Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5919 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Hi All! I'm new to these forums. I'd like to ask a few questions about my gear and get some advice. First, let me list what I've got, then I'll follow with a list of questions. Feel free to respond to any/all of them. Thanks!

Driver: Taylormade R7 Quad - Stiff Shaft
3 Wood: Taylormade R5 - Same Shaft as driver
Irons: Mizuno MP-60 (3-PW) .75 in long
Wedges: Titleist Vokey 52.08, 56.14, 60.08 (also 58.08 Spin Milled)
Putter: Odyssey #9

Also, I'm 23 and I swing hard. I have a tendency to slice the driver and push the irons to the right. I've been told that this is because I have too much backswing.

Ok, now the questions:

1. I bought the driver from a friend and I realized that all 4 of the weights are 2oz...This is way too light, but I'm not sure what weights I should put in and where, based on my hard swing and tendency to slice. Please advise. Also, any advice on where to find these weights at a good price would be helpful!

2. I also purchased the irons from a friend who is tall. I'm about 5'11 and average build. Should I have the irons cut down to standard length since they're .75 in long?

3. I currently have 4 Vokey wedges (listed above) and I'm not sure which ones to carry. I like the idea of the 52, 56, 60 but the 58 is a sweet club as well and its spin milled. Please advise on which wedges to carry.

Posted
you can get the weight for around 8 dollars on tgw.com.
for your second question, i think that you should cut the shaft down. i think this makes the shaft a little stiffer but if the shafts are regular i think you could handle a stiff with your irons since you have it in the driver.
for the wedges it up to you. i only play three: PW, 54 degree Vokey SM and 58 degree Vokey SM. if you don't feel that you need for 4 wedges than i would advise you to take out the 56 and 60 and play with PW, 52 & 56. this would leave you with 6 degree gaps which is not a lot. again it's entirely up to you. personally i would stick with you current set up.

Posted
OP where in Tampa are you located? I am in Tampa every other weekend and need to find a reliable playing partner. My friends always beg for me to come visit, but never have the time when Im actually in town. I stay with my GF about a mile from the Hard Rock casino and usually play summerfield, apollo beach, diamond hill, walden lakes...maybe we can get a round in sometime.

Kyle Paulhus

If you really want to get better, check out Evolvr

:callaway: Rogue ST 10.5* | :callaway: Epic Sub Zero 15* | :tmade: P790 3 Driving Iron |:titleist: 716 AP2 |  :edel: Wedges 50/54/68 | :edel: Deschutes 36"

Career Low Round: 67 (18 holes), 32 (9 holes)

Awards, Achievements, and Accolades

Note: This thread is 5919 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.