Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6350 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
There are many holes at my home course that have sand bunkers that are about 30-60-yrds away from the green. When I'm lucky enoughto get in them, I have trouble reaching the green from these distances, usually play a 56w , any advice on how to play the shot or what clubs to use?
In the bag
driver- G5
3wood-
5wood-
irons- cpr 4-pw[B]wedges[/B]- 52,56,60 cg12putter-odyssey:

Posted
For shots up to 40'ish yards of carry I use a PW or 9i with the face opened up maybe a bit more than normal for a SW explosion shot. Then just hit a normal explosion taking a bit less sand than normal.

Longer than that and (for me) that technique is less effective.

dave

In The Bag:
- Wishon 949MC 10.5* Driver
- Wishon 525 F/D 3W
- Wishon 515 949MC 5W
- Wishon 60* Cx Micro LW- Wishon 550M SW (55*)- Wishon 550M GW bent to 50* - Wishon 550C 6i - 9i (9i bent to 45*)- Wishon 321Li 3i/4i/5i hybrids- Odyssey Two Ball Putter


Posted
PW atleast for sure. Depending on the conditions of the sand. If you are comfortable picking a GW out of the bunker you could try that, but I normally go to my PW or 9i in a 50-60 yd bunker shot in a loose bunker.

MacGregor MACTEC NVG2 8.5* Driver
MacGregor UT2 NVG2
Taylormade VSteel 3W
Cobra IH300 3-PW
Nike SV 56* SWNike SV 50* GWOdyssey 2ball PutterTitleist Pro V1x


Posted
This is one of, if not the most difficult shot in golf. Even with hours of practice, I'd consider myself mediocre at this shot.

My technique for a 30-50 yard explosion:
With a good lie, you can use a standard sand wedge, the worse the lie gets, the more club you want to take.

Open the stance slightly, and hit about an inch behind the ball. Precision is everything here.

SWING HARD. I know it sounds a little ridiculous, but that's my technique. I don't go balls out, but I take a pretty good whack at the sucker.

Lastly, and probably most importantly, FOLLOW THROUGH. If you cut off your follow through, you're going to be lucky enough to have the same shot again.

Anything above 50 yards, and I'll hit a full 60 taking very, very little sand.

Driver: Nike VRS Covert 

3 Wood: Taylormade Rocketballz

Hybrid: Nike Sumo 18*

Irons: Titleist AP1 4-PW

Wedges: Cleveland CG12 60* 56* & 52* 

Putter: Scotty Cameron Studio Style Newport 1.5


Note: This thread is 6350 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 34 (14 Dec 25) - Got outside for a few moments to work on bump and runs with the 4h (again using the exaggerated weight shift reminder of the left (lead) heel). Finding that it helps keep the downswing arc extended.  
    • Wordle 1,639 4/6 🟩⬜⬜⬜⬜ 🟩⬜🟨🟨⬜ 🟩⬜🟩🟩⬜ 🟩🟩🟩🟩🟩
    • You can try it with some lead tape first to see if it works for you.
    • Wordle 1,639 5/6 🟨⬜⬜⬜⬜ 🟨⬜🟩🟨⬜ 🟩🟨🟩⬜⬜ 🟩⬜🟩🟩🟩 🟩🟩🟩🟩🟩
    • I am currently playing a Cobra Ltdx LS 9 degree driver and Cobra Ltdx LS FW3. Both with Tensei White stock stiff shafts and original weights of 12g (heel) and 3g (toe). My miss is usually a pull fade or sometimes a slice, swing is out to in. Driver swing speed about 112 mph. Grips are stock regular. Intended change: Driver: Switching to Tensei White x-flex one inch shorter which I suppose would be 44,5? Changing heel weight to 18g. Changing grip to Golf Pride Z-grip cord midsize. Change hosel setting to standard draw. FW3: Changing heel weight to 16g (apparently not available in FW weights, but supposed to be something called "internal weight" a club builder can add which fits between the weight and the screw?). Change grip to Golf Pride Z-grip cord midsize. Changing hosel setting to standard +1. The goal is to 1) get better grip since I tend so lose grip in warm and moist conditions with the current grips and 2) mitigate the misses to start more straight with less side spin. Also considering adding the Cobra Ltdx LS FW5 instead of my old Taylormade R9 and getting 14g heel and 6g toe weights with the same grip as the others and hosel setting standard +1.   All of the above is based on conversations with ChatGPT and, as everyone knows, it can come up with pretty much whatever but I spent a few hours asking about different perspectives etc and this was the recommendation. So, my question is basically, does it make any sense?   Thanks.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.