Jump to content
IGNORED

What is soft stepping?


Note: This thread is 4882 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

As the title says, what is soft stepping? What are the pros/cons of having this done?

ZL Driver 10.5 Voodoo stiff shaft
F speed 3 wood stiff shaft
909 H Rescue
AP2 4-pw KBS Tour Stiff shafts
Forged 55 SV 58 SM 60 Tour action 64 Newport 1.member of www.shirlandgolfclub.co.uk

Link to comment
Share on other sites


  • Administrator
Taking a 3-iron's shaft and putting it in a 4-iron and doing that throughout the set. You can soft-step twice and that'd be a 3-iron shaft in the 5-iron.

You still cut to the right length, but it leads to an "in-between" flex that's slightly softer. So if you have a Dynamic Gold shaft and the X100 is too stiff but the S300 is too light, you might soft-step an X100 once to get an "in between" flight.

Obviously at the edges of the club range there are limitations.

Hard stepping is the opposite direction, of course.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Link to comment
Share on other sites

Awards, Achievements, and Accolades

When you say put a 3 iron shaft in a 4 iron, you mean trimming the tip to a 3 iron length?

Cleveland Launcher DST 10.5*

Ping G15 17*

Mizuno MP-53 4-PW with GS-95

Mizuno MPT-11 Black Nickel 52* and 58* with GS-95

Ping Redwood Anser

Link to comment
Share on other sites


They put an actual 3 iron shaft in, and cut it down to a 4 iron's length. That way its a bit less stiff than its supposed to be, but stiffer than the next option.

Kyle Paulhus

If you really want to get better, check out Evolvr

:callaway: Rogue ST 10.5* | :callaway: Epic Sub Zero 15* | :tmade: P790 3 Driving Iron |:titleist: 716 AP2 |  :edel: Wedges 50/54/68 | :edel: Deschutes 36"

Career Low Round: 67 (18 holes), 32 (9 holes)

Link to comment
Share on other sites

Awards, Achievements, and Accolades

When I have bought iron shafts from Golfsmith, they have all been the same and you just trim the tip end different lengths for different clubs. Do companies use different shafts?

Cleveland Launcher DST 10.5*

Ping G15 17*

Mizuno MP-53 4-PW with GS-95

Mizuno MPT-11 Black Nickel 52* and 58* with GS-95

Ping Redwood Anser

Link to comment
Share on other sites


When I have bought iron shafts from Golfsmith, they have all been the same and you just trim the tip end different lengths for different clubs. Do companies use different shafts?

I dont have a clear understanding of this as well. I think you have to buy the correct size shaft for each iron because if your cutting shafts that are all the same size your going to have all different flexes, right?? I mean thats kind of the logic behind softstepping and hardstepping.

Link to comment
Share on other sites


I dont have a clear understanding of this as well. I think you have to buy the correct size shaft for each iron because if your cutting shafts that are all the same size your going to have all different flexes, right?? I mean thats kind of the logic behind softstepping and hardstepping.

Seeing as you are placing the 3 iron shaft into your 4 iron, the process will be the same for your other clubs. The amount of the shaft you need to cut down will remain costant seeing as the shaft length decreases by a constant value as you progress through the set. If you are softstepping a 4-PW set, you'll need to buy shafts from 3-9 length. Cutting the same distance off the shaft on each club gives you a consistent flex.

Link to comment
Share on other sites


I understand that, but I've always bought True Temper shafts from golfsmith for irons that I've made and I've always bought say 8 shafts. They all come the same size and I trim the tip different lengths depending on what kind of club they were going in. I'm just wondering where all this 3 or 4 iron shaft comes in? I know if I were to be project X shafts they would be for the individual irons, but I've never seen it for the classic TT shafts.

Cleveland Launcher DST 10.5*

Ping G15 17*

Mizuno MP-53 4-PW with GS-95

Mizuno MPT-11 Black Nickel 52* and 58* with GS-95

Ping Redwood Anser

Link to comment
Share on other sites


.370P shafts are tip trim to flex then butt trim to final length thus all the same lengths. .355T are butt trim only thus the different lengths.

When I have bought iron shafts from Golfsmith, they have all been the same and you just trim the tip end different lengths for different clubs. Do companies use different shafts?

Your Titleist irons are .355t, if you reshafted with paralell shafts you don't have the shaft seated in the head correctly. About the the 1st 5/8" is of a .355t shaft is taperd and the rest of the tip/paralell section is .370.

:tmade: R15 14* Matrix Black Tie 7m3

:adams: Speedline Super S 3w & 5w Matrix Radix HD S VI

:callaway: X-12 4-PW Memphis 10

IONNOVEX  Type S GDT 50*, 54* & 62* Mitsubishi Rayon Kuro Kage Black 80ir

:odyssey: Tri-Ball SRT

-Landon

Link to comment
Share on other sites


Interesting. Yes, I was speaking of past experiences where I have put together clubs myself. My Titleist irons, which I don't even have yet, are coming straight from Titleist.

Cleveland Launcher DST 10.5*

Ping G15 17*

Mizuno MP-53 4-PW with GS-95

Mizuno MPT-11 Black Nickel 52* and 58* with GS-95

Ping Redwood Anser

Link to comment
Share on other sites


Note: This thread is 4882 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • Day 119: 4/24/24 Chipping and pitching followed by putting through 50 mm gates.
    • @boogielicious and I are definitely in for the Stay & Play and will need the extra night's stay on Friday. I don't know what the plans are for our group on Friday but even if we don't make it for dinner with the rest of the Friday arrivals, I'll be more than happy to meet up somewhere for a beer or something.
    • Taking your dispersion and distance in consideration I analyzed the 4 posible ways to play the hole, or at least the ones that were listed here. I took the brown grass on the left as fescue were you need to punch out sideways to the fairway and rigth of the car path to be fescue too.  Driver "going for the green"  You have to aim more rigth, to the bunker in order to center your shotzone in between the fescue.  Wood of 240 over the bunkers I already like this one more for you. More room to land between the fescue. Balls in the fescue 11% down from 30% with driver. Improve of score from 4.55 to 4.40. 4 iron 210 yards besides the bunkers.    Also a wide area and your shot zone is better than previous ones. This makes almost the fescue dissapear. You really need to hit a bad one (sometimes shit happens). Because of that and only having 120 yards in this is the best choice so far. Down to 4.32 from 4.40. Finally the 6 Iron 180 yards to avoid all trouble.    Wide area an narrow dispersion for almost been in the fairway all the time. Similar than the previous one but 25 yards farther for the hole to avoid been in the bunkers. Average remains the same, 4.33 to 4.32.  Conclusion is easy. Either your 4iron or 6 iron of the tee are equaly good for you. Glad that you made par!
    • Wish I could have spent 5 minutes in the middle of the morning round to hit some balls at the range. Just did much more of right side through with keeping the shoulders feeling level (not dipping), and I was flushing them. Lol. Maybe too much focus on hands stuff while playing.
    • Last year I made an excel that can easily measure with my own SG data the average score for each club of the tee. Even the difference in score if you aim more left or right with the same club. I like it because it can be tweaked to account for different kind of rough, trees, hazards, greens etc.     As an example, On Par 5's that you have fescue on both sides were you can count them as a water hazard (penalty or punch out sideways), unless 3 wood or hybrid lands in a wider area between the fescue you should always hit driver. With a shorter club you are going to hit a couple less balls in the fescue than driver but you are not going to offset the fact that 100% of the shots are going to be played 30 or more yards longer. Here is a 560 par 5. Driver distance 280 yards total, 3 wood 250, hybrid 220. Distance between fescue is 30 yards (pretty tight). Dispersion for Driver is 62 yards. 56 for 3 wood and 49 for hybrid. Aiming of course at the middle of the fairway (20 yards wide) with driver you are going to hit 34% of balls on the fescue (17% left/17% right). 48% to the fairway and the rest to the rough.  The average score is going to be around 5.14. Looking at the result with 3 wood and hybrid you are going to hit less balls in the fescue but because of having longer 2nd shots you are going to score slightly worst. 5.17 and 5.25 respectively.    Things changes when the fescue is taller and you are probably going to loose the ball so changing the penalty of hitting there playing a 3 wood or hybrid gives a better score in the hole.  Off course 30 yards between penalty hazards is way to small. You normally have 60 or more, in that cases the score is going to be more close to 5 and been the Driver the weapon of choice.  The point is to see that no matter how tight the hole is, depending on the hole sometimes Driver is the play and sometimes 6 irons is the play. Is easy to see that on easy holes, but holes like this:  you need to crunch the numbers to find the best strategy.     
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...