Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4584 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Hi all.

I use some old Titleist 822 OS irons and the SW/PW lofts are:

SW - 55.5

PW - 46

I've got to that point in my game, where I need a Wedge to fill in between my SW/PW. As you can see, there's quite a substanial gap between them both and I've had a few shots recently that really a GW would be perfect, instead of overhitting a SW or grip-down PW.

My dilemma is whether to buy a single GW or buy a set of wedges. As the irons are quite old now, there's not any GW listed in the UK for these irons, but I'm concerned that buying a seperate brand GW may mess up the feel of my short game.

If it were you, would you invest in a set of wedges, so you don't have to adjust the feel/weight for each wedge or would you just buy a different branded GW?


Posted

from your own description you are merely trying to fill a gap, hence "gap wedge". I really do not see how a different "brand" is going to effect how you hit the rest of your clubs other than mentally. If it did, then buying a whole set would give you not one, but three wedges you were not comfortable with. I would go with the "one".

"James"

:titleist: 913 D3 with Aldila RIP Phenom 60 4,2 Regular Shaft,  :touredge: Exotics XCG-7 Beta 3W with Matrix Red Tie Shaft:touredge: Exotics EX8 19 deg Hybrid w UST Mamiya Recoil F3 Shaft:touredge: Exotics EX9 28 deg Hybrid w UST Mamiya Recoil F3  shaft, / Bobby Jones Black 22 deg Hybrid:touredge: Exotics EXi 6 -PW  w UST Mamiya Recoil F2 Shaft, SW (56),GW (52),LW (60):touredge:  TGS),/ ODDYSEE Metal-X #7 customized putter (400G, cut down Mid Belly)

Awards, Achievements, and Accolades

Posted
You can still find the 822 gap wedge on the Internet. I have seen it on a couple of sites. Just google it and a few should show up.

Posted

I would go with one right now until your game stabilizes. Look for a 50* or a 52*. After you work with it and compare yardages to the three wedges, you might bend it to 51* to balance out distances.

If you're starting to play more and thinking about uprgrades, you should probably get fitted for irons first, and then blend in wedges that fit the distances.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha B16 OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:  image.png.0d90925b4c768ce7c125b16f98313e0d.png Inertial NM SL-583F, 34"  
Ball:  :srixon: QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted

If your handicap is a 24 I agree with the post above me to go find a 50 or 52, until you can score a bit better then you can go advance and buy a set of wedges.  I would suggest vokey desgined wedges.  Also pick up a 60 degree. Ever since I got mine the tough short shots in the rough right next to the flag have been a breeze!


Posted
Thanks for the replies people. I've looked around for the GW of that set but no luck, only PW (in the uk). Handicaps actually at 19 now and have been shooting a few 14-16 rounds, but I agree still not low enough to warrant a set. I do own a 60degree vokey as per the post above, which is why I've started to relise the gap I've got. Time to look around, may go with another vokey 50-52.

Note: This thread is 4584 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 80 - 2026-03-12 30 minutes at the range playing some simulated holes, picking targets, etc. 15 minutes of putting work.
    • I was on Golf Digest's Golf IQ podcast with Sam Weinman talking about being a "golf dad." https://www.golfdigest.com/story/5-golf-dads-advice I followed: Ian Poulter Mike Thomas Johnson Wagner Kevin Van Valkenburg Apparently the series was only five parts long, as they wrote up a summary article on it.   Golf Dad Part 5: Erik Barzeski on how to switch between father and instructor Podcast Episode · Golf IQ · March 2 · 35m Golf Dad Part 5: Erik Barzeski on how to switch between father and instructor — Golf IQ Erik Barzeski, Director of Instruction at Golf Evolution, is the father of a golf pro and an author, but also has the perspective of someone who works with juniors. The ability to switch between wearing those different...
    • They sure do. 158 with an 8 iron is on the high end for me
    • Went back to controlling my knees. That part was getting a bit sloppy when I worked on my backswing. Right hip didn't slide or gain internal rotation. I would just rotate back and around and the left knee would be in a bad spot. Really focusing now on keeping my left knee very stable and straighter in the backswing. I can't go back to the old pattern of overturning the hips. I was returning to my old pattern to time my downswing. Turn forever.  Left knee controls both knees and hips, acting as an anchor. Feel like it straightens a bit.   Hinge sooner and faster. Not in a way that sends the hands out and flips the club over. I still noticed when the hands get to A2.5, the hands would want to flip over and flatten the club out a ton.  Still trying to figure out how to roll the forearms a bit open and not just roll the club inside a ton.  Figure out the timing to get the hands down. Still getting a bit of right elbow collapsing in the downswing because the arms are too high when I turn. Everything is happening sooner now. If the hips are controlled, the backswing is shortened. Because it is shortened I don't know when to get the hands down and I just turn because the downswing is a go.  Very slow (50%) swings are decent.  
    • Distances look fine, no?
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.