Jump to content
Check out the Spin Axis Podcast! ×
Check out the Spin Axis Podcast!
IGNORED

epoxy for shaft

jstgilstrap

By jstgilstrap
in Clubs, Grips, Shafts, Fitting

 Share
Note: This thread is 4560 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

jstgilstrap Member

jstgilstrap

Posted
Posted

Im going to try and fix one of my clubs and when I go to put the shaft back in the club I know im going to need epoxy. But do I have to use the epoxy from the golf store thats for the shaft or can I use a 5min or 30min epoxy from a hobby store. I have a ton of that stuff and was just wondering if its the same.

Thanks.


joekelly Great Member

joekelly

Posted
Posted

i used some 5 minute epoxy on a big driver head and new shaft. no problem after 2 years. the only thing i have seen in the golf fitter shops that may sometimes be useful are the tiny glass  beads but only if the shaft is a bit loose. IMO, any epoxy will work.


Gripit Member

Gripit

Posted
Posted
I always use a two part epoxy I get from golf suppliers. You don't have to, you can use any good epoxy. Just make sure it has a very high shear strength. Those fast epoxies are sometimes not as strong as the ones that take longer to cure, either, so be careful using something you got for cheap at a hobby shop.

Approaching "70"....age, not score...

Ping G5 10.5 driver and 3w, TFC 100 R

Maltby H3, H4, H5, Maltby Pro Series R

Pinhawk SL 6i-Aw, Maltby Pro Series R

Maltby TSW 54 & 58, Maltby Pro Series S (tip trimmed to 8i length for the "spinner shaft" effect...experiment that seems to be one of my better decisions!)

Maltby Pure-Track PTM-1, 33" with +2* loft added


Note: This thread is 4560 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Want to join this community?

    We'd love to have you!

    Sign Up

  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).

  • Posts

    • iacas
      Erik J. Barzeski on the Golf IQ Podcast (Golf Digest) Series on Golf Dads

      By iacas · Posted

      I was on Golf Digest's Golf IQ podcast with Sam Weinman talking about being a "golf dad." https://www.golfdigest.com/story/5-golf-dads-advice I followed: Ian Poulter Mike Thomas Johnson Wagner Kevin Van Valkenburg Apparently the series was only five parts long, as they wrote up a summary article on it.   Golf Dad Part 5: Erik Barzeski on how to switch between father and instructor Podcast Episode · Golf IQ · March 2 · 35m Golf Dad Part 5: Erik Barzeski on how to switch between father and instructor — Golf IQ Erik Barzeski, Director of Instruction at Golf Evolution, is the father of a golf pro and an author, but also has the perspective of someone who works with juniors. The ability to switch between wearing those different...
    • Ty_Webb
      My Swing (Ty_Webb)

      By Ty_Webb · Posted

      They sure do. 158 with an 8 iron is on the high end for me
    • saevel25
      My Swing (saevel25)

      By saevel25 · Posted

      Went back to controlling my knees. That part was getting a bit sloppy when I worked on my backswing. Right hip didn't slide or gain internal rotation. I would just rotate back and around and the left knee would be in a bad spot. Really focusing now on keeping my left knee very stable and straighter in the backswing. I can't go back to the old pattern of overturning the hips. I was returning to my old pattern to time my downswing. Turn forever.  Left knee controls both knees and hips, acting as an anchor. Feel like it straightens a bit.   Hinge sooner and faster. Not in a way that sends the hands out and flips the club over. I still noticed when the hands get to A2.5, the hands would want to flip over and flatten the club out a ton.  Still trying to figure out how to roll the forearms a bit open and not just roll the club inside a ton.  Figure out the timing to get the hands down. Still getting a bit of right elbow collapsing in the downswing because the arms are too high when I turn. Everything is happening sooner now. If the hips are controlled, the backswing is shortened. Because it is shortened I don't know when to get the hands down and I just turn because the downswing is a go.  Very slow (50%) swings are decent.  
    • iacas
      My Swing (Ty_Webb)

      By iacas · Posted

      Distances look fine, no?
    • 5amZ
      "5 Minutes Daily" Practice Challenge

      By 5amZ · Posted

      Day 207-12 Wider backswing and arm reconnecting in downswing. Did a much better job with proper wrist movements through downswing today.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept