Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5905 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Does anybody have an FT9 Tour with either of these shafts? How do they play? I hit the ball with a high launch already as well as low spin...with the drivers I have used in the past. I played a round with the FT9 Tour with the Voodoo shaft in it and liked it but it wasnt mine(but felt like I lost a little distance compared to my gamer). I have access to these two shafts before playing in a tourney this week. My normal swing is 105-108mph...but can get it up above 110 at times. These shafts are both in stiff flex...and I have yet to hit either. Of course I am going to hit them both on the range before making a decision, but would like to have some opinions and ideas before making it. Thanks.

Driver: Ti460 with stock Fujikura G60 shaft in stiff flex
3W: SQ Dymo2
Hybrid: FT 20*
Irons: 755
SW: SV 56*GW: Vokey 50*LW: Vokey 60*Putter: SC Red XHome Course: Wildcat Golf Club


Posted
Is there a secret catch phrase that I need to include in my posts for someone to respond? ;)

Driver: Ti460 with stock Fujikura G60 shaft in stiff flex
3W: SQ Dymo2
Hybrid: FT 20*
Irons: 755
SW: SV 56*GW: Vokey 50*LW: Vokey 60*Putter: SC Red XHome Course: Wildcat Golf Club


Posted
No specific knowledge on either of those combos, but I'd be hesitate to switch drivers a week before a tournament.
Driver: Adams 9032LS 9.5* - 45" - Aldila RIP Alpha 60S
3 Wood: Adams FAST 10 15* - 43" - Aldila Wasabi 70S
2-Iron: Mizuno Fli-Hi 18* - DGS300 
Irons: Mizuno MP-68 3-PW - DGS300
Wedges: Mizuno MPT-11 54* and 60*Putter: PING Redwood Anser Black Nickel 340g, 34"Ball: Titleist ProV1Bag: Mizuno...

Posted
I have the same driver. I originally bought it with the fubuki tour. It was pretty stiff, low launch, couldn't hit it high enough. I sent it back for the non tour model. Getting it tommorow. I don't have any insight in to any other shafts than the one I bought.

Brian


Posted
Thanks for the replies...I am spraying my gamer more than usual the past couple months. I think this mainly has to do with the fact that I have been playing it for 10yrs and the shaft has lost some of its strength. I hit it a ton, but its hard to score when you are in the trees.

I hit the Zcom and the BB and feel that the Zcom is a little too boardy feeling and the BB is a bit soft for a stiff shaft...may move up to the xstiff BB.

Driver: Ti460 with stock Fujikura G60 shaft in stiff flex
3W: SQ Dymo2
Hybrid: FT 20*
Irons: 755
SW: SV 56*GW: Vokey 50*LW: Vokey 60*Putter: SC Red XHome Course: Wildcat Golf Club


Note: This thread is 5905 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I would think of it in terms of time. The time it takes to get the arm angle into a good position to deliver the club with proper shaft lean. Another component is rotation, but that is also a matter of timing. It relates to how the body stalls to give the golfer time to hit the ball. If you have to get 80+ degrees out of that right elbow in one third of a second versus 50 degrees in the same time then you have to steal time from somewhere. It is usually body rotation. That does not help with shaft lean.  I agree in that amateurs tend to make the swing more complicated than pro golfers. 
    • I haven't been able to practice like I wanted and won't for the next week.  1. The weather sucks in Ohio this year. I have been mostly inside hitting foam balls. Just kind of my basic stuff.  2. I woke up last Saturday with a left side rib muscle on fire. If I turned or leaned a certain way it would spasm that almost buckled my knees. I have been taking a break to let that settle. I don't want to get a long term injury. I think I pinched a nerve or just aggravated a muscles.   3. I am going on a mini-vacation to Florida (screw you Ohio weather) with a friend, and rolling that into a work conference I have next week. I will be with out my clubs for a week.  I will be back next in two Fridays to hit the ground running with some warmer temps and better weather in Ohio, hopefully. I would really like to get more out on the course and the range.     
    • Day 580 - 2026-05-04 Played eight holes. Sometimes golf kicks you in the nuts. 😉 
    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
    • We had a member of our senior club who developed a mental block on pulling the trigger. I played with him to see what the membership was talking about. I timed him a few times when he would get over the ball. 45 seconds. He knew he had a mental block and would chide himself, “Just hit it!” Once on the green he was okay and chipping was a bit better. It was painful to watch him struggle. Our “bandaid” was to put him in the last tournament  tee time with two understanding players. We should have suggested to him to take a break from our tournaments. I agree with the idea that when a player realizes they have a problem, the answer is to go fix it and not return until they are able to play at an acceptable pace.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.