Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6705 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Hello everyone, I have a quick question regarding a possible reshafting of my irons. I'm currently playing a set of mx-23's that my dad gave me and they have the stock graphite shafts. I wanted to reshaft with steel but i also wanted to change the lie of the clubs 2 degree's upright. Is this actually possible as I'm assuming you'd have to change the angle of the hosel? How much do you think it would cost? and is it worth it to just sell and buy a custom spec set of 25's? Thanks for your help!

In my bag:
X 460
hawkeye VFT 3 & 5 woods
MX-23 3-pw
MP-T 54*, 58*Newport TeI3/anser


Posted
that won't be a problem at all... luckily you were given a set of mizuno's which are forged, cast irons can be bent but many can only be bent a single time and some have a very tough time being bent at all.

your forged irons can be bent as many times as you want. I'm not sure on the cost of the procedure but with a reshaft and lie adjustment its definately a lot less than a new set of mx 25's... my brother just got a set of 25's, they are very very nice clubs but very steep in price as well.

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


Posted
Most shops will charge between $5-8 to change the lie angle per club and re-shaft for around the same price, so around $10-$16 per club, with a discount on a complete set.

I've seen shops do this for around $70-100 for a 3-PW set.

Hi-Bore W/ Aldila NVS-65 (Stiff)
R5 Type N (TpConv), W/ Graphite Design YS-6+ (Stiff)
TA-5 Gumetal 5-PW, W/ Stock TA-5 Graphite shafts (Stiff)
588 Becu SW, LW, GW W/ True Temper S300 shafts
21* & 24* Viper Hybrids W/ UST proforce 65 shafts (Reg) R7 Ti 3 Wood W/ Re-Ax 60 Graphite (Stiff) Pal2...


Posted
true... but remember its 16 a club for labor alone

tack another 10 a club for a dynamic gold

26 a club, thats around 208 bucks

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


Posted
Thanks for the help everyone. Just to update, i've called around to get some estimates and most places are quoting me close to 40 per club. Instead of paying 320 to get a set adjusted, i'd rather sell my set for a little over 300 and pay for a set of 25's fitted for free. Also, fitter at my local range said that manufacturers make two different iron heads, one for graphite and one for steel. is that true?

In my bag:
X 460
hawkeye VFT 3 & 5 woods
MX-23 3-pw
MP-T 54*, 58*Newport TeI3/anser


Note: This thread is 6705 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Never practiced golf when I was young and the only lesson ever taken was a driver lesson. I feel like I'm improving every year. However, the numbers don't support my feeling about improving. I usually drop to 12-13 during the summer while playing the familiar courses around home and then go on golf trips in the fall to new courses and increase to end the year between 15-17. Been a similar story for a number of years now but hey, it's the best thing there is in life so not too bothered but reaching 9.9 is the objective every year. Maybe a few lessons and practice could help me achieve it since I pretty much have no idea what I'm doing, just playing and never practice.
    • I am semi-loyal. Usually buy four dozen of one ball and only play that until out and then determine whether to continue or try another one. Since starting my semi-loyal path to success, I've been playing the below, not in order: ProV1 ProV1x ProV1x left dash AVX Bridgestone BXS Srixon Z-star XV I am not sure if it has helped anything, but it gives a bit of confidence knowing that it at least is not the ball (while using the same one) that gives different results so one thing less to mind about I guess. On the level that I am, not sure whether it makes much difference but will continue since I have to play something so might as well go with the same ball for a number of rounds. Edit: favorite is probably the BXS followed by ProV1/Srixon Z-star XV. Haven't got any numbers to back it up but just by feel.  
    • Will not do it by myself, going to the pro shop I usually use after Cristmas for input and actually doing the changes, if any, but wanted to get some thoughts on whether this was worthwhile out of curiosity. 
    • In terms of ball striking, not really. Ball striking being how good you are at hitting the center of the clubface with the swing path you want and the loft you want to present at impact.  In terms of getting better launch conditions for the current swing you have, it is debatable.  It depends on how you swing and what your current launch conditions are at. These are fine tuning mechanisms not significant changes. They might not even be the correct fine tuning you need. I would go spend the $100 to $150 dollars in getting a club fitting over potentially wasting money on changes that ChatGPT gave you.  New grips are important. Yes, it can affect swing weight, but it is personal preference. Swing weight is just one component.  Overall weight effects the feel. The type of golf shaft effects the feel of the club in the swing. Swing weight effects the feel. You can add so much extra weight to get the swing weight correct and it will feel completely different because the total weight went up. Imagine swinging a 5lb stick versus a 15lb stick. They could be balanced the same (swing weight), but one will take substantially more effort to move.  I would almost say swing weight is an old school way of fitting clubs. Now, with launch monitors, you could just fit the golfer. You could have two golfers with the same swing speed that want completely different swing weight. It is just personal preference. You can only tell that by swinging a golf club.     
    • Thanks for the comments. I fully understand that these changes won't make any big difference compared to getting a flawless swing but looking to give myself the best chance of success at where I am and hopefully lessons will improve the swing along the way. Can these changes make minor improvements to ball striking and misses then that's fine. From what I understood about changing the grips, which is to avoid them slipping in warm and humid conditions, is that it will affect the swing weight since midsize are heavier than regular and so therefore adding weight to the club head would be required to avoid a change of feel in the club compared to before? 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.