Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6188 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
So just bought a brand new pair of Adidas Tour LTD shoes. They are nice and comfortable. Was curious if anyone had any suggestions about installing softspikes on the shoes. Wondering if I should remove the softspikes prior to taking on the course and coat the screws with vaseline or a soapy solution so that they are easy to remove once they are worn down. My thoughts are to have these shoes for 3-4 seasons and want to make it easy to replace spikes often. Any tricks on how to make sure the spikes are easy to remove once they are worn down?

Thought I remember reading something about coating the inserts with vaseline or some solution to make removal easier once they are worn down. Or is this just not necessary on the newer shoes? Thought I saw some article in GolfDigest or GolfWeek if I remember right about this. Thanks....

Posted
before you install them it's not good to put vaseline or whatever on the screws because you'll prolly have them come off while playing shortly there after...to get them off i'd suggest brushing them clean, and soaking the bottoms in soapy water for about 10 minutes...should come out without a trick. i've had my Nike TW SP7's for 3 years now and been through about 6 sets of spikes...love em

In my Titleist 2014 9.5" Staff bag:

Cobra Bio+ 9* Matrix White Tie X  - Taylormade SLDR 15* ATTAS 80X - Titleist 910H 19* ATTAS 100X - Taylormade '13 TP MC 4-PW PX 6.5 - Vokey TVD M 50* DG TI X100 - Vokey SM4 55 / Vokey SM5 60* DG TI S400 - Piretti Potenza II 365g


Posted
I've never done anything special. Take 'em out, put 'em in.

In David's bag....

Driver: Titleist 910 D-3;  9.5* Diamana Kai'li
3-Wood: Titleist 910F;  15* Diamana Kai'li
Hybrids: Titleist 910H 19* and 21* Diamana Kai'li
Irons: Titleist 695cb 5-Pw

Wedges: Scratch 51-11 TNC grind, Vokey SM-5's;  56-14 F grind and 60-11 K grind
Putter: Scotty Cameron Kombi S
Ball: ProV1

Awards, Achievements, and Accolades

Posted
do they have the small metal threads? My old nikes were like that and the spikes got "frozen" into the shoe and it took a week of soaking in wd-40 to remove them.

I though they changed to the new design on all newer shoes. Most are just plastic threads now that cant seize.

In my Staff bag:
Bazooka HP-5 Driver 460cc
Bazooka OS HP-5 3/5 Woods
Jmax QL Irons 5-PW (Graphite Stiff Shafts)
X-tour Gap Wedge 52* X-tour Sand Wedge 56* Lob Wedge 60* Rossa Daytona 1 Putter


Posted
I'd put some WD40 or something on them. It's a nightmare to get them out if they get frozen in.

---"Be the ball"---

IN THE Hoofer Vantage BAG:
Driver: F-Speed 10.5°, Aldila NV-F
Woods: F-Speed LD 3 & 5, Aldila NV-FIrons: S9 3-PW, NS-Pro 900XH SteelWedges: CG10 52° & Spin Milled 56.10Putter: Studio Select Newport 2Ball: Pro V1x SG4


Note: This thread is 6188 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 5: did a stack session. Did some slow swings between sets, working on hands down. 
    • So, I might have to get out of the C-Taper golf shaft. I have an older Mizuno with a KBS Tour shaft in. I was messing around with closing my eyes and feeling where the weight of the club is being felt at. The C-Taper was all in my fingers. I didn't feel much of anything of the club head or shaft of the club. It felt super heavy in my hands. The KBS Tour I could feel a weight further away from my hands, out in space.  The Mizuno weights 2 grams more, but is about 2-3 swing weights lighter than my current irons.  So, yea. I am thinking I might sense the club better with maybe a less stout golf shaft and maybe a lighter swing weight. Probably more to do with the golf shaft. I am thinking the feeling of the weight out in space is more of the shaft loading more easily. 
    • Day 25 (2 Apr 26) - Worked on green side chips at the course before helping with the school golf tournament today.  Worked on low flighted spinners to get solid hop and stops.  
    • Day 227 4-2 Chest and hip turn with flow drill. Trying to get a rhythm to the hip movement/less segmented feeling. 
    • A bit back at it tonight. I just wanted to add in the feel of a softer left arm through out the backswing. This helps me hinge the club. I make sure I am not bending it a ton, but not straightening it. It helps feel like I can keep the club in front of me more and lift the club up sooner.   
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.