Jump to content
Check out the Spin Axis Podcast! ×
Check out the Spin Axis Podcast!
IGNORED

Driver/Shaft Combo

Free Ballin

By Free Ballin
in Clubs, Grips, Shafts, Fitting

 Share
Note: This thread is 6495 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Free Ballin Member

Free Ballin

Posted
Posted
I recently purchased a Maltby CT250 8° head, and I am trying to decide what shaft to put in this. I currently play a 9.5° TM Superquad with a VS Proto Stiff. My ball flight with my current set up is a mid to high draw. I bought this head to get my flight down, but I don't want it low. So I was thinking of getting a mid to high launching shaft.

Am I way off with my thinking? I know it is hard to suggest shafts, heads, etc. with out seeing my swing and LM stats. I do know my average swing speed is 104 mph.

any help would be greatly appreciated.

My Sticks:
DriverFT-5 9.5° Tour Accuflex Creation 65g Stiff -or-
:R7 Superquad Redboard Stiff
Woods::TEE CB2 Accuflex Creation 80g stiff
Irons:755 cb 4-SWWedges: CG10 Black Pearl 52,56,60Putter::Seemore Black FGP 34.25"


warbirdlover Well Established Member

warbirdlover

Posted
Posted

I have a similar swing speed but use a higher lofted head. I still like the NVS stiff shaft that I stupidly got rid of (and the Rapture it was in) and currently am liking the BB Soltuions 130 stiff shaft. I'm getting a SK Fiber stiff flex for my BUL (see sig) since they are cheap and supposed to be excellent. I like a softer tip shaft. Lot's of choices out there.

WBL

What's In the Bag
Callaway FTiq Tour i-mix 9.5º with stiff Mitsubishi Rayon Javlnfx 6
Cobra F-Speed LD 3-wood 15.5º with 43" YS Tour AD regCobra Baffler DWS 20º & 23º with Aldila VS Proto HL regPing S59 3-PW with Nippon PRO 950GH stiffTitleist Vokey Spin Milled 56º wedgeInazone B...


Free Ballin Member

Free Ballin

Posted
  • Author
Posted
what was your ball flight with the NVS compared to the BB solutions? What are the flight characteristics of the BB solutions? low/mid/high?

My Sticks:
DriverFT-5 9.5° Tour Accuflex Creation 65g Stiff -or-
:R7 Superquad Redboard Stiff
Woods::TEE CB2 Accuflex Creation 80g stiff
Irons:755 cb 4-SWWedges: CG10 Black Pearl 52,56,60Putter::Seemore Black FGP 34.25"


allin Great Member

allin

Posted
Posted
I recently purchased a Maltby CT250 8° head, and I am trying to decide what shaft to put in this. I currently play a 9.5° TM Superquad with a VS Proto Stiff. My ball flight with my current set up is a mid to high draw. I bought this head to get my flight down, but I don't want it low. So I was thinking of getting a mid to high launching shaft.

Quote since you bought a maltby head why don't you take a look at the shafts offered in their catalogue. They are rated by kick point, torque, tip stiffness and player category.

1W Cleveland LauncherComp 10.5, 3W Touredge Exotics 15 deg.,FY Wilson 19.5 degree
4 and 5H, 6I-GW Callaway Razr, SW, LW Cleveland Cg-14, Putter Taylor Made Suzuka, Ball, Srixon XV Yellow


  • 2 weeks later...
warbirdlover Well Established Member

warbirdlover

Posted
Posted
My ball flight with the NVS was mid-high. With the BB Solutions (rated as mid-launch) silmilar but not "quite" as high. More penetrating and rolls out nice.

WBL

What's In the Bag
Callaway FTiq Tour i-mix 9.5º with stiff Mitsubishi Rayon Javlnfx 6
Cobra F-Speed LD 3-wood 15.5º with 43" YS Tour AD regCobra Baffler DWS 20º & 23º with Aldila VS Proto HL regPing S59 3-PW with Nippon PRO 950GH stiffTitleist Vokey Spin Milled 56º wedgeInazone B...


Note: This thread is 6495 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Want to join this community?

    We'd love to have you!

    Sign Up

  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).

  • Posts

    • WillieT
      "5 Minutes Daily" Practice Challenge

      By WillieT · Posted

      Day 34 (14 Dec 25) - Got outside for a few moments to work on bump and runs with the 4h (again using the exaggerated weight shift reminder of the left (lead) heel). Finding that it helps keep the downswing arc extended.  
    • DeadMan
      Wordle Daily Puzzle

      By DeadMan · Posted

      Wordle 1,639 4/6 🟩⬜⬜⬜⬜ 🟩⬜🟨🟨⬜ 🟩⬜🟩🟩⬜ 🟩🟩🟩🟩🟩
    • boogielicious
      Driver and Fw3 Swing Weight Changes, Make Sense?

      By boogielicious · Posted

      You can try it with some lead tape first to see if it works for you.
    • boogielicious
      Wordle Daily Puzzle

      By boogielicious · Posted

      Wordle 1,639 5/6 🟨⬜⬜⬜⬜ 🟨⬜🟩🟨⬜ 🟩🟨🟩⬜⬜ 🟩⬜🟩🟩🟩 🟩🟩🟩🟩🟩
    • BananaBomber
      Driver and Fw3 Swing Weight Changes, Make Sense?

      By BananaBomber · Posted

      I am currently playing a Cobra Ltdx LS 9 degree driver and Cobra Ltdx LS FW3. Both with Tensei White stock stiff shafts and original weights of 12g (heel) and 3g (toe). My miss is usually a pull fade or sometimes a slice, swing is out to in. Driver swing speed about 112 mph. Grips are stock regular. Intended change: Driver: Switching to Tensei White x-flex one inch shorter which I suppose would be 44,5? Changing heel weight to 18g. Changing grip to Golf Pride Z-grip cord midsize. Change hosel setting to standard draw. FW3: Changing heel weight to 16g (apparently not available in FW weights, but supposed to be something called "internal weight" a club builder can add which fits between the weight and the screw?). Change grip to Golf Pride Z-grip cord midsize. Changing hosel setting to standard +1. The goal is to 1) get better grip since I tend so lose grip in warm and moist conditions with the current grips and 2) mitigate the misses to start more straight with less side spin. Also considering adding the Cobra Ltdx LS FW5 instead of my old Taylormade R9 and getting 14g heel and 6g toe weights with the same grip as the others and hosel setting standard +1.   All of the above is based on conversations with ChatGPT and, as everyone knows, it can come up with pretty much whatever but I spent a few hours asking about different perspectives etc and this was the recommendation. So, my question is basically, does it make any sense?   Thanks.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept