Rayy

I starting to have this same problem with my hips and I'm starting to slice my ball. Something I normaly dont do it. It is getting me stress

Well I care more for control and acurassy than more yardage. I already hit it long like 270 or 280 thats enought for me! So if I trimmed from the but it wont get stiffer? or just make it a little more stiffer? As long as it doesn't get like x-stiff or something ¬¬ Im fine!

so it will get stiffer if I cut the shaft to 45? I think I will try it on 46 inch Im tall guy anyways Im 6'0" so 46 should be fine for me!

hahaha that look great! I have to try those grips I need to find someone who play with them ¬¬! I have check golfsmith, edwin watts and golf galaxy, and they only have the v2 proforse 335" tip size and not the 350" So I found this website www.golfworks.com who do carry the 350" version how are they? are they trustable? Also I see that they dont let you chose what lenght you want on your shaft. All websites say 46". My actual driver is 45" long, and I want the same lenght, so I just cut the shaft to 45" or what do I do? I think I will have to ask my friend who reshaft clubs ¬¬

Probably the same my r7 425 already have xD the golfpride tour velvet ¬¬ Im thinking on the multicompound but I have never try them I will have to try them first! But I'm already acostume to this golfpride tour velvet, probably I will use that!

Thanks dude! What about edwin Watts or golf galaxy? how are the service from this websites?

It is the standar R7 425 and I already check on the taylormade website and figure it out that the tip size is 350" :P whats that shaft depot I never hear of that place? :O

Does anyone know whats the tip size for R7 425? I think it is 350" What website I can fin this shaft at a good price?

so I was fitted for this shaft and I'm going to reshaft my R7 425 with this! How have been this shaft for you guys out there who has it on your driver?? I just want to hear your personal opinion about it! Also I want to know whats the tip size of my 425? I'm buying the shaft over internet, and a good friend of mine who reshaft clubs it is going to reshaft my driver for free Also what website will you recommend me to buy this shaft? I have seen then on the golfsmith website, but they don't have it on stock

thanks! :)

Hello I want to know if I can bent a club just half degree up? For example a 6 iron which is 61.5° to 62° of lie angle!

Hello all I'm from Venezuela, and I got a little problem of a set I'm trying to buy. I don't have that much money to buy a new set of iron, so I'm looking for a used set. I want to get the mizuno mp 32 that I have try them, and I like them a lot, and it is easy to find then used and cheep. I got fit from a pro on the golf course I play here in my country and he told me that I should get a 1/4 inch longer and 2 degree upright for this mizunos mp32. The problem is that I have been hard for me to find a used set of mp 32 with a 1/4 inch longer. I have only find standard! Does 1/4 inch longer going to make a much difference on my shot that standard? I can buy them standard and bent them two degree upright. Will that fit properly for me? or the 1/4 inch longer it's really going to make a differences? Please help me on this one!

I have never hit an 18 degree hybrid. I can hit my 5 wood prety far. I hit it like 240 plus roll. Well a hybrid I usally hit it like 5 or 10 yards less thatn a wood in the same loft.

I love my 5 wood I hit this thing like 240 250 yards and feel so good! I also like 3 wood I hit it betwen the 260 and 270 but only from the tees. I dont use it on the fairway.

I have the eye 2 and for me they are the best club ping have ever made. I love them and I will keep them after I buy my new set of blade.

I can hit my 60* wedge from anything inside 100 yards. Well is the only wedge I have for the moment so I have to use it from almost any where inside the 100 yards.

I dont have a 3 iron cause I have this 7 wood wich I hit it prety well. The distance I hit with my 3 iron and my 7 wood is partialy the same so I dont need the 3 iron for now. I also dont have hibrids because I like a lot hiting woods and I have never get acostume to the look of the hibrids

I have a question to? for example is 38 inches is the standar for 5 iron. This is from the top of the grip to the botton of the toe of the club? or from the top of the grip to the end of the shaft?

Nice the first mizuno review Im going to see here. This interes me a lot because im geting 2 new wedges, and Im betwen the mizunos and the Vokeys. I will like to see more reviews of mizuno products especially their irons.

Whose mizuno tour player use PXF?

Wow thanks Iacas that explination is better that the one who give me the mizuno rep I talk about. He just told me mizuno doesn't build their clubs with PX Flighted, and it was the same when I talk to the operator on mizuno. If thats the reason im going with the Project X instead.

I think you can do it with a mizuno's rep or an authorise mizuno store. Im really not sure.

Well I talk to a mizuno rep the other day telling him that I want mizuno irons with project x flighted and he told me that mizuno doesn't use the flighted version of project x, so I call mizuno and they told they dont make their irons with this shaft. In order to have one you need to get only the heads and go to a Authorise Royal Presicion Store to shaft your heads with the PX flighted.

Hey when you get this iron can you make a nice review. Im still deciding betwen the mp67, mp32 and the TM Rac mb. Im also thinking making a mix betwen mp60 for 3-5 irons and mp67 or 32 for 7-PW. I check your page and I see you dont have any review for mizuno irons. Why is that?

I have my scoty cameron studio style 1.5 and I love this put more than any other club in my bag.