Sign in to follow this  
Followers 0
MarineGolf2005

Advice on shafts for 3 wood

2 posts in this topic

i have been searching anywhere and everywhere to find the right shaft. i just recently put a new fujikura motore F1 on my callaway x hot and it is great, but i really liked the Matrix 7M3 lack tie shaft, which was amazing. The only thing that set me away from the black tie was the price, $450+tax compaired to the fujikura $125+tax. The only difference that i found was i got 10 yrds more on the matrix. Now that i have found the shaft for my driver i am in search for a new shaft for my 3 wood, callaway x hot 15 degree. i am looking for a low to mid torque and a mid-high kick point. It is really hard for me to test out new shafts due to the fact that i am left handed and there is a lack of left handed gear in most fitting centers. i would like to hear some opinions on some shafts that i could check out. I use a stiff shaft and i could use the same fujikura motore F1 but i havent been able to test it some i am not sure how it would work. hope to hear a lot of opinions.

0

Share this post


Link to post
Share on other sites

Want to get rid of this advertisement? Sign up (or log in) today! It's free!

Given that you are looking to really fine-tune your shafts, go online and see if you can find a Callaway Performance Center in your area. Such a center likely would have left-handed clubs to test.

Here's a golf review site with a link to Callaway centers:

http://www.criticalgolf.com/reviews/performance-fitting-centers/callaway-performance-center-review/

(My Internet connection is cloudy today, and I couldn't get any of the links to open).

FYI, I served active duty in the Marine Corps in the 1970s, and retired from the Reserves in 1997. Semper fi!

0

Share this post


Link to post
Share on other sites
Awards, Achievements, and Accolades

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0



  • Want to join this community?

    We'd love to have you!

    Sign Up
  • 2016 TST Partners

    GAME Golf
    PING Golf
    Lowest Score Wins
  • Popular Now

  • Posts

    • Travel Bag that fits in a typical Uber trunk
      I have one of these that I inherited from my dad. I think I am missing the pin. Sadly I don't think they make it anymore but one was sold on ebay for 61 clams. It may work for you if you can locate it.  
    • Reading Greens
      Putting skill is based on three things. Reading greens, hitting your target line, and distance control. Missing one out of the three can bleed into the other two and cause you to be a poor putter. I would say green reading isn't going to hurt you as much as having poor distance control or very inconsistent start lines.  My Edel putter influenced my putting more because I lost a ton of strokes three putting. That wasn't misreading greens for me.   
    • Golf backswing tips
      Here is another youtube video that is very simple and straight forward that I really like..concentrating on getting to the first position really helps me keep centered too....just short and simple    
    • Reading Greens
      So your prior experience didn't matter in getting the most out of it. That's good to know. Generally putting skills do also track with HCP (assuming a fairly balanced game) for the average population at each HCP. I think AimPoint has great value. I'm just not ready to spring for the big bucks yet. I think the visualizations they put out like the ones I posted are very helpful for golfers playing for a few years like me to get some of the basic concepts. I have a chance!  Interesting. I probably suffer from both, but distance control may have been a bit more of an issue, because I hadn't even correctly identified that my putter had an off-center sweet spot when I started.
    • Bought the wrong flex wedge... should I return?
      I hope it's not the club maker that was in that condition? In general, the salesmen don't really know anything about club making. Ask specifically for the club maker and he can do what you ask. In any case what @70sSanO suggested makes perfect sense, but I'm not sure how much you planned to cut. You'd need to cut quite a bit to get a different flex number. Here's my favorite shaft the DG. http://www.golfshaftreviews.info/index.php/dynamic-gold-golf-club-shaft-review/ Notice that you'd need to cut an inch or so to get kind of the same flex from one to the other. The actual difference is about 2", but you have to fudge the overall effect of having a shorter shaft. For instance, S300 might be perfect for your shorter irons, but might be too flexible for the long irons. That effect will be somewhat unpredictable and might require a lot of iteration.   A modern Wedge flex has a specific kick point. They have a strange taper to help spin the ball better. http://www.mizunoforum.com/viewtopic.php?f=4&t=1453 In the past there probably was no difference. . .   That's better only more expensive, and shortening from the tip will stiffen it only a little bit. If you are getting something like an S300, it might still not be optimal as it is generally lower launching. You might want to have a higher launching shaft for a wedge. R flex might have been okay. Give the R a good testing before switching out to see if you like the stiff more or not? My advice is to try a bunch of wedges (used or otherwise) at your local store to find one that gives you your best launch conditions for a wedge. I haven't done this myself, but I have many friends who have gotten them fitted and they love their wedges now. The stock Mack Daddy and MD 2 seem to be perfect for me anyway. Haven't tried the others as they were not on sale, but I would guess any of the stock shafts would be fine for me.
  • TST Blog Entries

  • Images

  • Today's Birthdays

    No users celebrating today
  • Blog Entries