Jump to content
IGNORED

Iron Choices


Note: This thread is 5364 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Hello,
As i stated aim 50 years old, and have barrowed clubs this season, well its time to break down and pull the trigger. Iam very active and have picked up the game quickly and paly about 3 times a week, and spend about 4 hours a week at the range also, its like i have found a new Love. The wife is going to buy me mine own set of clubs(Irons) as i have a new driver (TaylorMade), and new putter(Cleveland), But my qustion is do i want a steel shaft for my Irons, or ? She said i cold spend around $500, I want to get a set that i will be happy with for a few years and become better. Should i go and be fitted at a proshop, There's a Golf Galaxy and GolfSmith, just down the road, but there are some Great prices on Ebay As well. Help.Help.

Dave
Link to comment
Share on other sites


I'd say go get fitted at Golf Galaxy. I'd also suggest Steel shafts in irons, not a big fan of graphite in the irons.

You should be able to find a nice set for 500 dollars. Good Luck.

Driver Ping G10 10.5*
Hybrids Ping G5 (3) 19* Bridgestone J36 (4) 22*
Irons Mizuno MP-57 5-PW
Wedges Srixon WG-504 52.08 Bridgestone WC Copper 56.13
Putter 33" Scotty Cameron Studio Select #2

Link to comment
Share on other sites


I was in the same boat about 6 months ago. I'm 40 and have went through the same cycle. I researched irons and found the best deal for me was the Callaway BB iron set. I found a new set on eBay for about 350 (retail about 600). So far I'm really liking them, they are forgiving and really launch the ball when I don't screw up (lol). For beginner improvement clubs I think they are a great deal. Of course I'll be playing with them for the next few years...

-Pat

- Pat

41 yrs. old, 3rd year playing and learning!
In my beginner bag:
--------------------------Driver/3W/3H - Nike Sumo SQ4H - TaylorMade Rescue5 iron - PW 2008 Callaway BB w/iBridsLW/SW/GW - 2010 Cleveland CG15Putter - 2008 Taylormade Rossa Monte Carlo 7---------------------------

Link to comment
Share on other sites


If you end up going to Golf Galaxy, become an advantage member on their website. There was a coupon I found the other day that was spend $500 get $100 back, spend $250 get $50 back, or spend $100 get $20 back, this definitely made my iron buying more enjoyable.
Driver - Sumo 5900 (9.5°) S
3W - 909 F2 (15.5°) X
Hybrid - 4DX Ironwood 3 (20°) S
Irons: 4-PW - Victory Reds Full Cavity S
Wedge - CG14 (56°)Putter - Red X5 35"Ball - e6+Scores with New Bag:95, 83, 86
Link to comment
Share on other sites


As stated, any way you go, get fitted. But I have now found, and I am sure there are a lot all over, but local club makers. The local here has a good limited lifetime warrenty, has GI clubs to Forged blades and the most expensive is like 600. As for shafts, they should be able to tell you if steel or graphite would be better.

Bag: Ogio
Driver: Cleveland HiBore XLS 9.5 gold stiff
3W: Pro Select 15*
Irons: Pro Select 3-PW
Wedge:Adams Tom Watson set GW, SW, LWPutter: Cleveland VP 1balls: E6+ or Srixonshoes: Adidas powerband"Stop looking at my ears and play!"Home course. Antler Creek; tees; Black 77.5/150, Gold...

Link to comment
Share on other sites


As stated, any way you go, get fitted. But I have now found, and I am sure there are a lot all over, but local club makers. The local here has a good limited lifetime warrenty, has GI clubs to Forged blades and the most expensive is like 600. As for shafts, they should be able to tell you if steel or graphite would be better.

TOTALLY AGREE. The most important thing when buying irons is getting properly fitted for them. Once you know your "specs" (i.e. +1/2", 2* upright), you can apply those to most manufacturers' offerings and find clubs that will fit you on Ebay if you choose. A proper fitting will also reveal if steel or graphite shafts are best for you. Demo everything and enjoy the process!

Link to comment
Share on other sites


I agree with most of the prior posts, regarding getting fit, but at 50 years old, you have to take into account any earlier injuries or problems when it comes to choosing between steel and graphite shafts. If you have any history of broken bones, arthritis, joint issues, or back trouble, give graphite a good look. I have switched back and forth several times in the last few years, trying to find a steel shaft that would not cause hand and arm pain after several rounds, and have finally settled on a set of graphite shafts that perform well and allow me to play pain free. Sorry for the long post, but many of the younger guys here will steer you to steel, as thay have not been through some of the stuff us 50 somethings have. Good luck in your search for the right clubs for you..

:tmade: 09 Burner
:cobra: Speed LD F 3 wood
:cobra: Baffler 20 degree hybrid
:cobra: Baffler TWS 23 hy
:ping: G15 5-UW
:snake_eyes: 56 deg SW 
:snake_eyes: 60 - 12 wedge  
:scotty_cameron: Studio Select Newport 2

Link to comment
Share on other sites


Thanks guys for your words of wisdom! (Leo3) arthritis is the big problem with my knee's as i have had two major surgery's on my right Knee, and have very little cartliage in there, But after getting shots in my Knee, so far so good, the Knee is holding up well, but cool morning and rainy days is a different story. I plan on taking a good look at the graphite shafts, On my driver i have a graphite shaft, and after getting used to it i love it, I did have to change a few things on my swing nothing major, just seemed that i was slicing drives, But i also noticed i gained alittle more distance appx 25/30 yards, and with a little fade also.
Link to comment
Share on other sites


Does getting fitted really make that much of a difference given that we mostly have the same length arms? I mean a 6" man and 5"6 man generally have the same arm length. Do they adjust for your swing or style? I don't know, I'm a beginner.

- Pat

41 yrs. old, 3rd year playing and learning!
In my beginner bag:
--------------------------Driver/3W/3H - Nike Sumo SQ4H - TaylorMade Rescue5 iron - PW 2008 Callaway BB w/iBridsLW/SW/GW - 2010 Cleveland CG15Putter - 2008 Taylormade Rossa Monte Carlo 7---------------------------

Link to comment
Share on other sites


I'll tell you what- buying irons is a sublime experience! Take the previous advice and demo as many clubs as you can until you find one you like. I am 36 years old and switched this year to graphite shafts. I gained an incredible amount of distance- so much so that I had to spend alot of time on the range figuring out my new yardages. I switched from TaylorMade SuperSteel Irons with steel shafts to my current Cleveland Hi-Bores with graphite and didn't look back. I didn't lose any accuracy and gained TONS of yardage.
If you can justify the cost, graphite is the way to go!
Bag: Callaway Warbird
Driver: Cleveland Launcher 9.5*
3 Wood: Cleveland Launcher 14*
5 Wood: Taylor Made r7 Draw ?*
Irons (3-PW): Cleveland Hi-Bore XLS GraphiteSW: Cleveland 588 56*LW: Cleveland 588 60*Putter: Ping Craz-EBall: Taylor Made TP BlackGlove: FootJoy StasofDate for a Day on the Course:...
Link to comment
Share on other sites


Getting fitted involves much more than shaft length.

Other factors include:
* Lie angle (upright, normal or flat) - This ensures the iron hits the ground squarely, rather than on the toe or on the heel. Several pros have told me proper lie angle is one of the main benefits of club fitting
Note: This is different from club loft.
* Shaft flex - Match it to your swing speed.
* Kick point - Does the shaft flex low (high ball flight), middle (medium) or high (low ball flight)

Note: Type of golf ball also will help determine height of normal shot.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Link to comment
Share on other sites

Awards, Achievements, and Accolades

Note: This thread is 5364 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • First off please forgive me if this is not a proper post or not in the proper location, still learning the ropes around here. Second, it's important that I mention I am very new to the game with only about 10 rounds of golf under my belt, most being 9 holes. Only this year have I started playing 18. That being said, I am hooked, love the game and am very eager to learn and improve. To give you an idea of my skill, the last 2 18 rounds I played were 110 and 105. Not great at all, however I am slowly improving as I learn. Had been having bad slicing issues with the driver and hybrids but after playing some more and hitting the range, I've been able to improve on that quite a bit and have been hitting more straight on average. Irons have always come easier to me as far as hitting straight for some reason. Wedges have needed a lot of improvement, but I practice chipping about 20-30 mins about 3-5 times a week and that's helped a lot. Today I went to the range and started to note down some distance data, mind you I am averaging the distances based off my best guess compared to the distance markers on the range. I do not currently own a range finder or tracker. From reading some similar posts I do understand that filling gaps is ideal, but I am having a some issues figuring out those gaps and understanding which clubs to keep and remove as some gaps are minimal between clubs. Below is an image of the chart I put together showing the clubs and average distances I've been hitting and power applied. For some reason I am hitting my hybrids around the same distances and I am not sure why. Wondering if one of them should be removed. I didn't notice a huge loft difference either. The irons I have are hand me downs from my grandfather and after playing with them a bit, I feel like they're just not giving me what could potentially be there. The feel is a bit hard/harsh and underwhelming if that makes sense and I can't seem to get decent distances from them. Wondering if I should be looking to invest in some more updated irons and if those should be muscle backs or cavity backs? My knowledge here is minimal. I have never played with modern fairway woods, only the classic clubs that are actually wood and much smaller than modern clubs. I recently removed the 4 and 5 woods from my bag as I was never using them and I don't hit them very well or very far. Wondering if I should look into some more modern fairway wood options? I appreciate any feedback or advice anyone is willing to give, please forgive my lack of knowledge. I am eager to learn! Thank you.  
    • I would think that 3 in a row with the same players might get some behind the scenes examination from the SCGA if they were suspect.  Are there any clubs questioning the results?
    • What simple fact? A golf match is not a coin flip — there is a fact for you. I'm trying to help you, and you're throwing out what could easily be called sour grapes. Come with FACTS, not weak analogies. Then you've got nothing. Hopefully they've done a better job of making their case. 😛 
    • It's pretty close. The odds of a 50/50 shot going your way 21 times are greater than 1 in a million!  I guess your point is, that simple fact is not enough to declare these guys dirty rotten sandbaggers. I disagree, but fair enough. I posted it here on the message board to get different perspectives, after all.  I probably won't be digging further into specific scores. I have no dog in this fight beyond a generalized contempt for sandbagging. With that said, it would not surprise if a lot of clubs shared my concern and were grousing about it to the SCGA.
    • I had an article on Cam Smith pop up along with this..... Current major eligibility list for all LIV Golf players Here's a look at which majors, if any, all LIV Golf players are eligible.  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...