Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6410 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I just ordered a set of irons from this company earlier today. I got them with firm steel shaft, mid grip, custom sized. I was wondering if anyone has ever had any experience with this company's equipment? I know the clubs they make are knock offs of brand name stuff, but from feedback left, they seem like solid clubs. The ones I got are designed from the Nike Slingshot irons and I should have them within 3 weeks.
I am also a goaltender and on a goalie forum, and i know some members there despise a certain company because they take other company's designs, and put their own name on it, and sell for less. I know people here may look down on that, but that's what fits my budget right now. I really just want to know how they are going to perform and hold up. Thanks, Greg.

Here is a link to the set of clubs I ordered. http://cgi.ebay.ca/CUSTOM-LEFT-HANDE...QQcmdZViewItem

Driver: 905R w V2 stiff 76
FW: NVG2 Fujikura stiff
Hybrids: Idea Pro 20* Aldila VS Proto
Irons: M685 3-PW Rifle 5.5
Wedges: 54* VIP forged, 58* CG10Putter: Bettinardi A02Ball: ProV1, Black Max


Posted
nobody's tried anything from them? They've seemed to sell an awful lot of stuff on ebay.

Driver: 905R w V2 stiff 76
FW: NVG2 Fujikura stiff
Hybrids: Idea Pro 20* Aldila VS Proto
Irons: M685 3-PW Rifle 5.5
Wedges: 54* VIP forged, 58* CG10Putter: Bettinardi A02Ball: ProV1, Black Max


Posted
as an 11 handicap you should stay away from knock offs... look into a used set of legit clubs, I think its a much better decision

look on edwinwatts.com in their pre owned section, or callaway has a pretty impressive selection and of course there is always ebay

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


Posted
i'm an 11 handicap with walmart wilson clubs i bought a few years ago for $170......how much worse off could i be? Did you take a look at the link i posted?

Driver: 905R w V2 stiff 76
FW: NVG2 Fujikura stiff
Hybrids: Idea Pro 20* Aldila VS Proto
Irons: M685 3-PW Rifle 5.5
Wedges: 54* VIP forged, 58* CG10Putter: Bettinardi A02Ball: ProV1, Black Max


Posted
They look decent but I wonder about a fitting done over the internet (lie angle, correct shaft flex, lenght, etc). Also, the reason why the real Nike's cost so much is because of the R&D; that went into them as well as the materials used to construct them as oppose to the knockoffs. I would check their return policy as I would be leary about ordering clubs I never hit (or was fitted for in person). Let us know how it goes . . .

Alan Olson

Follow The Sand Trap on Twitter!
Check out our Facebook page!

Awards, Achievements, and Accolades

Posted
I am very weary about knock offs.... I could throw a ball farther than they hit

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


Posted
the sizing was done over the phone. I just ordered them like that opposed to on ebay. They have a lifetime warranty for normal wear/breakages. They were supposed to be done today and shipped out. I'll definetely let you know how they turn out.

Driver: 905R w V2 stiff 76
FW: NVG2 Fujikura stiff
Hybrids: Idea Pro 20* Aldila VS Proto
Irons: M685 3-PW Rifle 5.5
Wedges: 54* VIP forged, 58* CG10Putter: Bettinardi A02Ball: ProV1, Black Max


  • 1 year later...
Posted
I'm curious as to how these turned out. I was actually browsing their ebay store earlier today and some of the clubs look pretty convincing.

Posted
wow.....i started this a long time ago. The irons served their purpose pretty well. The finish on the back of the clubs wore off pretty quick. They were very forgiving, hard to chunk, which was helpful for my game at the time. I have since went through those, a set of Tommy Armour silverscot cb's, and am currently bagging MacGregor M685's. I have went from a 12 handicap to currently around a 4 and improving. I'm actually going for my CPGA card in August.

All in all, for the money, they are decent. But since I have been able to find sets like the M685's i have now for 200 bucks, in my opinion, better deals can be found on higher quality used goods.

Driver: 905R w V2 stiff 76
FW: NVG2 Fujikura stiff
Hybrids: Idea Pro 20* Aldila VS Proto
Irons: M685 3-PW Rifle 5.5
Wedges: 54* VIP forged, 58* CG10Putter: Bettinardi A02Ball: ProV1, Black Max


Note: This thread is 6410 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.