if your just getting paint fill or a new finish or stamping, Use BOS for the finish, and then learn how to do the stamping/paintfill yourself (practice on some old clubs please!!) its very useful/fun to know how to do it yourself.

I agree that if it's only for a paintfill job you should do it yourself, but having an aftermarket finish done on your putter will probably cut at least half of the potential buyers if you ever think about selling it, same thing can be said for the stamping

in my exterme sport bag :
Driver : SQ 460 9.5* Aldila NV65R
3 Wood: Ignite 15* graphite R shaft
2 Hybrid : 3DX DC 17*
3h-PW: Ignite with uniflex stock shaftWedges: Vokey 256.14 260.08Putters: Studio Style Newport 2 35", Red X-3 35" 350g, Solestamp Newport TeI3Balls: NXT Tour Shoes SP-8

Link to comment
Share on other sites


check out www.slightergolf.com

I was up on Seattle and was at his shop on Tuesday. What a great guy and he does all of the work himself. Whatever you want. His putters are all handmades, by him.
The refinishing is fabulous.

In My Bag: This week
Driver: Nike square Sumo 10.5
4-Wood: Nike square Sumo 14.5
7 wood Cleveland launcher,
5 utility 19* clevelandIrons: 4-7 Titleist 690mb 8-pw Mizuno MP 33Wedges: Gauge Design GAS II 52* and 58* Putter: Scotty Cameron TE 10 2.5TP Mills or Cameron's or Bettinardi's. let me...

Link to comment
Share on other sites


check out

What do his putters run $$$?

Danny    In my :ping: Hoofer Tour golf bag on my :clicgear: 8.0 Cart

Driver:   :pxg: 0311 Gen 5  X-Stiff.                        Irons:  :callaway: 4-PW APEX TCB Irons 
3 Wood: :callaway: Mavrik SZ Rogue X-Stiff                            Nippon Pro Modus 130 X-Stiff
3 Hybrid: :callaway: Mavrik Pro KBS Tour Proto X   Wedges: :vokey:  50°, 54°, 60° 
Putter: :odyssey:  2-Ball Ten Arm Lock        Ball: :titleist: ProV 1

 

 

 

 

Link to comment
Share on other sites

Awards, Achievements, and Accolades

I agree that if it's only for a paintfill job you should do it yourself, but having an aftermarket finish done on your putter will probably cut at least half of the potential buyers if you ever think about selling it, same thing can be said for the stamping

I would disagree..an aftermarket finish, (black, copper, anuything) i would say increases the value, stamping, decreases.

|Callaway FT-9 Tour Neutral 9.5 Diamana BlueBoard| TaylorMade TourLaunch 14.5 Matrix Ozik F7M2 X| Adams Idea Pro 20 Matrix Ozik Altus X| Mizuno MP-32 4-PW TTDG S300|Titleist Vokey 50| Tour Issue Titleist Black Ni Vokey SM 54|Callaway X Forged 62 || Kirk Currie Brazos| Callaway Tour IX/...

Link to comment
Share on other sites


Slighters go for $250-$500 depending on what you want. Go to the site and put in a request.

His refinishing is pretty reasonable as well

In My Bag: This week
Driver: Nike square Sumo 10.5
4-Wood: Nike square Sumo 14.5
7 wood Cleveland launcher,
5 utility 19* clevelandIrons: 4-7 Titleist 690mb 8-pw Mizuno MP 33Wedges: Gauge Design GAS II 52* and 58* Putter: Scotty Cameron TE 10 2.5TP Mills or Cameron's or Bettinardi's. let me...

Link to comment
Share on other sites


Thanks for all the input, I just requested a quote from the Black Oxide. I will take before and after pictures to show everyone the work. Thanks

In my bag:
MP 57's 4-PW KBS Stiff
Ping G 20 10.5* Stiff
Taylormade V Steel 3 and 5 wood

Bridgestone J33 R Hybrid 21* NV Shaft
Mizuno MP Quad Cut 52* and 56* Spinner Shafts

Scotty Cameron Newport Two TeI3

Link to comment
Share on other sites


Cool.....good luck. Looking forward to seeing how it develops.
909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...
Link to comment
Share on other sites


I just got a used Tei3 Newport 2 myself recently and I'm going through essentially the same dilemma. The only things I have done up to this point is get a new grip and polish up the club head. I actually really like the original look, partly because I think it's hard to find matching colors to the insert...

Keep me filled in on what you do, I'm definitely an interested party!

Driver:  R11S 10.5°, Fairway Woods:  909 F2 15.5°, Hybrid:  G10 21°

Irons:  Tour Preferred MC 4-P, Wedges:  Vokey SM 52.08, 56.10, 60.04

Putter:  Tei3 Newport II / Circa 62 #3, Ball:  Pro V1X / NXT Tour

Link to comment
Share on other sites


I would disagree..an aftermarket finish, (black, copper, anuything) i would say increases the value, stamping, decreases.

well I guess we'll have to agree to disagree on that as I know for a fact that a whole bunch of people won't touch a scotty with an aftermarket finish with a 10 foot pole...

in my exterme sport bag :
Driver : SQ 460 9.5* Aldila NV65R
3 Wood: Ignite 15* graphite R shaft
2 Hybrid : 3DX DC 17*
3h-PW: Ignite with uniflex stock shaftWedges: Vokey 256.14 260.08Putters: Studio Style Newport 2 35", Red X-3 35" 350g, Solestamp Newport TeI3Balls: NXT Tour Shoes SP-8

Link to comment
Share on other sites


Note: This thread is 5652 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • Day 12: Same as last couple days, but focus was on recentering aspect of flow. When I recenter earlier I make decent contact most swings but if I recenter late or not at all it’s a roll of the dice. 
    • A couple of things.  Some of the clubs in your bag should be dropped immediately.  A 2-iron for example with what obviously seems to be a lower swing speed or possibly not great swing yet is a definite no-no.  To be hitting that 120-140 yards, which I assume includes run, is a sign that you are not getting the ball airborne at the correct angle to maximise distance.  The reason your 3 and 5 hybrid are going the same distance is that your launch angle is better with the 5.  Loft is your friend. Ideally I would suggest going to a golf or sporting store where you can hit golf balls on a simulator without being disturbed to understand your club carry distances and hopefully swing speed.  With that information we can definitely guide you better.
    • Let us be clear, unless you have proof of cheating, you just sound like a case of sour grapes.  In our club we have a guy who won club titles for many years.  Yes, he was a low single digit handicapper, but there have been quite a few others who played at his level.  Yet his mental strength and experience helped him win in many years when he shouldn't have.  Did he sandbag.  DEFINITELY NOT.  Did he just minimize his mistakes and pull out shots as and when needed.  Definitely.
    • Day 111 - Worked on my grip and higher hands in the backswing. Full swings with the PRGR. 
    • First off please forgive me if this is not a proper post or not in the proper location, still learning the ropes around here. Second, it's important that I mention I am very new to the game with only about 10 rounds of golf under my belt, most being 9 holes. Only this year have I started playing 18. That being said, I am hooked, love the game and am very eager to learn and improve. To give you an idea of my skill, the last 2 18 rounds I played were 110 and 105. Not great at all, however I am slowly improving as I learn. Had been having bad slicing issues with the driver and hybrids but after playing some more and hitting the range, I've been able to improve on that quite a bit and have been hitting more straight on average. Irons have always come easier to me as far as hitting straight for some reason. Wedges have needed a lot of improvement, but I practice chipping about 20-30 mins about 3-5 times a week and that's helped a lot. Today I went to the range and started to note down some distance data, mind you I am averaging the distances based off my best guess compared to the distance markers on the range. I do not currently own a range finder or tracker. From reading some similar posts I do understand that filling gaps is ideal, but I am having a some issues figuring out those gaps and understanding which clubs to keep and remove as some gaps are minimal between clubs. Below is an image of the chart I put together showing the clubs and average distances I've been hitting and power applied. For some reason I am hitting my hybrids around the same distances and I am not sure why. Wondering if one of them should be removed. I didn't notice a huge loft difference either. The irons I have are hand me downs from my grandfather and after playing with them a bit, I feel like they're just not giving me what could potentially be there. The feel is a bit hard/harsh and underwhelming if that makes sense and I can't seem to get decent distances from them. Wondering if I should be looking to invest in some more updated irons and if those should be muscle backs or cavity backs? My knowledge here is minimal. I have never played with modern fairway woods, only the classic clubs that are actually wood and much smaller than modern clubs. I recently removed the 4 and 5 woods from my bag as I was never using them and I don't hit them very well or very far. Wondering if I should look into some more modern fairway wood options? I appreciate any feedback or advice anyone is willing to give, please forgive my lack of knowledge. I am eager to learn! Thank you.  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...