Jump to content
IGNORED

Hooking Irons


Note: This thread is 3197 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Hi everyone Not sure if this is in the right place but I will ask anyway... I currently play a set of cavity back irons with a moderate amount of offset. I hit a fade with my driver, fairway woods and hybrids, but I hit a rather large hook with my irons could this be due to the offset?? Or would it be more swing related?? Thanks for your help
Link to comment
Share on other sites


No its not the iron. If you have your hands low in the top off the back swing you may not be closing the driver face through the ball. The same position with shorter clubs that close faster can produce the opposite ball flight. Left and right generally can come from but is not limited to a more "around" swing. Practice geting the hands up in the back and finishing high and study the ball flight changes.

Tom R.

TM R1 on a USTv2, TM 3wHL on USTv2, TM Rescue 11 in 17,TM udi #3, Rocketbladez tour kbs reg, Mack Daddy 50.10,54.14,60.14, Cleveland putter

Link to comment
Share on other sites


Do your long clubs and your irons have the same grip thickness? Too thin iron grips might cause too much hand rotation.

Have you had a lie angle check on your irons? If they are too upright, this would contribute to left misses.

Any chance you have a neutral grip for the long clubs, but a strong grip for the irons?

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Link to comment
Share on other sites

Awards, Achievements, and Accolades

Do your long clubs and your irons have the same grip thickness? Too thin iron grips might cause too much hand rotation. Have you had a lie angle check on your irons? If they are too upright, this would contribute to left misses. Any chance you have a neutral grip for the long clubs, but a strong grip for the irons?

No all my clubs have the same thickness of grips just put new ones on this year (standard with 3 wraps of tape) I don't think my grip is different, I have been working hard on it for the last few weeks. And if anything my lies would be flat, all clubs are standard lenght and I'm quite tall.

Link to comment
Share on other sites


  • 11 months later...
I'm the opposite of a pro, or anyone who should be giving any advice for that matter. But where I'm at in my game right now, I find that when I'm slicing the ball my grip is too weak and when I'm hooking it my grip is too strong. The grip change seems to help this problem a bit.
Link to comment
Share on other sites


I tend to be a hooker also, its usually caused by  not leading the shot with your body and letting your hands pass which closes the face, if you are also a little over the top this can cause a pull fade with your woods  and a pull hook with the shorter clubs.

Link to comment
Share on other sites


Note: This thread is 3197 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • Wordle 1,013 3/6* ⬛🟨⬛🟨🟨 🟩⬛🟩🟩⬛ 🟩🟩🟩🟩🟩
    • Meanwhile, another old Tour Edge guy switches to Callaway for this season. I have a different problem, course dependent set-ups. What I’m wondering is if @dragonsmhas the 8 iron set 5-PW, AW, GW or just 5-PW, GW. Because the PW is 42°, AW 47°, and GW 52°. Because that could potentially be a gap there. The 5-iron to 6-iron length jump is 5/8” instead of 1/2” so you should be careful of that.    @WUTiger the problem most people have with 3-woods is they don’t play them far enough back into their stance. And they usually don’t have enough loft and the shaft is too long. So 3HL, 4 or 5-wood is probably better for most golfers. I do the “Frankenwood” approach. I have both the 3+ and 5 woods. I typically will either add two degrees to the 3+ on 6600 yards or longer courses, or take a degree off the 5-wood on shorter courses than 6300 or so, and use the 5-wood shaft for both. I don’t usually find a situation where I need both the 3 and 5 wood on a course. I don’t play from 7000 yards it’s no fun. Edit: I mostly agree with @WUTiger on the gapping, although a lot of the newer even fixed hosel fairway woods are made better than what we had when we were playing the old Exotics XRails.
    • Wordle 1,013 4/6* ⬛🟦🟦⬛⬛ ⬛🟦⬛🟦🟦 🟧⬛🟧🟧🟧 🟧🟧🟧🟧🟧 par is good after a double bogey yesterday.
    • I did read the fine print tonight. It said replace with “similar features & function”.  8 yeas ago my purchase had features that today are available on the lower end models and the current version of my model has more “bells & whistles” than what I got 8 years ago.  So I am thinking they honored the agreement and I can’t argue the offer. since getting a credit for the full purchase price all I am really out over the past 8 years was the cost of the extended warranty, which was less than a low end  treadmill would have cost me. now the question is which model to replace with.  I’ll stay with Nordic Track or I forfeit the $1,463 credit so I will get Nordic Track.  And they honored the warranty and were not hard to work with which is a plus.
    • Generally speaking, extended warranties are a terrible deal and should almost always be avoided. They are a huge profit center for the companies that offer them, which should tell you almost everything you need to know about how much value most consumers get when purchasing them.  This is correct, and the old adage applies - only buy insurance when you can't afford the loss. This usually doesn't apply to most consumer goods.  To your second question, no I don't believe the offer is fair. They are replacing it, but it is not being replaced at "no cost to you". Since the amount being disputed (over $500) is non-trivial, I would probably push the issue. Don't waste your time on the phone with a customer service agent or a supervisor. They have probably given you all they have the authority to do. Rather, I would look at the terms of your agreement and specifically legal disputes. The odds are you probably agreed to binding arbitration in the event of a dispute. The agreement will outline what steps need to be followed, but it will probably look something like this.  1. Mail the Nordic Track legal department outlining your dispute and indicate you are not satisfied with the resolution offered.  2. Open up a case with the AAA (American Arbitration Association), along with the required documentation. 3. Wait about 4-5 weeks for a case to be opened - at which point someone from Nordic Track's legal department will offer to give you the new model at no cost to you.  They certainly don't want to spend the time and energy to fight you over $500. 4. Enjoy your new Nordic Track at no cost to you. I recently entered binding arbitration against a fairly large and well known company that screwed me over and refused to make it right. In my demand letter, I made a pretty sizeable request that included compensation for my time and frustration. Once it hit their legal department, they cut me a check - no questions asked. It was far cheaper to settle with me than to send their legal team to defend them in the arbitration.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...