Jump to content
Note: This thread is 6669 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

I am planning on buying a Cleveland CG11 wedge that is 52 degrees, that has 10 degrees of bounce, but i want to bend it down to 51. Or should i buy the 50 degree wedge with 8 degrees of bounce?

Thank you in advance for answering


I was asking one of my friends how much his golf shop charged to bend the wedges and when he found out it was my CG10 I wanted bent he suggested that I either contact Cleveland and have them do it or get it done at one of their tour vans.

His reasoning was that the techs at his shop don't do it because of the materials used that they break easier when being bent.....I don't know the validity of this claim but I sent an email to my local Cleveland rep just to be safe. I'll let you know the reponse I get.

In regards to your original question I don't believe it makes a difference to whether you bend up or down.

Driver: R7 9.5° Stiff

3W: V-Steel Steel Shaft Stiff

4W: Steelhead 4+ Steel Shaft StiffHybrid: CLK FLI-HI 20° Steel Shaft StiffIrons: MP-60 3-7, MP-32 8-PW Project X 5.5Wedges: CG10 50°, 54°, 58° Wedges, 2 dotPutter: White Steel 2 Ball Center Shaft


I am planning on buying a Cleveland CG11 wedge that is 52 degrees, that has 10 degrees of bounce, but i want to bend it down to 51. Or should i buy the 50 degree wedge with 8 degrees of bounce?

lilxkrnxkangsta, In terms of the effective bounce and loft after bending, either option will yield the same, a wedge with 51 degrees of loft and 9 degrees of bounce. What will make a difference is the offset. Bending a wedge weak will decrease the apperance of offset while bending it strong tends to add offset. Although with a change of one degree this will likely be a non issue. One more thing to consider is the Cleveland CMM material which can be a bit brittle and quite easy to snap under the bending bar. A one degree change should be easy to accomplish by a compotent clubmaker, but understand that there is a risk associated.

I just spoke with a Cleveland Rep today he said Cleveland will do the modifications for free, I just need to pay shipping to them and they'll handle the rest. He said the only catch is it needs to be sent in by a Cleveland Authorized Seller, so most any golf shop. With you only bending it 1° you might be able to find a clubmaker that will handle it.

Driver: R7 9.5° Stiff

3W: V-Steel Steel Shaft Stiff

4W: Steelhead 4+ Steel Shaft StiffHybrid: CLK FLI-HI 20° Steel Shaft StiffIrons: MP-60 3-7, MP-32 8-PW Project X 5.5Wedges: CG10 50°, 54°, 58° Wedges, 2 dotPutter: White Steel 2 Ball Center Shaft


Thank you guys so much for helping me on this issue. If I can find an authorized clubmaker I will definately have him bend the wedge for me. Otherwise I'll probably send it to Cleveland.

Note: This thread is 6669 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    TourStriker PlaneMate
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I'm quoting myself, only because I want to link up to the relevant information from the Rules.  These are the current rules, but I don't think the 2016 version differed very much.  First is Rule 16.1, for relief form Abnormal Course Conditions.  A cart path is an Immoveable Obstruction, one of the four ACCs.   Others have quoted the provision that you can't take relief for an unreasonable stance or type of swing, it sounds like relief was appropriate in this case.  The Reference Point is the Nearest Point of Complete Relief, and a diagram is provided.  So we refer to the Definition of the Nearest Point of Complete Relief.  The NPCR allows relief from the cart path, for the type of swing the Player would have made if the cart path had not been there.  Specifically, the Definition says: "The nearest point of complete relief relates solely to the particular condition from which relief is being taken and may be in a location where there is interference by something else" So there might be interference from a tree or bush, a clear swing isn't guaranteed.  I'll go back to Clarification 16.1/1, which says that Relief from an ACC might result in better conditions, or worse conditions.  However, the NPCR for a ball in the General Area MUST be in the General Area (Rule 16.1b), its not in a Bunker of a Penalty Area.  That's not to say you might not have to stand in a Bunker or Penalty Area, just that the Ball won't be in it. You can find all of these on the Rules of Golf app on your phone, or on the USGA's webpage: https://www.usga.org/rules/rules-and-clarifications/rules-and-clarifications.html#section=rules&itemNum=19&subItemNum=1
    • Maybe they wouldnt be tearing them up if shots that  miss the green or fairway were penalized with deep rough
    • Wordle 1,297 4/6 🟩⬜⬜⬜⬜ 🟩⬜⬜⬜🟨 🟩⬜🟨🟨⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,297 3/6 🟨⬜🟨🟨⬜ ⬜⬜⬜⬜⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,297 4/6 ⬜⬜⬜🟩⬜ 🟨⬜⬜🟩⬜ 🟩⬜🟩🟩🟨 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...