Jump to content
Check out the Spin Axis Podcast! ×
Check out the Spin Axis Podcast!
IGNORED

Scotty Cameron Studio Stainless custom paintfill

Teedub7

By Teedub7
in Clubs, Grips, Shafts, Fitting

 Share
Note: This thread is 6358 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Teedub7 Well Established Member

Teedub7

Posted
Posted
Ive been reading all these posts about changing the paintfill on clubs, and im very interested in doing this to my putter. Problem is, im worried about ruining the finish and was wondering how difficult it is to do with a putter. Has anyone done this with their Cameron????

Will Acetone ruin the finish?

Will i be able to send the custom paintfilled putter to Scotty Cameron for refinishing?

909D3 9.5° w/ Matrix Ozik Xcon 7 Lime Green│ Exotics cb2 15 Aldila DVS S-85│ Slingshot 17° UST Irod S-110g│ G10 21° TFC S-129g │ i10 S300 Green Dot 4-PW │ Vokey Spin Milled Black Nickel 56° and 60° │ Made for the Tour AOP Newport PP

Age 16

Home CoursesRoyal Hawk...


st0wgolf08 Dedicated Member

st0wgolf08

Posted
Posted
I dont get why people are so weird about scotty camerons and special paint and stuff. And why people pay like 5 grand for a putter because it has special colors the 300 dollar ones don't. They scotty cameron people that do that seem more like collectors than players to me. I don't have a problem with them, I just think it's weird they care more how it looks than how it plays

dragonflyin Well Established Member

dragonflyin

Posted
Posted
I dont get why people are so weird about scotty camerons and special paint and stuff. And why people pay like 5 grand for a putter because it has special colors the 300 dollar ones don't. They scotty cameron people that do that seem more like collectors than players to me. I don't have a problem with them, I just think it's weird they care more how it looks than how it plays

I almost have to disagree, custom paint-fills NOT done by the Cameron Shop will dramatically decrease the value of the putter. But yes, there is a cultish culture around SC putters that goes beyond its practical application on the greens.

Driver:  R11S 10.5°, Fairway Woods:  909 F2 15.5°, Hybrid:  G10 21°

Irons:  Tour Preferred MC 4-P, Wedges:  Vokey SM 52.08, 56.10, 60.04

Putter:  Tei3 Newport II / Circa 62 #3, Ball:  Pro V1X / NXT Tour


obsessedgolfer Dedicated Member

obsessedgolfer

Posted
Posted
I almost have to disagree, custom paint-fills NOT done by the Cameron Shop will dramatically decrease the value of the putter. But yes, there is a cultish culture around SC putters that goes beyond its practical application on the greens.

Not if you get the paint fill put on by someone who knows what they are doing, like Slieghter Golf.

Burner 10.5* driver
Burner 3 wood GD Pershing Shaft
Burner 5 wood GD Pershing Shaft
Tour Burner irons
Rac black 52* Rac satin 60* Red x 3 pro v1


Teedub7 Well Established Member

Teedub7

Posted
  • Author
Posted
ok, to refocus the meaning of the post.

If i do this myself can i ruin the finish with the acetone?

Any experience doing this?

Any info is appreciated, i do not want to send it to the custom shop.

909D3 9.5° w/ Matrix Ozik Xcon 7 Lime Green│ Exotics cb2 15 Aldila DVS S-85│ Slingshot 17° UST Irod S-110g│ G10 21° TFC S-129g │ i10 S300 Green Dot 4-PW │ Vokey Spin Milled Black Nickel 56° and 60° │ Made for the Tour AOP Newport PP

Age 16

Home CoursesRoyal Hawk...


DDBowdoin Great Member

DDBowdoin

Posted
Posted
nope you'll be fine... I do it all the time

link to one of my flatsticks

http://www.flickr.com/photos/2308735...29825/sizes/l/

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


deronsizemore Great Member

deronsizemore

Posted
Posted
ok, to refocus the meaning of the post.

I personally don't know the answers you seek, but if I can throw my .02 in here, I would do it myself. By the fact that you're asking these questions obviously means that you don't have much experience with paints and metals and how they work with each other (I don't either), so I wouldn't go doing something like that on a Cameron unless I was completely sure of the results.

Good luck.

--

http://www.deronsizemore.com


DDBowdoin Great Member

DDBowdoin

Posted
Posted
no... trust me, do it yourself! It's not worth sending your putter in for a paintfill alone

It literally takes no time!

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


Teedub7 Well Established Member

Teedub7

Posted
  • Author
Posted
alright thanks, im going to test it on a dummy putter (a nike ignite 001) and see how it goes. ill post pics when im done.

909D3 9.5° w/ Matrix Ozik Xcon 7 Lime Green│ Exotics cb2 15 Aldila DVS S-85│ Slingshot 17° UST Irod S-110g│ G10 21° TFC S-129g │ i10 S300 Green Dot 4-PW │ Vokey Spin Milled Black Nickel 56° and 60° │ Made for the Tour AOP Newport PP

Age 16

Home CoursesRoyal Hawk...


DDBowdoin Great Member

DDBowdoin

Posted
Posted
I have some tips if you want them...

1.) clean and dry putter
2.) heat with a heat gun (quickest), hair dryer takes longer
3.) acetone over the original paint
4.) pick out with a small file or a toothpick
5.) paint area with testors enamel paint (model paint, 5 bucks at toys r us)
6.) dry area lightly with heat gun
7.) using a cotton swap soaked in acetone lighly rub away from the surface

make sure you use a simple fragrant free acetone (nail polish remover)

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


deronsizemore Great Member

deronsizemore

Posted
Posted
I have some tips if you want them...

Actually sounds easy. I'd still be afraid to try it myself I think.

So, in step 2, is that just too ensure the putter is completely dry or does that aid in removing the original paint? In step 5, what do you use to paint the area? Toothpick?

--

http://www.deronsizemore.com


DDBowdoin Great Member

DDBowdoin

Posted
Posted
Actually sounds easy. I'd still be afraid to try it myself I think.

no, actually the heat loosens up the paint somewhat

step 5, you can use a brush in terms of the putter being "stainless" steel it can rust, but certainly not from acetone

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


907golfer12 Great Member

907golfer12

Posted
Posted
I have some tips if you want them...

Could you use this process to do paintfill on irons as well?

Sorry TeeDub for hijacking, I will bow out after the answer comes.

Here's what I play:

Titleist 907 D2 10.5* UST ProForce V2 76-S | Titleist 906F4 18.5* Aldila VS Proto "By You" 80-S | Titleist 585H 21* Aldila VS Proto "By You" 80-S | Titleist ZB 4-PW TTDG S300 | Bob Vokey Spin Milled Oil Can 54.10 | Bob Vokey Spin Milled Oil Can 60.08 | Scotty Cameron Red X5 33" |


DDBowdoin Great Member

DDBowdoin

Posted
Posted
certainly... make sure you use enamel paint though, acrylic doesnt work as well

its pretty cheap, testors model paint works well

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


Teedub7 Well Established Member

Teedub7

Posted
  • Author
Posted
no problem, any answer u get just helps me

909D3 9.5° w/ Matrix Ozik Xcon 7 Lime Green│ Exotics cb2 15 Aldila DVS S-85│ Slingshot 17° UST Irod S-110g│ G10 21° TFC S-129g │ i10 S300 Green Dot 4-PW │ Vokey Spin Milled Black Nickel 56° and 60° │ Made for the Tour AOP Newport PP

Age 16

Home CoursesRoyal Hawk...


907golfer12 Great Member

907golfer12

Posted
Posted
certainly... make sure you use enamel paint though, acrylic doesnt work as well

Okay thanks.

Here's what I play:

Titleist 907 D2 10.5* UST ProForce V2 76-S | Titleist 906F4 18.5* Aldila VS Proto "By You" 80-S | Titleist 585H 21* Aldila VS Proto "By You" 80-S | Titleist ZB 4-PW TTDG S300 | Bob Vokey Spin Milled Oil Can 54.10 | Bob Vokey Spin Milled Oil Can 60.08 | Scotty Cameron Red X5 33" |


DDBowdoin Great Member

DDBowdoin

Posted
Posted
just here to help you boys... share the pics

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


Note: This thread is 6358 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Want to join this community?

    We'd love to have you!

    Sign Up

  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).

  • Posts

    • iacas
      Erik J. Barzeski on the Golf IQ Podcast (Golf Digest) Series on Golf Dads

      By iacas · Posted

      I was on Golf Digest's Golf IQ podcast with Sam Weinman talking about being a "golf dad." https://www.golfdigest.com/story/5-golf-dads-advice I followed: Ian Poulter Mike Thomas Johnson Wagner Kevin Van Valkenburg Apparently the series was only five parts long, as they wrote up a summary article on it.   Golf Dad Part 5: Erik Barzeski on how to switch between father and instructor Podcast Episode · Golf IQ · March 2 · 35m Golf Dad Part 5: Erik Barzeski on how to switch between father and instructor — Golf IQ Erik Barzeski, Director of Instruction at Golf Evolution, is the father of a golf pro and an author, but also has the perspective of someone who works with juniors. The ability to switch between wearing those different...
    • Ty_Webb
      My Swing (Ty_Webb)

      By Ty_Webb · Posted

      They sure do. 158 with an 8 iron is on the high end for me
    • saevel25
      My Swing (saevel25)

      By saevel25 · Posted

      Went back to controlling my knees. That part was getting a bit sloppy when I worked on my backswing. Right hip didn't slide or gain internal rotation. I would just rotate back and around and the left knee would be in a bad spot. Really focusing now on keeping my left knee very stable and straighter in the backswing. I can't go back to the old pattern of overturning the hips. I was returning to my old pattern to time my downswing. Turn forever.  Left knee controls both knees and hips, acting as an anchor. Feel like it straightens a bit.   Hinge sooner and faster. Not in a way that sends the hands out and flips the club over. I still noticed when the hands get to A2.5, the hands would want to flip over and flatten the club out a ton.  Still trying to figure out how to roll the forearms a bit open and not just roll the club inside a ton.  Figure out the timing to get the hands down. Still getting a bit of right elbow collapsing in the downswing because the arms are too high when I turn. Everything is happening sooner now. If the hips are controlled, the backswing is shortened. Because it is shortened I don't know when to get the hands down and I just turn because the downswing is a go.  Very slow (50%) swings are decent.  
    • iacas
      My Swing (Ty_Webb)

      By iacas · Posted

      Distances look fine, no?
    • 5amZ
      "5 Minutes Daily" Practice Challenge

      By 5amZ · Posted

      Day 207-12 Wider backswing and arm reconnecting in downswing. Did a much better job with proper wrist movements through downswing today.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

  I accept