Jump to content
IGNORED

Rusty wedges


Note: This thread is 3888 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

so i have some nike forged black oxide wedges that i think are supposed to rust. before i went on vacation they were black but when i got back they were rusted. I dont mind the rust but now it isnnt rusty on the bottom or where i strike the ball so it looks weird. I tried putting water on them but they really didnt rust at all. Any advice (Wears off after 5 shots)

cant realy see the contrast but it there!

Link to comment
Share on other sites


  • Moderator

Yeah nothing you can do about that, just how those wedges are.  Some tour players have a similar look to their wedges.  Like these, check out the soles

Mike McLoughlin

Check out my friends on Evolvr!
Follow The Sand Trap on Twitter!  and on Facebook
Golf Terminology -  Analyzr  -  My FacebookTwitter and Instagram 

Link to comment
Share on other sites

Awards, Achievements, and Accolades

If you do not like the rust on the wedges or return them to the black oxide finish you can clean the rust away with a brass bristle brush or some light grit sand paper. (1500-2000 grit) to restore the black oxide (also known as bluing) visit brownells.com and search for ortho-blu. It is a DYI bluing salt that you rub on the bare metal and it turns the metal back to black. The more you rub, the deeper the finish. All bluing requires a very very thin coat of oil over the surfaces to prevent it from rusting. Just wipe off before play and your wedges will always stay beautifully black.... this product is very cheap and last forever. I use it routinely on gun parts and have never had an issue. Good luck
  • Upvote 1
Link to comment
Share on other sites


  • Administrator

Rust is "fine" if you like that look on the back of the wedges.

In no way should you have rust on the face (or the sole, but that rubs off naturally) of your wedges. It decreases spin.

Personally, given what rust is and how easily it can spread, I prefer to keep it off my wedges (and all clubs) entirely.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Link to comment
Share on other sites

Awards, Achievements, and Accolades

The rust won't stay on the face or sole of a club for very long. I have the Ping Tour-S "Rustique" wedges and it has a sole just as shiny. I just take some steel wool to the face every so often just in case I mishit it, so that I wouldn't hit the ball on a rusted clubface no matter where on the face the ball was.

Link to comment
Share on other sites

Awards, Achievements, and Accolades

A little surface rust wont hurt a thing, although I never understood why people would actually want a wedge that rusts quickly, unless they somehow believe that rust increases spin (which it doesnt).

Whats in my :sunmountain: C-130 cart bag?

Woods: :mizuno: JPX 850 9.5*, :mizuno: JPX 850 15*, :mizuno: JPX-850 19*, :mizuno: JPX Fli-Hi #4, :mizuno: JPX 800 Pro 5-PW, :mizuno: MP T-4 50-06, 54-09 58-10, :cleveland: Smart Square Blade and :bridgestone: B330-S

Link to comment
Share on other sites


A little surface rust wont hurt a thing, although I never understood why people would actually want a wedge that rusts quickly, unless they somehow believe that rust increases spin (which it doesnt).

My old wedges were the Cleveland 588 rtg that were designed to rust. I got them about 15 years ago when they were all the rage. Iirc they were promoted to decrease glare, not to increase spin. But who am I kidding? I got them because the pros played them and they were "cool."

Link to comment
Share on other sites

Awards, Achievements, and Accolades

Originally Posted by GaijinGolfer

A little surface rust wont hurt a thing, although I never understood why people would actually want a wedge that rusts quickly, unless they somehow believe that rust increases spin (which it doesnt).

I like them because they remind me a little of the old BeCu clubs. That and I have a good excuse for allowing the backs of my clubs to rust, instead of giving them a scrubbing once a month. The last part of my choice was because Ping made the "Rustique" wedges out of a different steel that was softer than the regular Tour-S wedge (8620 vs 17-4) due to lower levels of carbon present in the steel.

Link to comment
Share on other sites

Awards, Achievements, and Accolades

My Nike VR pro wedge rusted up and some on the face. I put it in a glass of coke and that seemed to take off the rust blotches.

  :sunmountain: eco lite stand Bag
:tmade: Sim 2 Max driver
 :callaway: Mavrick 20 * hybrid
:tmade: M2 3HL                               :mizuno: JPX 923 5-gw                           

 Lazrus 52, 56 wedges

:scotty_cameron:
:true_linkswear:-Lux Hybrid, Lux Sport, Original 1.2

:clicgear:

Link to comment
Share on other sites


I'm sure I read on another thread, that some wedges rust intentionally fast, .....to increase surface roughness??? .. To increase spin??? It sounded like a reasonable theory??? I'm not bothered either way, but does anyone actually know for sure if this is true or not???

Gaz Lee

Link to comment
Share on other sites


  • Administrator
Originally Posted by Hardballs

I'm sure I read on another thread, that some wedges rust intentionally fast, .....to increase surface roughness??? .. To increase spin???

It sounded like a reasonable theory???

I'm not bothered either way, but does anyone actually know for sure if this is true or not???

Yes, and we discussed it above, and elsewhere: rust decreases spin, it doesn't increase it.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Link to comment
Share on other sites

Awards, Achievements, and Accolades

No advantage to rust per se , but I like that raw, unplated wedges can be maintained which could become an advantage if you hit a lot of balls, or a lot of sandy soil, and you don't want to replace expensive, or familiar, wedges. For minimal loss of head weight, grooves can be sharpened and faces can be smoothed more easily on a raw wedge. But chromed wedges are more durable in the first place. You pays your money and you takes your choice.

Link to comment
Share on other sites


Originally Posted by birlyshirly

No advantage to rust per se, but I like that raw, unplated wedges can be maintained which could become an advantage if you hit a lot of balls, or a lot of sandy soil, and you don't want to replace expensive, or familiar, wedges. For minimal loss of head weight, grooves can be sharpened and faces can be smoothed more easily on a raw wedge. But chromed wedges are more durable in the first place. You pays your money and you takes your choice.

agreed

Link to comment
Share on other sites


Originally Posted by birlyshirly

No advantage to rust per se, but I like that raw, unplated wedges can be maintained which could become an advantage if you hit a lot of balls, or a lot of sandy soil, and you don't want to replace expensive, or familiar, wedges. For minimal loss of head weight, grooves can be sharpened and faces can be smoothed more easily on a raw wedge. But chromed wedges are more durable in the first place. You pays your money and you takes your choice.


i hit enough balls that i would need to buy new wedges every 2 months but not anymore

Link to comment
Share on other sites


i hit enough balls that i would need to buy new wedges every 2 months but not anymore

Why? Did you used to play with wedges made from clay? I have a pair of Cleveland wedges that I've had for about 15 years and have hit god only knows how many shots with and they work just as good as they've ever worked.

Link to comment
Share on other sites

Awards, Achievements, and Accolades

Plenty players go through a wedge in a season or two. I don't - but that doesn't mean that nobody else does. A lot depends on practice habits and ground conditions, and on what you expect, or will tolerate, from a wedge.

I do believe that vokeys are plated with a very thin layer of kraft cheese - which may be part of the problem.

Link to comment
Share on other sites


Note: This thread is 3888 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • Day 12: Same as last couple days, but focus was on recentering aspect of flow. When I recenter earlier I make decent contact most swings but if I recenter late or not at all it’s a roll of the dice. 
    • A couple of things.  Some of the clubs in your bag should be dropped immediately.  A 2-iron for example with what obviously seems to be a lower swing speed or possibly not great swing yet is a definite no-no.  To be hitting that 120-140 yards, which I assume includes run, is a sign that you are not getting the ball airborne at the correct angle to maximise distance.  The reason your 3 and 5 hybrid are going the same distance is that your launch angle is better with the 5.  Loft is your friend. Ideally I would suggest going to a golf or sporting store where you can hit golf balls on a simulator without being disturbed to understand your club carry distances and hopefully swing speed.  With that information we can definitely guide you better.
    • Let us be clear, unless you have proof of cheating, you just sound like a case of sour grapes.  In our club we have a guy who won club titles for many years.  Yes, he was a low single digit handicapper, but there have been quite a few others who played at his level.  Yet his mental strength and experience helped him win in many years when he shouldn't have.  Did he sandbag.  DEFINITELY NOT.  Did he just minimize his mistakes and pull out shots as and when needed.  Definitely.
    • Day 111 - Worked on my grip and higher hands in the backswing. Full swings with the PRGR. 
    • First off please forgive me if this is not a proper post or not in the proper location, still learning the ropes around here. Second, it's important that I mention I am very new to the game with only about 10 rounds of golf under my belt, most being 9 holes. Only this year have I started playing 18. That being said, I am hooked, love the game and am very eager to learn and improve. To give you an idea of my skill, the last 2 18 rounds I played were 110 and 105. Not great at all, however I am slowly improving as I learn. Had been having bad slicing issues with the driver and hybrids but after playing some more and hitting the range, I've been able to improve on that quite a bit and have been hitting more straight on average. Irons have always come easier to me as far as hitting straight for some reason. Wedges have needed a lot of improvement, but I practice chipping about 20-30 mins about 3-5 times a week and that's helped a lot. Today I went to the range and started to note down some distance data, mind you I am averaging the distances based off my best guess compared to the distance markers on the range. I do not currently own a range finder or tracker. From reading some similar posts I do understand that filling gaps is ideal, but I am having a some issues figuring out those gaps and understanding which clubs to keep and remove as some gaps are minimal between clubs. Below is an image of the chart I put together showing the clubs and average distances I've been hitting and power applied. For some reason I am hitting my hybrids around the same distances and I am not sure why. Wondering if one of them should be removed. I didn't notice a huge loft difference either. The irons I have are hand me downs from my grandfather and after playing with them a bit, I feel like they're just not giving me what could potentially be there. The feel is a bit hard/harsh and underwhelming if that makes sense and I can't seem to get decent distances from them. Wondering if I should be looking to invest in some more updated irons and if those should be muscle backs or cavity backs? My knowledge here is minimal. I have never played with modern fairway woods, only the classic clubs that are actually wood and much smaller than modern clubs. I recently removed the 4 and 5 woods from my bag as I was never using them and I don't hit them very well or very far. Wondering if I should look into some more modern fairway wood options? I appreciate any feedback or advice anyone is willing to give, please forgive my lack of knowledge. I am eager to learn! Thank you.  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...