Jump to content
IGNORED

Buying Clubs without Testing


Note: This thread is 4402 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

I'm currently in the market to get a 48 and 52 degree wedge and have been trolling the Internet for information on what's available out there. I've been very impressed by SCOR golf's system in particular (everything they seem to say seems to make sense). However there's no way to try these clubs out without actually buying them (yes I know you can return them if you don't like them but then you've got to go back to the drawing board to find something you like). For the vast majority of gofers, buying equipment (and especially short irons/wedges) is about looks, feel and the confidence they generate (yes we like to know there is tech behind the club, but we don't care about all that when we address the ball). How do you feel about buying clubs on-line without the chance to try them out first?

Link to comment
Share on other sites


I bought my current wedges online without trying them out first. Even though there's a Roger Dunn two seconds from where I live, I was flying blind because I'm a lefty and there wasn't much available to demo. I liked the look of the Cleveland CG15/16s and Vokeys and ended up going with the Vokeys. I couldn't be happier with them. Unless you live in a remote area, isn't there a place somewhat nearby where you could go and demo some wedges?

Link to comment
Share on other sites


Thanks for the reply. I can indeed go out and demo a bunch of wedges/clubs (and have personally always bought after trying clubs out). There are however manufacturers out there who almost exclusively distribute their clubs thorugh internet sales (SCOR being one of them). Most of these companies will send you your clubs after you've bought them and if you aren't happy with them you can return them (and get a full refund including the cost of freight)...but nevertheless its a hassel to do this. I was just wondering, why it is that companies would chose to sell this way, given that the traditional (and according to me best) way to buy clubs is to know what you are looking for techinically (lie, loft, lenght, flex, look (blad, MB, Players CB, GI, SGI) and then to go out and try as many clubs that fit that spec before finding the one that suits you best.

Link to comment
Share on other sites


Sorry, I'm not familiar with SCOR, but I get where you're coming from. I went through two each of component drivers and fairway metals and didn't like three of them (the second fairway is currently in my bag). I obviously couldn't return them to my club guy, but luckily, I was able to recoup most of my money by selling them on eBay. It was a hassle and wouldn't have been much better even with a friendly return policy. I would only go that route again as a last resort.

Link to comment
Share on other sites


Thanks again.

here's the link to SCOR's webiste: http://www.scorgolf.com/

As regards these clubs, I'm exteremly tempted to buy them. Everything they say about the clubs seems to make sense to me (short irons are specialised clubs, you should be fit for them, they must all be versatile (playable from all kinds of lies in all conditions) etc...)...just can't seem to pull the trigger, because there's no way to try before I buy!

Link to comment
Share on other sites


I just bought a set of 3 Scratch wedges from an online discount retailer and was very happy with what I got.  I was interested in Scratch based upon all of the good reviews I have read but have never seen their clubs in any of the local retailers.  I know enough about what I wanted that I felt comfortable going through their online fitting system (they grind their wedges to three different specs based upon swing type) and ordering them sight unseen.  I just dropped them off at the local Golf Galaxy to have them add +1 to the shaft and bend them 2 degrees upright which is where I was fitted for the rest of my set.  They have a good deal at Rock Bottom Golf now on the Scratch wedges - $60 a piece for 2010 8620 milled wedges.

I tested them on a couple of rounds last weekend before getting them adjusted and while I need the adjustments I can tell that I am going to be very happy with the clubs.

Link to comment
Share on other sites


Quote:

Thanks for the reply. I can indeed go out and demo a bunch of wedges/clubs (and have personally always bought after trying clubs out). There are however manufacturers out there who almost exclusively distribute their clubs thorugh internet sales (SCOR being one of them). Most of these companies will send you your clubs after you've bought them and if you aren't happy with them you can return them (and get a full refund including the cost of freight)...but nevertheless its a hassel to do this. ...

The smaller, specialty companies (SCOR sticks to wedges) use I.net distribution as their business model. They find it more cost-effective to refund money to unsatisfied customers, rather than try to put their wedges into thousands of golf retail outlets.

And, there's the matter of even getting on the shelf in the mainline shops.

Talked to a Golfsmith players rep yesterday, and he showed me some Adams Watson "Performance Grind" wedges which sell for about $80. WPG has 11 different loft-lie combos, with copper faces, and are well tooled, so it's a real commitment by Adams. The rep said, however, that most golfers "don't notice" them, and would rather spend $110+ for Cleveland or Vokey.

The smaller OEMs can do better on cost control with small batch lots as orders come in, rather than having to send out two dozen wedges each to hundreds of golf shops and hope they sell.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Link to comment
Share on other sites

Awards, Achievements, and Accolades



Originally Posted by WUTiger

Quote:

Originally Posted by buj77

Thanks for the reply. I can indeed go out and demo a bunch of wedges/clubs (and have personally always bought after trying clubs out). There are however manufacturers out there who almost exclusively distribute their clubs thorugh internet sales (SCOR being one of them). Most of these companies will send you your clubs after you've bought them and if you aren't happy with them you can return them (and get a full refund including the cost of freight)...but nevertheless its a hassel to do this. ...

The smaller, specialty companies (SCOR sticks to wedges) use I.net distribution as their business model. They find it more cost-effective to refund money to unsatisfied customers, rather than try to put their wedges into thousands of golf retail outlets.

And, there's the matter of even getting on the shelf in the mainline shops.

Talked to a Golfsmith players rep yesterday, and he showed me some Adams Watson "Performance Grind" wedges which sell for about $80. WPG has 11 different loft-lie combos, with copper faces, and are well tooled, so it's a real commitment by Adams. The rep said, however, that most golfers "don't notice" them, and would rather spend $110+ for Cleveland or Vokey.

The smaller OEMs can do better on cost control with small batch lots as orders come in, rather than having to send out two dozen wedges each to hundreds of golf shops and hope they sell.


Tell me more about these Adams wedges. They sound brilliant (and I'm not just talking about the reflection off polished copper). Headed over to the Adams website right now - thanks!!!

Mizuno MP600 driver, Cleveland '09 Launcher 3-wood, Callaway FTiz 18 degree hybrid, Cleveland TA1 3-9, Scratch SS8620 47, 53, 58, Cleveland Classic 2 mid-mallet, Bridgestone B330S, Sun Mountain four5.

Link to comment
Share on other sites


Global golf does a 30 day return policy on certain clubs. Not sure if they do refunds or store transfers, but if your sure your going to be buying from them, just shop around and try them out.

Matt Dougherty, P.E.
 fasdfa dfdsaf 

What's in My Bag
Driver; :pxg: 0311 Gen 5,  3-Wood: 
:titleist: 917h3 ,  Hybrid:  :titleist: 915 2-Hybrid,  Irons: Sub 70 TAIII Fordged
Wedges: :edel: (52, 56, 60),  Putter: :edel:,  Ball: :snell: MTB,  Shoe: :true_linkswear:,  Rangfinder: :leupold:
Bag: :ping:

Link to comment
Share on other sites

Awards, Achievements, and Accolades

Quote:

Tell me more about these Adams wedges. They sound brilliant (and I'm not just talking about the reflection off polished copper). Headed over to the Adams website right now - thanks!!!

Check out these babies at your own risk... If you try them out, don't blame me if three or four leap into your golf bag.

Seriously, these WPGs are a thing of beauty and a sharp-looking club - they just ooze engineering know-how. You get motivated to go practice your short game just looking at them.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Link to comment
Share on other sites

Awards, Achievements, and Accolades

Thanks, that's very informative and explains a lot. Unfortunately, I caved yesterday and went out and tried a bunch of wedges at the pro shop and ultimately bought an MIzuno MPR 12 wedge (48, 52, 56 with DG Spinners). Absolutely loved the feel and the versatility of the clubs and at $120 a club, pretty good value (comparable in pricing to most others). So it looks like my experiment/thoughts about on-line shopping for clubs without a demo has come to an end for the time being, but I may well give it a try sooner, rather than later. Thanks again for the info/feedback.
Link to comment
Share on other sites


Note: This thread is 4402 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...