Jump to content
IGNORED

What problems will "open" shoulders cause


Caddyshack
Note: This thread is 5342 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

It will cause a slice or a fade,or in some cases pending on swing type a low pull to the left.

aeroburner tp 10.5 stiff
superfast tp 2.0 3 wood stiff
Halo 25 and taylormade tp 19 degree hybrids
miura cb 202 and wedge
tp 52* wedge, tp 56* taylormade spider mallet putter

Link to comment
Share on other sites


Just after some input , what will open shoulders cause? When i say open i mean the shoulders pointing left of target as i am lined up. The way i see it it will cause a slice but not 100% sure

The way they point at setup shouldn't matter. You say that they point "left of target" so it sounds like your feet, hips, club face, etc.. are allowing to define a correct target line. As long as you get into the correct impact position it doesn't matter what you looked like before that. IMO

I would guess that if it f-ed you up at all it would be that it made it hard to aim at all having your different lines out of parallel.

The bag:

Driver: Taylormade R7 Limited (10.5*)
3-wood: Taylormade R7 st (15*)
5-wood: Titleist 909 F2(18.5*)Irons: Taylormade RAC TP MB; Project-X 6.0 (3-PW)Wedges: Vokey Spin-Milled 52.08 Vokey Spin-Milled 58.12Putter: Odyssey White Hot Tour #1 (33")Ball: Titleist ProV1

Link to comment
Share on other sites


The way they point at setup shouldn't matter. You say that they point "left of target" so it sounds like your feet, hips, club face, etc.. are allowing to define a correct target line. As long as you get into the correct impact position it doesn't matter what you looked like before that. IMO

But, it's much easier to have your shoulders pointed at the target to begin with that have to adjust mid-swing. You don't need your grip to be right before you swing, so long as you adjust it mid-swing to a propper grip?

For me, the open shoulders (which was a thing I worked on during my last lesson) caused me to drop the club way inside to compensate for it. Basically, I was aligned left with my shoulders (not my feet) and my brain had a problem with swinging that direction since it wouldn't go the right way. (I also think on my takeaway I started the club on the shoulder line resulting in an outside-in swing.) So, I unconsciously swung from the inside to hit the ball on the right line. I had a reverse-C position and my misses were generally dead pushes. I'm sure it's different for everyone, but that's what open shoulders did to me.

In my Ogio Ozone Bag:
TM Superquad 9.5* UST Proforce 77g Stiff
15* Sonartec SS-2.5 (Pershing stiff)
19* TM Burner (stock stiff)
4-U - PING i10 White dot, +1.25 inches, ZZ65 stiff shafts55*/11* Snake Eyes Form Forged (DGS300)60*/12* Snake Eyes Form Forged (DGS300)Ping i10 1/2 MoonTitleist ProV1

Link to comment
Share on other sites


Note: This thread is 5342 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • I tried hybrids way back when TaylorMade introduced the copper orange Firesole Rescue, the clubhead having been made of titanium which was still relatively new even in drivers back then. I couldn't hit it well at all, and while the success of hybrids suggests that the modern ones must be quite good,  I'm perfectly happy with the 5, 7, and 9-woods.  Early ones of mine were Top Flite Intimidator 400s made by Spalding... and also made of titanium, now that I think of it.  I still have them in my basement. I do bag a driving iron, but it's a one-trick-pony that never sees fairway use.    
    • The last time I played Maxfli balls, Dunlop was still making them. How long ago was that? Mostly, though, I used to play Top Flites (original 336 dimple model) when Spalding was still making them. Now I play the Pro V1x. Last time that I ordered some, Titleist was still making them. Let's see how long that lasts.
    • Once, on a course in Middleton, Massachusetts that I used to love but has since closed down,  I hit the wrong half of a huge, UK style double green.  Then I made the hundred foot putt.  Tough to  forget that one.
    • No. But if I can still play next year, I'll almost certainly be even worse. That's the reality of not being young.🙁  
    • I use GPS;  it may not be as accurate, but neither am I.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...