Jump to content
Note: This thread is 6810 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Just as I think I'm getting it right... something gives way. Lately, I find that I'm swaying in front of the ball on my downswing, causing really bad connection with a severe loss of distance and low-flying shots. Any drills to correct this? I don't know what aspect of my swing to concentrate on! This is a confidence-killer

In the bag
Driver: MP001 10* Aldila NV
Hybrid: Tour Edge JMax Bazooka 27*
Irons: x12
Putter: Tour Edge BackdraftBall: MoJo


Take an old clubshaft, (or a stick), and place it vertically into the ground so that the top of it is just above your belt line.

Take your normal address stance with your target-side hip just touching the stick or shaft, (your left hip, if you're a right-handed player). The stick or shaft should be embedded in the ground deep enough to provide moderate to firm resistance when you push against it. Take a swing and when you sway sideways, you'll contact the stick and feel it pushing against your hip. Practice swinging so that your hip does not move the stick. The feeling is similar to standing with your hip against a wall and the image of a wall should keep you from moving too far sideways.

A lateral movement towards the target is natural, but too much movement causes the results you've described. This "stick drill" will serve to remind you where your hip should be at impact. Once you get used to the feeling of slightly contacting the stick, remove it and practice shots without it. If you feel like you're swaying again, put the stick back and practice some more.

Soon, you'll build some muscle memory to avoid pushing into the stick and you'll be on your way to solving the problem.

-JP
My Bag:

Driver: Golfsmith Compressor 400, 9-deg., Aldila NV75-X
3 Wood: Golfsmith Viper 15-deg., Aldila NV85-X
Hybrid:(2) Golfsmith Quick Strike Tour, 21,18-deg., YS-9.1+Irons: Golfsmith 600-B Forged Blades, 2-PW, TT X-100, All Soft-stepped/Lofts 2-deg. upright.Wedges: Golfsmith 52, Cleveland 56,...

All of the above, and make sure that your head doesn't drift in front of the ball EVEN ONE IOTA on the downstroke and through contact. Usually when I start pushing the ball way right, it's because my head has drifted forward, when I realise that it's quite easy to correct. And then later it happens again of course.

Driver: Cobra 460SZ 9.0, med.
3 Wood: Taylor stiff
3-hybrid: Nike 18 deg stiff
4-hybrid:
Taylor RBZ 22 deg regular
Irons:5-9, Mizuno MP30, steel
Wedges: PW, 52, 56, 60 Mizuno MP30
Putter: Odyssey 2-ball


Note: This thread is 6810 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 335 - More putting work, with the focus on setup and hitting the sweet spot. 
    • Day 153: putted for a while using the 2 cups drill inside. Working on bead primarily. Contact was really good. 
    • Day 8: 12/17/2024 Okay I took my new PPJ swing thought to the range today. I wasn't sure I was quite ready to do so, but I'm glad I did.  When I got it right it was good... really good. When I got it wrong it was a major fail. I hit lots of really ugly ones. But I didn't let that deter me. I stayed committed and focused on the PPJ and I avoided any temptation to go back to what I was doing before just so that I could "look" better at the range. I'm pretty excited about what I saw when I got it right.  I hit the 6 iron mostly (nearly all block work today). I also hit about 6 balls each with the PW, 8I, 5W and Driver. Those had varying degrees of success. I did crack one drive that let me feel and see what the changes will look like once I get fully trained.  Anyway, I'm going to go back to the mirror work for a couple of more days before bringing it back to the range. I do feel like if I can get this right my swing will improve a lot. So I think its worth the effort. I liked the way it looked on GEARs when I get it right, and I like the results I got at the range when I got it right. Now the goal is to work towards getting it right more often. 
    • So I think it's that they can't just bend the shaft or hosel to get it to a new lie angle. They adjust that and it changes the weighting, so they have to then adjust all the weights to get it balanced again. I get the impression that it's a bit of an iterative process and they do it all in the US, so they're paying US labor costs to build it and make it work how it's supposed to. Whether you believe in the tech or not, I think that's a true statement.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...