Jump to content
IGNORED

Ballmark higher on face?


kennay92
Note: This thread is 4821 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

If the contact of the ball/ball mark on the face of the iron is higher than the leading edge is that a sign of anything? i.e. flipping, shaft lean etc.

:cobra: Speed ld-f 10.5 Stiff
:snake_eyes: 3 & 5 Woods
:adams:A4 3 hybrid
:bridgestone: J33 Forged Irons 4-pw
:ping: 50th Aniv. Karsten Ansr Putter56*, 60* wedges

Link to comment
Share on other sites


Hard to tell without seeing the actual ball mark, but here is an example. [IMG]http://i56.tinypic.com/nbbuow.jpg[/IMG] That is an old club Tiger played with, if you are somewhere around that position, it's good. Hitting the ball higher on the face can be an issue caused by the swing bottoming out too far back, but it would be easier to identify with a couple of high speed swing videos.

Ogio Grom | Callaway X Hot Pro | Callaway X-Utility 3i | Mizuno MX-700 23º | Titleist Vokey SM 52.08, 58.12 | Mizuno MX-700 15º | Titleist 910 D2 9,5º | Scotty Cameron Newport 2 | Titleist Pro V1x and Taylormade Penta | Leupold GX-1

Link to comment
Share on other sites

Awards, Achievements, and Accolades



Originally Posted by Zeph

Hard to tell without seeing the actual ball mark, but here is an example.

That is an old club Tiger played with, if you are somewhere around that position, it's good. Hitting the ball higher on the face can be an issue caused by the swing bottoming out too far back, but it would be easier to identify with a couple of high speed swing videos.



Above is perfect and I'm not just saying it because the club belonged to Tiger!

"Success is going from failure to failure without loss of enthusiasm." – Winston Churchill

Link to comment
Share on other sites




Originally Posted by kennay92

If the contact of the ball/ball mark on the face of the iron is higher than the leading edge is that a sign of anything? i.e. flipping, shaft lean etc.



I had this problem once.  It was caused by flipping.  Flipping adds loft allowing the ball to slide higher up on the face.  If you have a new-found high ball flight, check your swing sequencing and shoulder turn.  Those scoring marks look great height-wise for most high-VCOG blades.  The lateral location depends on the horizontal COG.  It was historically more towards the hosel, but with cut muscles, has moved more towards the middle..

[ Equipment ]
R11 9° (Lowered to 8.5°) UST Proforce VTS 7x tipped 1" | 906F2 15° and 18° | 585H 21° | Mizuno MP-67 +1 length TT DG X100 | Vokey 52° Oil Can, Cleveland CG10 2-dot 56° and 60° | TM Rossa Corza Ghost 35.5" | Srixon Z Star XV | Size 14 Footjoy Green Joys | Tour Striker Pro 5, 7, 56 | Swingwing

Link to comment
Share on other sites




Originally Posted by bunkerputt

Quote:

Originally Posted by kennay92

If the contact of the ball/ball mark on the face of the iron is higher than the leading edge is that a sign of anything? i.e. flipping, shaft lean etc.

I had this problem once.  It was caused by flipping.  Flipping adds loft allowing the ball to slide higher up on the face.  If you have a new-found high ball flight, check your swing sequencing and shoulder turn.  Those scoring marks look great height-wise for most high-VCOG blades.  The lateral location depends on the horizontal COG.  It was historically more towards the hosel, but with cut muscles, has moved more towards the middle..

With older blades such as the Wilson Dyna Power that I played with for years.  They added to lead the shaft at the hosel to get the swing weight consistent through the set, thus moving the center of mass progressively towards the hosel as the iron got longer.

Link to comment
Share on other sites


Note: This thread is 4821 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • Wordle 1,040 5/6 ⬜⬜⬜🟨🟨 🟨⬜🟩⬜🟨 ⬜🟨🟩⬜🟩 ⬜⬜🟩⬜🟩 🟩🟩🟩🟩🟩 really missed the line on the Par Putt
    • I agree with @pganapathy about removing some clubs. I would recommend removing the 2, 3, 4 and 5 irons for now. Play with Driver 3W 5W 3H 5H 6 iron 7 iron 8 iron 9 iron PW ( you don’t have listed) 52 56 Putter Th 60 wedge can be difficult for new players, but you could keep that If your 3H is adjustable, increased the loft to be more like a 4H. Play with these on course and see if you can get a feel of the actual yardages for each club and especially the gaps between them. It may take 10 or more rounds. A par 3 course is helpful for determining the gaps in the irons and some woods too. A device like a Shot Scope H4 can really help give you your actual yardage on course.
    • Wordle 1,040 5/6* ⬛🟦⬛⬛🟧 ⬛⬛🟧⬛🟧 ⬛🟦🟧⬛🟧 ⬛⬛🟧🟧🟧 🟧🟧🟧🟧🟧
    • Day 12: Same as last couple days, but focus was on recentering aspect of flow. When I recenter earlier I make decent contact most swings but if I recenter late or not at all it’s a roll of the dice. 
    • A couple of things.  Some of the clubs in your bag should be dropped immediately.  A 2-iron for example with what obviously seems to be a lower swing speed or possibly not great swing yet is a definite no-no.  To be hitting that 120-140 yards, which I assume includes run, is a sign that you are not getting the ball airborne at the correct angle to maximise distance.  The reason your 3 and 5 hybrid are going the same distance is that your launch angle is better with the 5.  Loft is your friend. Ideally I would suggest going to a golf or sporting store where you can hit golf balls on a simulator without being disturbed to understand your club carry distances and hopefully swing speed.  With that information we can definitely guide you better.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...