Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5383 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

The thread title basically says it all.  This is my first thread on here so let me know if I posted this in the wrong section.

Those are the 3 sets of clubs i'm looking at.  I can get the shafts custom for no upcharge, so feel free to give input on those as well.

I am a 6 handicap, and I hit the ball pretty high.  I am looking for a set that allows for maximum workability, but still has a little forgiveness.

What do you guys think?

Driver: Titleist D3 9.5, Project X
3 Wood: Adams Tight Lies
Irons: Titleist AP2
Wedges: 51 Degree Cleveland, 54 and 58 Degree CG 15
Putter: Ping Kushin (Old School Baby!)


Posted

im a 4 and love my ap2 with px 6.0.  GREAT STICKS.  actually brought my ball flight down a little and are a club longer than my callys


Posted

All great sticks but for your HC I would say the Nike Combo Irons would provide the best workability and playability out of all of them. I am not saying that you can't work the ball with either the AP2 or X forged because you can but the Pro Combos do have three irons (8-PW with a low flight) that are blades and are the scoring clubs in the iron set that will have a high amount of workability as well as the cavity (3,4 to get the ball up) and split cavity (5-7 to get that forgiveness and a mid flight) irons you get as well.

- VR Pro LTD - 9.5 Ahina X

- VR_S 3, 5 woods - Fubuki X

- VR Pro Combo - 3-Pw S300's
nike.gif - VR VRev Wedges - 52, 58 

- Method 001 - 34in.

- 20XI-S

- 20XI Staff Bag

 


Posted

Welcome !

These sets are almost identical allthough I would say the new X-Forged to be more or less a club for the near scratch player, it is less forgiving than you would expect !

The new Pro Combo set is less workable in the long irons and the AP2 has a good mix of forgiviness, feel and workabillity.

As for shafts you might like the Project X 5.0 or 5.5 which are stiffer than the Dynamic gold R300 / S300 and will get you ballflight down. Project X 6.0 is way stiffer than S300 and 99% of the guys that think they need Project X 6.5 will end up crippled in a few weeks.

Hit all and pick the one you like best.......

(maybe have a look at Titleist 710 CB as well as you really like the X forged)

Cal Razr Hawk 10.5 | TM Superfast 3W | Adams Idea Pro Black 20 | MP-68 3-PW | TW9 50/06 + 58/12 | Ram Zebra Putter


Posted

Thanks for the replies guys.  I plan on trying all three sets.  I'll keep you posted when my decision is finalized.

Driver: Titleist D3 9.5, Project X
3 Wood: Adams Tight Lies
Irons: Titleist AP2
Wedges: 51 Degree Cleveland, 54 and 58 Degree CG 15
Putter: Ping Kushin (Old School Baby!)


Note: This thread is 5383 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • In terms of ball striking, not really. Ball striking being how good you are at hitting the center of the clubface with the swing path you want and the loft you want to present at impact.  In terms of getting better launch conditions for the current swing you have, it is debatable.  It depends on how you swing and what your current launch conditions are at. These are fine tuning mechanisms not significant changes. They might not even be the correct fine tuning you need. I would go spend the $100 to $150 dollars in getting a club fitting over potentially wasting money on changes that ChatGPT gave you.  New grips are important. Yes, it can affect swing weight, but it is personal preference. Swing weight is just one component.  Overall weight effects the feel. The type of golf shaft effects the feel of the club in the swing. Swing weight effects the feel. You can add so much extra weight to get the swing weight correct and it will feel completely different because the total weight went up. Imagine swinging a 5lb stick versus a 15lb stick. They could be balanced the same (swing weight), but one will take substantially more effort to move.  I would almost say swing weight is an old school way of fitting clubs. Now, with launch monitors, you could just fit the golfer. You could have two golfers with the same swing speed that want completely different swing weight. It is just personal preference. You can only tell that by swinging a golf club.     
    • Thanks for the comments. I fully understand that these changes won't make any big difference compared to getting a flawless swing but looking to give myself the best chance of success at where I am and hopefully lessons will improve the swing along the way. Can these changes make minor improvements to ball striking and misses then that's fine. From what I understood about changing the grips, which is to avoid them slipping in warm and humid conditions, is that it will affect the swing weight since midsize are heavier than regular and so therefore adding weight to the club head would be required to avoid a change of feel in the club compared to before? 
    • I think part of it is there hasn't been enough conclusive studies specific to golf regarding block studies. Maybe the full swing, you can't study it because it is too complicated and to some degree it will fall into variable or random.  
    • Going one step stiffer in the golf shaft, of the same make and model will have minor impact on the launch conditions. It can matter, it is a way to dial in some launch conditions if you are a few hundred RPM off or the angle isn't there. Same with moving weights around. A clubhead weights 200-220 grams. You are shifting a fraction of that to move the CG slightly. It can matter, again its more about fine tuning. As for grip size, this is more personal preference. Grip size doesn't have any impact on the swing out of personal preference.  You are going to spend hundreds of dollars for fine tuning. Which if you want, go for it. I am not sure what your level of play is, or what your goals in golf are.  In the end, the golf swing matters more than the equipment. If you want to go to that level of detail, go find a good golf club fitter. ChatGPT is going to surface scan reddit, golfwrx, and other popular websites for the answers. Basically, it is all opinionated gibberish at this point.   
    • Wordle 1,640 4/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜🟩 ⬜🟩🟩🟩🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.