Jump to content
Sign in to follow this  
jmanbooyaa

Grafalloy ProLaunch blue

5 posts / 1127 viewsLast Reply

Recommended Posts

I was thinking of putting a Grafalloy ProLaunch Blue 65 into my 17 M1 driver. I currently have a made for Fujikura Pro XLR8 56 shaft. Would the Prolaunch give me a better ball flight? Are these shafts similar? @Adam C

Share this post


Link to post
Share on other sites

27 minutes ago, jmanbooyaa said:

I was thinking of putting a Grafalloy ProLaunch Blue 65 into my 17 M1 driver. I currently have a made for Fujikura Pro XLR8 56 shaft. Would the Prolaunch give me a better ball flight? Are these shafts similar? @Adam C

Not sure what better ball flight means? Are you wanting change in launch height, direction? If I am comparing these two shafts on paper, I would say that they would launch at similar height. The Fuji is 10 grams lighter which could mean more height out of it vs. the Grafalloy though. Grafalloy probably plays a little stiffer also both because of weight and design. Might mean the Grafalloy won't help close the face up as much and could result in losing the ball right. Of course these are all on paper, what a shaft should do and what it does can be complete opposite depending on the hands swinging it.

Share this post


Link to post
Share on other sites

@Adam C thank you for the response. My normal ball flight with the fujikura is mid launch fade. I was seeing if the ProLaunch would increase the height and straighten out the fade a bit.  

I had the stock kuro cage in my m1 but didn’t particularly care for the ball trajectory or feel. 

I have been a bit erratic with my driver and was just curious if a new shaft would do anything. 

 

Edited by jmanbooyaa

Share this post


Link to post
Share on other sites

Both should launch about the same but the weight and the overall stiffness in the Grafalloy should promote lower more right flight if we compare them. Again, this is only theory because how your body reacts to the shaft could cause a different result from what "should" happen.

If you are looking for more height, you are always better off lofting up the head. Loft change is a guarantee of launch change, shaft profile will be small if any.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  



  • Want to join this community?

    We'd love to have you!

    Sign Up
  • Support TST Affiliates

    SuperSpeed
    TourStriker PlaneMate
    Golfer's Journal
    Whoop
    FlightScope Mevo
    Use the code "iacas" for 10% off Mevo
  • Posts

    • My kids - all four of them - shag my foam golf balls when we go for walks.  I take a nine iron and rip shots that they field like outfielders.  Drew, my athlete and most avid golfer, has a running total of 49 catches.  Caitlin has caught about five.  Will tracks them pretty well, but he hasn't caught one yet.  Emma just watches.
    • The Gentlemen My wife really loved this movie, but it was a bit slow compared to other Guy Ritchie films.  The "gang" activity seemed kind of forced.  Scramble for par.
    • I've used the M3 but prefer the R7, I think it's primarily because of the difference in shaft and lie loft angles. Has anyone tried to match the difference of your preferred driver to the latter model based on the fact it should be better. I have the R7 set with all the weights in the fade position and it's 8.5deg, my M3 standard 9.5deg which means if I set it to 8.5deg I open the face? It would also mean that the shaft will play a little differently as I've altered the spine and flo therefore would you say I need to remove and reset the grip and adapter? If you tried this with your new and improved driver head did you find it successful, plz advise so I can decide if it's worth pursuing?
    • The answer is: that's why they make blue ones and red ones.
  • Today's Birthdays

    1. ALong17
      ALong17
      (33 years old)
    2. BrandelChamblee
      BrandelChamblee
      (59 years old)
    3. jjdam
      jjdam
      (57 years old)
    4. leftygibby
      leftygibby
      (56 years old)
    5. RadioCop
      RadioCop
      (56 years old)

×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...