Jump to content
IGNORED

Question on fitting


marcv68
Note: This thread is 4459 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Hey guys and gals,can u still get fit to some clubs that u purchased off of e-bay.I mean there will prolly b a price associated with this and I am prepared to pay.But is this commonplace or will I get dirty looks bringing in a set to get fitted and I already pulled the trigger u know?Or at this point am I already screwed.

WITB:

Taylormade R11 Driver

Taylormade RBZ 3 Wood

Tour Edge Exotics Trilogy #3 Hybrid

Tour Edge Exotics Trilogy #4 Hybrid

Taylormade Tour Preferred CB 5-PW

Cally Jaws X Series Wedges 50,54,58*

Ping I Series Putter 34"

Taylormade Penta Ball and TP Black LDP

Rain Gear and a bunch of other crap

 

Link to comment
Share on other sites


  • Moderator


Originally Posted by marcv68

Hey guys and gals,can u still get fit to some clubs that u purchased off of e-bay.I mean there will prolly b a price associated with this and I am prepared to pay.But is this commonplace or will I get dirty looks bringing in a set to get fitted and I already pulled the trigger u know?Or at this point am I already screwed.

Depends on which club but yeah I would say that shouldn't be a problem to get fit and get them adjusted to what you need.

Mike McLoughlin

Check out my friends on Evolvr!
Follow The Sand Trap on Twitter!  and on Facebook
Golf Terminology -  Analyzr  -  My FacebookTwitter and Instagram 

Link to comment
Share on other sites

Awards, Achievements, and Accolades

The local club fitter in my area welcomes a fitting with existing clubs.  Last fall my brother went in for a fitting, he plays Mizuno MP 68's and Taylormade R9 Driver and 3 wood.  I believe the fitting was $40 and basically what he found out was the irons fit him just right, the only change he made was the shaft on his driver.  It was the stock shaft and was suppose to be stiff, but was actually more on the regular side, so he bought a new shaft that was tuned for his swing speed.

Craig 

Yeah, wanna make 14 dollars the hard way?

Link to comment
Share on other sites


Thanks guys I asked because i grabbed an awesome deal.I picked up used Taylormade tour preferred CB,s today at a great price.i live about 30 mins, from the e-bay store called 3BallsGolf.Affectionately known here as joe and Leighs discount Golf.I picked em up for a steal at 400.they retail new at 649.00.These r practically new,even Leigh said that these r practically new.Real great peeps to deal with.I gotta post my WITB for 2012,im effin stoked

WITB:

Taylormade R11 Driver

Taylormade RBZ 3 Wood

Tour Edge Exotics Trilogy #3 Hybrid

Tour Edge Exotics Trilogy #4 Hybrid

Taylormade Tour Preferred CB 5-PW

Cally Jaws X Series Wedges 50,54,58*

Ping I Series Putter 34"

Taylormade Penta Ball and TP Black LDP

Rain Gear and a bunch of other crap

 

Link to comment
Share on other sites


Since you are only 30 minutes away if you do find that you need them fitted might as well take them in to the pro shop at Joe and Leighs. Best to phone ahead. Looking at the website for their brick and mortar store it is very impressive. Have fun with the new clubs.
Link to comment
Share on other sites


Quote:

Thanks guys I asked because i grabbed an awesome deal.I picked up used Taylormade tour preferred CB,s today at a great price. ... .I picked em up for a steal at 400.they retail new at 649.00 ....

These are a great deal if they are - as is - basically what you need. You can probably get a static fitting for $40 to $50, with a little extra cost if you need shafts trimmed or other minor adjustments. Also, make sure the loft and lie match factory specs.

But, if you need different shafts, things can get expensive. If you reshaft in the True Temper or KBS neighborhood, these can run you $15 to $35 a shaft, plus $10+ reshafting charge per club. If the grips can't be salvaged, or you want different ones, that's another $5+, along with any installation fee.

If you know that this set is about what you need, it's a great deal. But if you need some rework, {$400 + Rework Costs} could easily total more than the $649 retail price .

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Link to comment
Share on other sites

Awards, Achievements, and Accolades

Thx. guys all great info especially u tiger.I was gonna have them do the fitting then but I had to get to a doctor,s appt.Leigh said c,mon back so we can check the lie and loft angles when I get a chance.It,s still early on in the season here in Mass. so i,ve got plenty of time.I,m goin in Friday morn. to have them do that.I also signed up for a 5 pack of lessons @ my local GolfTown.Can,t wait for the great weather.

WITB:

Taylormade R11 Driver

Taylormade RBZ 3 Wood

Tour Edge Exotics Trilogy #3 Hybrid

Tour Edge Exotics Trilogy #4 Hybrid

Taylormade Tour Preferred CB 5-PW

Cally Jaws X Series Wedges 50,54,58*

Ping I Series Putter 34"

Taylormade Penta Ball and TP Black LDP

Rain Gear and a bunch of other crap

 

Link to comment
Share on other sites




Originally Posted by WUTiger

Quote:

These are a great deal if they are - as is - basically what you need. You can probably get a static fitting for $40 to $50, with a little extra cost if you need shafts trimmed or other minor adjustments. Also, make sure the loft and lie match factory specs.

I would recommend that you go with a dynamic fitting by hitting off a lie board and having the lie adjusted accordingly. You should always check the lofts to make sure they are factory spec unless you are anal like me and have your own idea on how to set them up.

I weakened my set 6 iron to pw one degree to start at 48* and then spaced 4 degrees until the 5 iron which is 28* then bent the 4 and 3 a degree strong to put the 4 at 24* with the 3 at 21*.  I went from 47-43-39-35-31-28-25-22 to 48-44-40-36-32-28-24-21 for a little more spacing between the 4-5-6 irons. Again, only if you are a little nuts.

Cobra LTDx 10.5* | Big Tour 15.5*| Rad Tour 18.5*  | Titleist U500 4-23* | T100 5-P | Vokey SM7 50/8* F, 54/10* S, SM8 58/10* S | Scotty Cameron Squareback No. 1 | Vice Pro Plus  

Link to comment
Share on other sites


Quote:

I would recommend that you go with a dynamic fitting by hitting off a lie board and having the lie adjusted accordingly. You should always check the lofts to make sure they are factory spec unless you are anal like me and have your own idea on how to set them up.

I weakened my set 6 iron to pw one degree to start at 48* and then spaced 4 degrees until the 5 iron which is 28* then bent the 4 and 3 a degree strong to put the 4 at 24* with the 3 at 21*.  I went from 47-43-39-35-31-28-25-22 to 48-44-40-36-32-28-24-21 for a little more spacing between the 4-5-6 irons. Again, only if you are a little nuts.


Oh man, it's super anal, but I REALLY like those lofts you chose.  My set goes from 46˚ PW to 20˚ 3i right now with 4˚ between PW-5i and 3˚ between 5i-3i.  Can you get forged clubs bent 2 degrees, as I'd need for PW-5i?

Those lofts would make me feel slightly less manly but would space my wedges perfect for 48˚ PW, 54˚ SW, and 60˚ LW, and would also give me more options at the long end, since I love the 19˚ hybrid I carry which means I almost never hit my 20˚ 3i and haven't since I got over the excitement of having new (for me) irons.  I could always drop the 3i entirely and get a gap wedge, but I'd prefer how you have it set up.  I know the 6˚ gaps in the wedges seems high, but I'm pretty good at the just take it easy and hit it 10 yards short shot, but I'm bad at the 80% distance shot, which is what is required now when I have a shot from 110-115  and I have to choose between my 54˚, with a stock distance of ~105, and my 46˚ PW, with a stock distance of ~130+.

  • Upvote 1

Matt

Mid-Weight Heavy Putter
Cleveland Tour Action 60˚
Cleveland CG15 54˚
Nike Vapor Pro Combo, 4i-GW
Titleist 585h 19˚
Tour Edge Exotics XCG 15˚ 3 Wood
Taylormade R7 Quad 9.5˚

Link to comment
Share on other sites

Awards, Achievements, and Accolades



Originally Posted by mdl

Quote:

Oh man, it's super anal, but I REALLY like those lofts you chose.  My set goes from 46˚ PW to 20˚ 3i right now with 4˚ between PW-5i and 3˚ between 5i-3i.  Can you get forged clubs bent 2 degrees, as I'd need for PW-5i?

Those lofts would make me feel slightly less manly but would space my wedges perfect for 48˚ PW, 54˚ SW, and 60˚ LW, and would also give me more options at the long end, since I love the 19˚ hybrid I carry which means I almost never hit my 20˚ 3i and haven't since I got over the excitement of having new (for me) irons.  I could always drop the 3i entirely and get a gap wedge, but I'd prefer how you have it set up.  I know the 6˚ gaps in the wedges seems high, but I'm pretty good at the just take it easy and hit it 10 yards short shot, but I'm bad at the 80% distance shot, which is what is required now when I have a shot from 110-115  and I have to choose between my 54˚, with a stock distance of ~105, and my 46˚ PW, with a stock distance of ~130+.

You can go 1* no problem and sometimes 2*. You just need to make sure you are not affecting the bounce too much.

Here are some of my anal rants dating back 4 years ago on modern lofts for your reading pleasure:

http://thesandtrap.com/t/9770/new-735s-coming

http://thesandtrap.com/t/9728/traditional-lofts-versus-modern-lofts



Originally Posted by glock35ipsc

Aaahhhhh, I'm in good company then!


Well, it is the Sand Trap!  There are quite a few here.

Cobra LTDx 10.5* | Big Tour 15.5*| Rad Tour 18.5*  | Titleist U500 4-23* | T100 5-P | Vokey SM7 50/8* F, 54/10* S, SM8 58/10* S | Scotty Cameron Squareback No. 1 | Vice Pro Plus  

Link to comment
Share on other sites


U guys are a fountain of knowledge and some laughs as well,thx.  for all ur help. I will follow all advice and post my results

WITB:

Taylormade R11 Driver

Taylormade RBZ 3 Wood

Tour Edge Exotics Trilogy #3 Hybrid

Tour Edge Exotics Trilogy #4 Hybrid

Taylormade Tour Preferred CB 5-PW

Cally Jaws X Series Wedges 50,54,58*

Ping I Series Putter 34"

Taylormade Penta Ball and TP Black LDP

Rain Gear and a bunch of other crap

 

Link to comment
Share on other sites


Note: This thread is 4459 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...