Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5798 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
just wondering if someone else races rc cars buggys of trucks
DriverMonster Hi-Bore XLS/w Mintsubishi Diamana Fit-On M Gold Stiff 55g
Woods906F4 3 Wood/w Aldila VS Proto Fairway Stiff 80g
Hybrid3dx red 20 and 23 degree
Irons3dx red 5-pw
Wedgesharmonized sand wedge 56 degree loft and harmonize lob wedge 60 degree loftPutterWhite Hot XG SabertoothBallNoddle or ...

Posted
It's been a while but I used to race 1/8th scale buggies for Mugen. Been almost 10 years though but had a blast when I did it. Even travelled a bit with the mugen team to races in south Carolina and vegas.

I couldn't imagine paying for rc cars and golf haha. Both are extremely expensive hobbies


Sent from my iPhone using Tapatalk

Posted
Expensive!! You're not kidding. I ran 1/10th scale mod. oval, 4 cell oval, and 1/4 scale gas oval for about 5yrs back in the late 90's, and I can tell you for a fact, that it is much cheaper to run a regular car at the local track each week than RC's. I ran a sportsman car on half of the budget I had for running rc's. I did travel a bit with the rc racing, but cost was rediculous.
As with ay other racing you just have to keep spending to keep up, and just spend a little more to go a little faster. Golf is by far much cheaper.
All that said, it was a blast. The guys I traveled with were some of the greatest people you could ever meet. You always had a good time at the races as well when you went out to party a little afterwards.
Like anything, It's ok in moderation!!

Have fun and Live Life!!

Updated 2/7/10 - In my Revolver Pro bag:
Driver: G-10 10.5* TFC 129 Stiff flex 3-W: G-10 TFC129 Stiff flex
#2h(17*) Stiff Flex #3(21*) & #4(24*): Hybrid G-10 TFC129 Stiff flex
5-PW: MP32 (DG300)S flex Wedges 52-8, 56-14, and 60-04 Bobby Jones Wedges
Putter: Rossa Monte Carlo 35"Grips:...


  • 3 weeks later...
Posted
Expensive!! You're not kidding. I ran 1/10th scale mod. oval, 4 cell oval, and 1/4 scale gas oval for about 5yrs back in the late 90's, and I can tell you for a fact, that it is much cheaper to run a regular car at the local track each week than RC's. I ran a sportsman car on half of the budget I had for running rc's. I did travel a bit with the rc racing, but cost was rediculous.

Totally agree....my brother in law has five buggies and truggies, since he has owned and raced them for roughly the same amount of money we raced a front wheel drive car and a top level go kart.

If you always do what you've always done....You'll always be where you are right now..
Driver: C830.2 HOF Taiwan Proto
3 wood: Versus VS 1 Proforce V2
7 wood: DCT Fujikura Motore F1
3-pw: Nakashima NX-1 Project X 6.5 53*: ...

Posted
Expensive!! You're not kidding. I ran 1/10th scale mod. oval, 4 cell oval, and 1/4 scale gas oval for about 5yrs back in the late 90's, and I can tell you for a fact, that it is much cheaper to run a regular car at the local track each week than RC's. I ran a sportsman car on half of the budget I had for running rc's. I did travel a bit with the rc racing, but cost was rediculous.

My golf fees are 250 dollars a year and i mainly used grade a recycled balls

DriverMonster Hi-Bore XLS/w Mintsubishi Diamana Fit-On M Gold Stiff 55g
Woods906F4 3 Wood/w Aldila VS Proto Fairway Stiff 80g
Hybrid3dx red 20 and 23 degree
Irons3dx red 5-pw
Wedgesharmonized sand wedge 56 degree loft and harmonize lob wedge 60 degree loftPutterWhite Hot XG SabertoothBallNoddle or ...

Posted
Yup, I've had RC cars since I was 12. Ya, that was 1983. I had the Grasshopper then Frog and then a Hotshot, which I still have and I also had one of the first gold tub AE 1/10 scale buggies. I always had one, but started racing 10 years ago. I finally quit 4 years ago because it was getting to expensive to compete every weekend and keep up with all my hobbies.
I still have two Revo to's bash around, an AE 1/10 GT2 (when they still raced 1/10scale) and a Crawler. But the money sunk into these damn things is amazing!!
Golf is cheaper!!

Posted
Just out of curiosity I checked the price of a new AE RC10 chassis, ouch they were $359.00 on sale.
I will just keep playing golf. Those were good times though.

Updated 2/7/10 - In my Revolver Pro bag:
Driver: G-10 10.5* TFC 129 Stiff flex 3-W: G-10 TFC129 Stiff flex
#2h(17*) Stiff Flex #3(21*) & #4(24*): Hybrid G-10 TFC129 Stiff flex
5-PW: MP32 (DG300)S flex Wedges 52-8, 56-14, and 60-04 Bobby Jones Wedges
Putter: Rossa Monte Carlo 35"Grips:...


Posted
Yup, I've had RC cars since I was 12. Ya, that was 1983. I had the Grasshopper then Frog and then a Hotshot, which I still have and I also had one of the first gold tub AE 1/10 scale buggies. I always had one, but started racing 10 years ago. I finally quit 4 years ago because it was getting to expensive to compete every weekend and keep up with all my hobbies.

WOW!!!! The Grasshopper and The Frog.... those were my brother and myselfs first cars.....we thought were something with those... after those we went to the gold tub RC10 and then the Losi JrX2 for a while then we got into carpet cars...I still have a couple nitro buggys around here and a Losi XXtcr

If you always do what you've always done....You'll always be where you are right now..
Driver: C830.2 HOF Taiwan Proto
3 wood: Versus VS 1 Proforce V2
7 wood: DCT Fujikura Motore F1
3-pw: Nakashima NX-1 Project X 6.5 53*: ...

  • 1 month later...
Posted
I have a couple of RC10s that are at least 20 years old.

Irons: MP 57 with Project X Rifle 6.0 shafts
Driver: Big Bertha 460 (9 degree loft) with UST ProForce 66g V2X Graphite Shaft
Wedges: Spin Milled Black Nickel 56.14, Spin Milled Black Nickel 60.07, Spin Milled Black Nickel 52.08 (next purchase)
Putter: White Hot XG #6
Ball: TP Red


Posted
I run on road cars in the winter (12th scale and World GT). I used to run buggy and truggy in the summer but it got too expensive. It is far less to run on road pan cars and they are silly fast.

Posted
Me too, used to run offroad electric and gas, then got into electric sedans/pan cars. Next ran nitro 1/10 sedans and 1/8th scale. Managed to place in the top 40 at the Nats in sedan and top 20 at the Nats in 1/8th scale 6 or 7 years ago. Had sponsors, etc., but got married and had some children, so just didn't have the time to put into it any more. Golf is time consuming as well, but not nearly as bad as RC Racing was, especially when you have sponsors and need to keep up with the competition. I have to say sometimes, golf may be even more challenging! Currently trying to get rid of all my old cars (memories....), of course to use the funds for more golf crap! LOL!

'09 R9
'09 R9 3 wood 15*
Tour Edge Exotics XCG3 3-4 hybrids
'10 AP1 710 5-GW
Vokey SM 54*/11 Vokey SM 58*/4 Barbados putter C-130


  • 2 weeks later...
Posted
I use to have several, but transitioned over to RC Planes. I started with a RC10 and a Kyosho (I think) in Camp Casey, Korea in 1994. I did recently see a Traxxis Slash 4X4 that I would really love to get. Have any experience with that one?

  • 2 weeks later...
Posted
Just out of curiosity I checked the price of a new AE RC10 chassis, ouch they were $359.00 on sale.

YOU AIN'T KIDDIN', r.c. stuff has gotten out of control! A bunch of us who race full size cars in the summer used to run the Dirt Runners indoor series in north Jersey in the winter.

Some of the guys, like my son went for a bunch of classes, some were sick fast. They ran one class ( modified turing 4 wheel drive ) 2 rules- had to have a 1/10 scale turing car body and a 6 cell limit. He started out with a Losi XXX-S , an 8 turn motor, 6 sets of batteries with a.h. numbers 3000 points higher than most people knew existed ( and cell matched to 3 decimal places ). We ran on a flat carpet oval about 2/3 the size of a basket ball 1/2 court and twice he ran 100+ laps in a 4 minute race! The club stopped running the class for safety reasons and because the guys running in the class were tired of dropping 4 tires, a set of motor brushes, ball diff with rings and a spur gear in the trash every time the car was run. Not to mention cutting the commutator after each run (3 cuts and the armature is junk). After 6 charging cycles the batteries began to " fall off " so he sold them and built new. I on the other hand, stayed with 2 " spec " classes until the club made both classes "brushless" Now I have to buy brushless motors, they need a brushless type speed control. The new batteries I need to make all this new stuff fast can't be charged on my chargers. SCREW THIS - I think I'm going to work on my I.M.C.A. modified this winter! WAIT A MINUTE! I just remembered, I have a box of chain saw engines I got at an auction. I have a 2 acre back yard! I can weld up a bunch of 1/3 scale modifieds and sprint cars! Invite the guys over! My wife will kill me.

Note: This thread is 5798 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Still working on the backswing a bit. Hand still gets away from the body, out towards the ball, and at A2 the club wants to roll over and get flat at A3. It's just very difficult to shallow from that position like I want. Which makes my downswing work impossible.  Backswing I have been playing around with the left leg straightening to start the backswing. It's like, a slight shove of the hips right with the left leg. Then just keep the flex in the right knee as I turn into it. I kind of like it. I never had a good swing trigger. It helps keep my left knee extended.  Yea, definitely feeling the hand path is traveling down the feet line, and straight up. A little bit of wrist rotation, and a lot more hinge sooner in the right wrist and elbow. I am trying to get the feeling that the arm hinging up then is the cause for the right shoulder to retract to finish the backswing. Club feels much more vertical at A3. I am trying to have my wrist fully hinged by then.  Feel the club and arms stop at A3.5 (my A4). If my arm collapses late, then I turn into that and I am pretty much screwed. The club and arms kind of have a floaty feeling, where they are just suspended in air for a bit, then drop.  Downswing I have been trying to think of a good visual for this mentally. I like the idea of my hands taking a wide arc to my right pocket, or I am taking the back of the hosel and trying to hit the ground behind my right foot.    Left knee stuff, just sooner. 
    • Day 78 - 2026-03-10 Backswing work at the net with foam balls, a few real ball swings.
    • Day 525 - 2026-03-10 Got some work in before lessons today (was going to play after but it decided to POUR). Then like three minutes in later on.
    • Day 2 (10 Mar 26) - Worked on weight shift feel using slap stick drill (hands about 6” apart - coming back weight on trail foot - down - thru weight on lead foot….moved it to hitting chips w/9i playing what I call “leap frog” - hit 1st about 10yds, the next a couple past the 1st, for about 6 balls total.  Love it as the lies change, the distances vary making each swing slightly different. 
    • The first post is here:   Do you have an overly long backswing that ruins sequencing and leads to poor shots? In nearly 20 years of teaching, I've found 5 common faults. You don't have to swing like Jon Rahm, but a shorter swing will probably help you #PlayBetter golf. Which is your fatal flaw? #1 - Trail Elbow Bend Average golfers ♥️ bending their trail elbows. It can feel powerful! Tour players bend their trail elbows MUCH less. A wider trail elbow creates a longer hand path and preserves structure. It also forces more chest turn; not everything longer is bad! Overly bending your trail elbow can wreak havoc on your swing. It pulls your arms across/beside your body. It requires more time to get the elbow bend "out," ruining your sequencing. The lead arm often bends and low point control is destroyed. The misconception is that it will create more speed, but that's often the opposite of what happens. Golfers often feel they swing "easier" but FASTER with wider trail elbows. Want to play better golf with a shorter backswing? Don't bend your elbow so much. #2 - Hip (Pelvis) Turn I see this all the time: a golfer's hips are only 5-10° open at impact, but he turns them back 60°+ in the backswing. Unless your father is The Flash, your hips are probably not getting 40° open at impact from there! That's more rotation than Rory! Golfers who over-rotate their pelvis often over-turn everything - trail thigh/knee, chest/shoulders, etc. They have more work to do in the same ~0.3 seconds as a Tour player who turns back ~40° and turns through to impact 40° or so. Want to shorten the pelvis turn a bit? Learn to internally rotate into the trail hip, externally rotate away from the lead hip, and do "less" with your knees (extending and flexing) in the backswing. Learn some separation between chest and pelvis. #3 - Rolled Inside and Lifted Up Amateurs love to send the club (and their arms) around them. You see the red golfer here all the time at your local range. The problem? Your arms mostly take the club UP, not around. Going around creates no height until you have to hoist the club up in the air because you're halfway through your backswing and the club is waist high and three feet behind your butt! 😄  Learn to use your arms properly. Arms = up/down, body = around. Most golfers learn how little their arms really have to do in the backswing. The picture here is all you've gotta do (but maybe with a properly sized club!). #4 - Wide Takeaway Width is good, no? Yes, if you're wide at the right time and in the right spots. Golfers seeking width often don't hinge the club much early in the backswing… forcing them to hinge it late. Hinging the club late puts a lot of momentum into the club, wrists, and elbow just before we need to make a hairpin turn in transition and go the other direction at the start of the downswing. When you're driving into a hairpin curve, you go into it slowly and accelerate out of it. Waiting to hinge is like coasting down the straightaway and accelerating into the hairpin. Your car ends up off the road, and your golf ball off the course. Give hinging at a faster rate (earlier) then coasting to the top a try. You'll be able to accelerate out of the hairpin without the momentum of the arms and club pulling in the wrong direction.   #5 - Sway and Tilt Some sway is good but sometimes I see a golfer who just… keeps… swaying… Their chest leans forward a bit for balance, resulting in a whole lotta lean. The green line below is the GEARS "virtual spine." Pros sway a bit, but stay ~90°. This sway often combines with the extra pelvis turn because this golfer is not putting ANY limits on what the "middle of them" (their pelvis) is doing in the backswing. These golfers spend a lot of energy just to get back to neutral! The best players begin pushing forward EARLY in the backswing. Often before the club gets much past their trail foot! Pushing forward (softly) first stops your backward sway and then begins to get your body moving toward the target. Push softly, but early!  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.