or Connect
TheSandTrap.com › Golf Forum › The Pro Shop › Clubs, Grips, Shafts, Fitting › Custom fitting with range balls?
New Posts  All Forums:Forum Nav:

Custom fitting with range balls?

post #1 of 7
Thread Starter 
I'll be attending a Titleist demo day in a couple of weeks and maybe getting fit for a new driver. They will set up shop with a Trackman launch monitor at a nearby range with new 2-piece range balls.

The alternative is on an indoor launch monitor/simulator, which I don't trust to be as accurate as Trackman.

Any thoughts on getting fit with range balls for a driver? Will the results with range balls be comparable to the balls I play? They do of course have very different specs. I simply don't have the option to hit my own balls outdoors on a launch monitor. It's either simulated ball flight with my balls or actual ball flight with Trackman and range balls.
post #2 of 7

Obviously as you mention the best way to fit is with the ball you play. But, given your two choices I would go the outdoor range route. You will have a Titleist professional helping you and you will also be able see your actual ball flight. If it was a set of irons I might have a different answer. But with your driver, I would go the outdoor/range ball route.

post #3 of 7
Seconded. I'd rather do an outdoor driver fitting with range balls than an indoor fitting with good balls. You'll get a somewhat restricted flight, but still a far better idea of general trajectory and shape than you do looking at the monitor in a cage.
post #4 of 7

Had a thought after my post. Do you have a shag bag sitting around with the balls that you took out of play? I have one full of Pro V1X. Might have 100 balls in it by now. What if you narrowed it down to the driver and shaft with the range balls and then took maybe 5 or so of your own retired balls and gave the driver a test?

post #5 of 7

Good advice provided.  Outdoor range with Trackman, plus some of your own shag balls if you are brand and model-partial.  You might as well get the most accurate results since it will benefit your fitting.

post #6 of 7
Thread Starter 
Quote:
Originally Posted by Wet Doggg View Post

Had a thought after my post. Do you have a shag bag sitting around with the balls that you took out of play? I have one full of Pro V1X. Might have 100 balls in it by now. What if you narrowed it down to the driver and shaft with the range balls and then took maybe 5 or so of your own retired balls and gave the driver a test?

Don't really have any shag balls in the same model as I play. I lose the ball long before it becomes too beat up to keep playing on. But I do have 30-40 Pro V1 07/08 models which I bought cheap from eBay some years ago. They just sit in a box and I never play them. Also got a bunch of Bridgestone E5 that I don't play with. I'll bring along some of those and hit one here and there during the fitting. I normally play with Pro V1x or Taylormade Penta, so the 07/08 V1 and E5 are not exactly similar to the balls I play, but they're closer than the range balls anyways.

Thanks for the advice, I was leaning towards the range all the time.
post #7 of 7
I got fitted for my driver at the range with trackman and with a certified Titleist certified Fitter.

Good result even with range balls .
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Clubs, Grips, Shafts, Fitting
TheSandTrap.com › Golf Forum › The Pro Shop › Clubs, Grips, Shafts, Fitting › Custom fitting with range balls?