Jump to content
IGNORED

TST Member Review - Birdicorn Ball Mark Repair Tool


Note: This thread is 1130 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

  • Administrator

Product Name: Birdicorn Divot Tool
Product Type: Ball mark fixer/divot repair tool
Product Website/URL: https://birdicorn.com
Cost: $20

Ratings (out of 5):
Quality: 5
Value: 4
Effectiveness: 5
Durability: 4
Esthetic Appeal: 4
Usefulness: 5


My Member Review

 

I generally carry two things in my front right pocket: a ball marker (often a TST ball marker), and a divot repair tool (often a thin metal one from the USGA or Lake View, or US Kids Golf, actually).

This works fine, except for some occasional light clinking together, and I really appreciate the divot repair tools (ball mark repair tools) that I use: they're thin and do their job well without tearing up the greens:

So to be honest I wasn't necessarily looking to try out the Birdicorn ball mark repair tool. It looked thick, it looked clunky, and I generally don't like "attached" ball markers - to my hat, to my repair tool, etc.

But at least some of those suppositions were wrong, and I now enjoy carrying the all-in-one tool.

The Birdicorn purports to do six or seven things:

  1. Ball mark holder
  2. Ball mark fixer
  3. Bottle opener
  4. Ball line stencil
  5. Club/Cigar rest
  6. Putt alignment aid
  7. Groove cleaner

Let's take a look at each of those, briefly.

Ball Mark Holder
The ball mark held by the Birdicorn is a round, almost quarter-sized ball marker. It's thick enough to provide an edge so you can easily slide it off the magnetized back side of the Birdicorn tool, but not so thick as to be unwieldy. The marker itself is decorated with a different logo on each side - if you can remember which one is which, you can flip it over and use one to remind you that you moved your mark to the side off of someone's line or something. I prefer the smaller bird, rather than the thicker, heavier bird, personally.

birdicorn_split.jpg

The magnets are sufficiently strong that, after being annoyed at having to get out my Birdicorn the first several times to put the marker on it, I eventually just started throwing my marker into the pocket and trusting my walking to affix the marker to the magnets. This works the vast majority of the time.

Ball Mark Fixer
To be honest, if the Birdicorn did a poor job of this, I'd throw it out or give it away to a friend who plays mostly at poor golf courses and who enjoys drinking bottles of beer or something. I use this function of my ball mark repair tool more than anything else, and it's the most important. I can play golf using a tee as my ball marker, for example: I despise playing golf and not feeling I'm taking good care of the course by fixing any ball marks I see (or create).

Fortunately, it does a great job of repairing ball marks. As you can see in the image below, the tines are very thin. From the topic linked above, the best repair tools are thin and have the right amount of separation between the tines. Their job is to push some soil around, not to rip up the ground or create large holes.

birdicorn_side.jpg

The ball mark repair functions of the Birdicorn are great. The tool slides into even firm turf smoothly, and the tines are sturdy enough not to bend or twist in the ground. They push the soil around without excessive tearing, and properly used, leave virtually no sign of their use after a repair.

The one thing my preferred tools might do a slightly better job of is coring out an old improperly repaired ball mark - the more angled, slightly smaller tines of my USGA ball mark repair tool do a better job of that. Once cored I will push the sides of the grass in to repair the ball mark.

Bottle Opener
Incomplete. Honestly I don't remember the last time I had to open a bottle. Actually, I take that back - it was at the NCAA National Championships in May. I used the side of a metal fence instead. I'm not big on opening bottles (most things I drink on the golf course have a screw top or a flip top… like a water bottle).

Ball Line Stencil
I lined a ball just to say I used the feature, but I don't regularly put lines on my golf balls. The impression, the "dimple" in the Birdicorn is pretty shallow. It has to be or the Birdicorn itself would be so much thicker. But this thinness means it is only truly against the side of a ball for five dimples or so, with the edges starting to pull away from the ball. My line came out "okay" but if you're the type that loves to draw lines on your golf ball, particularly if you like LONG lines on your golf ball, the Birdicorn should be sufficient in a pinch, but the half-ball plastic tools or Tin Cup type products are still likely your best bet.

birdicorn_bottom.jpg

Club/Cigar Rest
This is one of the things the Birdicorn does best. I love my USGA tool and all, but at the same time, it generally stinks for this. It's just too narrow, and if you're not super gentle putting the club down with the tool oriented just so… your club can slide off and your grips can get wet regardless.

The Birdicorn is wide enough to reasonably well support and catch and hold the grip even at the thicker end, and the tines are not angled like most repair tools, so it seems less likely to tip over under the weight of a club in softer soils. Even the bottle opener "nub" helps to stabilize the Birdicorn from tipping over sideways.

I don't often set my clubs on my ball marker (because I don't often play when it's quite that wet out), but the dewsweepers and avid players will appreciate the functionality here.

Putt Alignment Aid
Let's just say this one's a stretch. To do this they want you to put the rounded part of the top of the Birdicorn against your ball on the putting green as your ball marker, and then use the line stencil as an alignment aid to help you line up your putt. It's like the lines on the Scotty Cameron tool/marker, like the lines on my TST ball markers, etc. But it has the other "stuff" attached to it, and lacks the slightly diagonal lines to match.

Groove Cleaner
The tines are thin and strong enough to clean most grooves, and do so pretty well. To be honest I almost never have caked in dirt; I scrub my grooves with a brush and wipe them with a towel after nearly every shot. I had to borrow a friend's wedge to test this out, but it sufficiently got out even pretty old dirt from the grooves, and did so without scratching or otherwise marring the club, or altering the groove depth or width or shape, like the groove sharpening tools can do.

Overall

Look, let's not overthink this. It's a ball mark repair tool with a magnet attached to hold a ball marker. It does its primary jobs (plural) really well, and likely opens bottles too. If you don't routinely lose your ball mark repair tools, the Birdicorn comes highly recommended. If you're looking for some great tee gifts for your next event, the Birdicorn would make a great gift. It comes in a bunch of colors, with different paint colors on the ball marker, so you can be sure to choose a ball marker and repair tool color combo to suit your needs.

birdicorn_separate.jpg

  • Thanks 1
Link to post
Share on other sites
Awards, Achievements, and Accolades

  • Moderator
3 hours ago, iacas said:

Product Name: Birdicorn Divot Tool
Product Type: Ball mark fixer/divot repair tool
Product Website/URL: https://birdicorn.com
Cost: $20

Ratings (out of 5):
Quality: 5
Value: 4
Effectiveness: 5
Durability: 4
Esthetic Appeal: 4
Usefulness: 5


My Member Review

 

I generally carry two things in my front right pocket: a ball marker (often a TST ball marker), and a divot repair tool (often a thin metal one from the USGA or Lake View, or US Kids Golf, actually).

This works fine, except for some occasional light clinking together, and I really appreciate the divot repair tools (ball mark repair tools) that I use: they're thin and do their job well without tearing up the greens:

So to be honest I wasn't necessarily looking to try out the Birdicorn ball mark repair tool. It looked thick, it looked clunky, and I generally don't like "attached" ball markers - to my hat, to my repair tool, etc.

But at least some of those suppositions were wrong, and I now enjoy carrying the all-in-one tool.

The Birdicorn purports to do six or seven things:

  1. Ball mark holder
  2. Ball mark fixer
  3. Bottle opener
  4. Ball line stencil
  5. Club/Cigar rest
  6. Putt alignment aid
  7. Groove cleaner

Let's take a look at each of those, briefly.

Ball Mark Holder
The ball mark held by the Birdicorn is a round, almost quarter-sized ball marker. It's thick enough to provide an edge so you can easily slide it off the magnetized back side of the Birdicorn tool, but not so thick as to be unwieldy. The marker itself is decorated with a different logo on each side - if you can remember which one is which, you can flip it over and use one to remind you that you moved your mark to the side off of someone's line or something. I prefer the smaller bird, rather than the thicker, heavier bird, personally.

birdicorn_split.jpg

The magnets are sufficiently strong that, after being annoyed at having to get out my Birdicorn the first several times to put the marker on it, I eventually just started throwing my marker into the pocket and trusting my walking to affix the marker to the magnets. This works the vast majority of the time.

Ball Mark Fixer
To be honest, if the Birdicorn did a poor job of this, I'd throw it out or give it away to a friend who plays mostly at poor golf courses and who enjoys drinking bottles of beer or something. I use this function of my ball mark repair tool more than anything else, and it's the most important. I can play golf using a tee as my ball marker, for example: I despise playing golf and not feeling I'm taking good care of the course by fixing any ball marks I see (or create).

Fortunately, it does a great job of repairing ball marks. As you can see in the image below, the tines are very thin. From the topic linked above, the best repair tools are thin and have the right amount of separation between the tines. Their job is to push some soil around, not to rip up the ground or create large holes.

birdicorn_side.jpg

The ball mark repair functions of the Birdicorn are great. The tool slides into even firm turf smoothly, and the tines are sturdy enough not to bend or twist in the ground. They push the soil around without excessive tearing, and properly used, leave virtually no sign of their use after a repair.

The one thing my preferred tools might do a slightly better job of is coring out an old improperly repaired ball mark - the more angled, slightly smaller tines of my USGA ball mark repair tool do a better job of that. Once cored I will push the sides of the grass in to repair the ball mark.

Bottle Opener
Incomplete. Honestly I don't remember the last time I had to open a bottle. Actually, I take that back - it was at the NCAA National Championships in May. I used the side of a metal fence instead. I'm not big on opening bottles (most things I drink on the golf course have a screw top or a flip top… like a water bottle).

Ball Line Stencil
I lined a ball just to say I used the feature, but I don't regularly put lines on my golf balls. The impression, the "dimple" in the Birdicorn is pretty shallow. It has to be or the Birdicorn itself would be so much thicker. But this thinness means it is only truly against the side of a ball for five dimples or so, with the edges starting to pull away from the ball. My line came out "okay" but if you're the type that loves to draw lines on your golf ball, particularly if you like LONG lines on your golf ball, the Birdicorn should be sufficient in a pinch, but the half-ball plastic tools or Tin Cup type products are still likely your best bet.

birdicorn_bottom.jpg

Club/Cigar Rest
This is one of the things the Birdicorn does best. I love my USGA tool and all, but at the same time, it generally stinks for this. It's just too narrow, and if you're not super gentle putting the club down with the tool oriented just so… your club can slide off and your grips can get wet regardless.

The Birdicorn is wide enough to reasonably well support and catch and hold the grip even at the thicker end, and the tines are not angled like most repair tools, so it seems less likely to tip over under the weight of a club in softer soils. Even the bottle opener "nub" helps to stabilize the Birdicorn from tipping over sideways.

I don't often set my clubs on my ball marker (because I don't often play when it's quite that wet out), but the dewsweepers and avid players will appreciate the functionality here.

Putt Alignment Aid
Let's just say this one's a stretch. To do this they want you to put the rounded part of the top of the Birdicorn against your ball on the putting green as your ball marker, and then use the line stencil as an alignment aid to help you line up your putt. It's like the lines on the Scotty Cameron tool/marker, like the lines on my TST ball markers, etc. But it has the other "stuff" attached to it, and lacks the slightly diagonal lines to match.

Groove Cleaner
The tines are thin and strong enough to clean most grooves, and do so pretty well. To be honest I almost never have caked in dirt; I scrub my grooves with a brush and wipe them with a towel after nearly every shot. I had to borrow a friend's wedge to test this out, but it sufficiently got out even pretty old dirt from the grooves, and did so without scratching or otherwise marring the club, or altering the groove depth or width or shape, like the groove sharpening tools can do.

Overall

Look, let's not overthink this. It's a ball mark repair tool with a magnet attached to hold a ball marker. It does its primary jobs (plural) really well, and likely opens bottles too. If you don't routinely lose your ball mark repair tools, the Birdicorn comes highly recommended. If you're looking for some great tee gifts for your next event, the Birdicorn would make a great gift. It comes in a bunch of colors, with different paint colors on the ball marker, so you can be sure to choose a ball marker and repair tool color combo to suit your needs.

birdicorn_separate.jpg

Thanks for the review. Are the tines sharp enough to poke a hole in your pocket? I ask this because I have had ones do this.

Link to post
Share on other sites
Awards, Achievements, and Accolades

  • Administrator
4 hours ago, boogielicious said:

Thanks for the review. Are the tines sharp enough to poke a hole in your pocket? I ask this because I have had ones do this.

No. Not at all.

I also forgot to attach this picture.

birdicorn_fixing.jpg

Link to post
Share on other sites
Awards, Achievements, and Accolades

Note: This thread is 1130 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Want to join this community?

    We'd love to have you!

    Sign Up
  • Support TST Affiliates

    TourStriker PlaneMate
    Golfer's Journal
    Whoop
    SuperSpeed
    FlightScope Mevo
    Use the code "iacas" for 10% off Mevo and the code "iacasjun21" for 10% off SuperSpeed.
  • Posts

    • 1) I am 100% for vaccine, so tone down the barking a bit here. I am trying to push as many people, POLITELY, to get the vaccine. Because, when has barking at the, or calling people idiots ever gotten them to do what you want them to do.  2) How much more does the vaccine help someone who has had COVID resist getting COVD? If he tests positive, should he get the vaccine if he has sufficient antibodies to resist it from getting COVID? Should we demonize him for it if he is sufficiently protected because he had it.  How many are those who previously had COVID? Just asking questions to get information not to combat you on getting the vaccine or not.  Don't take my questioning as denouncing getting the vaccine. I am not an expert, and any more information is good for me to pass along. I 100% agree with taking the vaccine if possible. Which is a very high % of people out there. 
    • Reading through these reviews one thing stands out.  You guys are lovers of the game, you guys are observant of the nuances of a golf course and you guys can write.  Kudos.  I think that defines your basic TST'er. I have friends that fulfill the first two items, but they can't and/or hate to write.  Too much like high school.  So they'll never come on here.  They are famous for texting only "Ok" to a longish, heartfelt text I might send their way.
    • "probably" should have? When is wife had it? "If" the vaccine "further helps him out"? The guy is clearly anti vaccine. A fool. Pardon me, but it sounds as if you are not 100% on board with the vaccine. You even said that he basically should decide whether he should get the vaccine only if he had tested positive! Why can't these people understand that you get the vaccine to save others, not just yourself. Symptoms or no symptoms. You get the vaccine. Unless you are a selfish dick who doesn't give a sh*t about anyone else. UNLESS your doctor specifically tells you NOT to take it, lest risking your own life. Am I missing something?  The vaccine has "helped" many, many millions of people out by making sure they don't die. And don't pass it on.
    • Nope, because I have no idea if he did or did not isolate himself from public.  Let's say his wife gets COVID, he's taking care of her, and self isolates through the entire process plus a few weeks after she gets better. I rather not be snarky and nasty to a coworker when I do not know what he exactly did. All I know is, he did not get the vaccine because he was around his wife through the entirety of her bout with COVID.  Also, he was working from home, so no issue with social distancing with coworkers. We were not allowed to go into the office unless it was for specific reasons, and you had to report when you showed up, when you left, and who you ended up being around. You were required to wear masks when you were not at your desk. Again, rather not say nasty snarky comments here. You obviously do not know our work situation.  Yes, he probably should have gotten tested. Yes, if the vaccine further helps him out, then he should have gotten the vaccine when available. 
    • Day 110 (7/25/21) - Putting practice today on the PuttOut mat. Did the PuttOut challenge then worked on making putts straight down the lines on either side of the mat.
  • Today's Birthdays

    1. Armando Araujo
      Armando Araujo
      (46 years old)
    2. chris3putt
      chris3putt
      (54 years old)
    3. CrazyHorsePete
      CrazyHorsePete
      (34 years old)
    4. DHak20
      DHak20
      (44 years old)

×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...