Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6705 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I have struggled with one terrible problem: I tend to cast my driver, and rather than creating the greatest clubhead speed at impact, I create it behind the ball before I hit it. The result, of course, is less distance. Any suggestions how I can get the feel of not casting? I need help!

shortgame85
In the Bag:
Driver: :TaylorMade: RBZ 9.5 Reg Flex
3 Wood :TaylorMade: RBZ Reg Flex
Hybrid: Ping G25 Hybrids 17*, 20*, 23*

Irons:Ping G25 5-Gap Wedge, Sr Flex, Vokey 56.14 Spin Mill NS Pro Reg, Flex

Putter: Bobby Grace Center Shaft 32"


Posted
Check these out. They will help you stop casting.

This PGA.com video has a drill that will help you feel the proper donswing action
http://www.pga.com/popup/iyg/2007/video/001803.html

Driver- Geek Dot Com This! 12 degree Matrix Ozik Xcon 6 Stiff
Adams Tour Issue 4350 Dual Can Matrix Ozik Xcon 5

Hybrids- Srixon 18 deg
Srixon 21 deg Irons- Tourstage Z101 3-PW w/Nippon NS Pro 950 GH - Stiff Srixon i701 4-PW w/ Nippon NS Pro 950 GH-Stiff MacGregor...


Posted

My problem wasn't so much casting but that I was releasing too early, if that makes sense.

The drill that's worked wonders for me is putting a ball about a foot ahead of my left foot (for a right-handed golfer) and trying to hit it. The only way you can hit a ball that far forward is to delay your release and not cast.

Even on the course, I will pick an intermmediate target along the target line and about a foot ahead of my left foot and try to hit it with my swing.


Posted
My problem wasn't so much casting but that I was releasing too early, if that makes sense.

Casting, early release, leakage are all the same thing.

Driver- Geek Dot Com This! 12 degree Matrix Ozik Xcon 6 Stiff
Adams Tour Issue 4350 Dual Can Matrix Ozik Xcon 5

Hybrids- Srixon 18 deg
Srixon 21 deg Irons- Tourstage Z101 3-PW w/Nippon NS Pro 950 GH - Stiff Srixon i701 4-PW w/ Nippon NS Pro 950 GH-Stiff MacGregor...


Posted
Casting is more of a reaction to a poor coil. The upper body lacks tension with the lower body at the top of the back swing so the brain recruits the arms to start the downward motion for power resulting in an early release. If you can work on a tight rotated coiled back swing with no sway, it is easier to start the downswing with the lower body which drops the arms down before the shoulders rotate. Aim to time the lower body move while the shoulders are still turning back and you will create more hinge and hinge save (lag) in the downswing. Attempting to fix the problem from the top, rarely works because the root cause is always there and you are too "position focused" to swing freely through the ball. Find an old tree and a hatchet and chop it a few times and then notice how your lower body pivot and coil does all the work. Your upper body simply reacts to the lower. Try to gain this feeling in your golf swing.

Posted
I have struggled with one terrible problem: I tend to cast my driver, and rather than creating the greatest clubhead speed at impact, I create it behind the ball before I hit it. The result, of course, is less distance. Any suggestions how I can get the feel of not casting? I need help!

You're either decellerating your armswing, tensing up, or both.

My recommendation... http://www.golfcircuit.com/instruction/tip.asp?id=15 (for once I'm just going to let someone else do all the typing. )

Equipment, Setup, Finish, Balance, and Relax. All equal in importance and all dependent on each other. They are the cornerstones of a good golf swing.


Posted
Be wary of advice from someone with a hcp much over 2, but you asked, so I'll give you my advice.

A pro gave me a lesson where I was casting a little, and he gave me a swing thought that banished this disease for me almost instantly.

As you swing back and cock your wrists, you will form an angle between your RIGHT forearm and wrist. As you swing down, try to hit the ball while maintaining this angle, never releasing it. Centrifugal force will end up forcing you to release it, but if you concentrate on maintaining that angle as long as possible, you can't cast the club from the top.

If this doesn't improve your problem, then see a pro, because maybe you're not casting, but just think you are...

JP Bouffard

"I cut a little driver in there." -- Jim Murray

Driver: Titleist 915 D3, ACCRA Shaft 9.5*.
3W: Callaway XR,
3,4 Hybrid: Taylor Made RBZ Rescue Tour, Oban shaft.
Irons: 5-GW: Mizuno JPX800, Aerotech Steelfiber 95 shafts, S flex.
Wedges: Titleist Vokey SM5 56 degree, M grind
Putter: Edel Custom Pixel Insert 

Awards, Achievements, and Accolades

Posted
Best way I know of helping to get rid of early release is taking a wedge and hitting balls one handed, right and left hand only.

Put the ball in the middle of your stance and hit balls with your leading hand only, then hit some with your trailing hand only. There is no way to hit solid crisp shots with only one hand if your hand is not in front of the ball at impact. If you release too early you will either hit right behind the ball or you will hit them really thin.

Note: This thread is 6705 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • In terms of ball striking, not really. Ball striking being how good you are at hitting the center of the clubface with the swing path you want and the loft you want to present at impact.  In terms of getting better launch conditions for the current swing you have, it is debatable.  It depends on how you swing and what your current launch conditions are at. These are fine tuning mechanisms not significant changes. They might not even be the correct fine tuning you need. I would go spend the $100 to $150 dollars in getting a club fitting over potentially wasting money on changes that ChatGPT gave you.  New grips are important. Yes, it can affect swing weight, but it is personal preference. Swing weight is just one component.  Overall weight effects the feel. The type of golf shaft effects the feel of the club in the swing. Swing weight effects the feel. You can add so much extra weight to get the swing weight correct and it will feel completely different because the total weight went up. Imagine swinging a 5lb stick versus a 15lb stick. They could be balanced the same (swing weight), but one will take substantially more effort to move.  I would almost say swing weight is an old school way of fitting clubs. Now, with launch monitors, you could just fit the golfer. You could have two golfers with the same swing speed that want completely different swing weight. It is just personal preference. You can only tell that by swinging a golf club.     
    • Thanks for the comments. I fully understand that these changes won't make any big difference compared to getting a flawless swing but looking to give myself the best chance of success at where I am and hopefully lessons will improve the swing along the way. Can these changes make minor improvements to ball striking and misses then that's fine. From what I understood about changing the grips, which is to avoid them slipping in warm and humid conditions, is that it will affect the swing weight since midsize are heavier than regular and so therefore adding weight to the club head would be required to avoid a change of feel in the club compared to before? 
    • I think part of it is there hasn't been enough conclusive studies specific to golf regarding block studies. Maybe the full swing, you can't study it because it is too complicated and to some degree it will fall into variable or random.  
    • Going one step stiffer in the golf shaft, of the same make and model will have minor impact on the launch conditions. It can matter, it is a way to dial in some launch conditions if you are a few hundred RPM off or the angle isn't there. Same with moving weights around. A clubhead weights 200-220 grams. You are shifting a fraction of that to move the CG slightly. It can matter, again its more about fine tuning. As for grip size, this is more personal preference. Grip size doesn't have any impact on the swing out of personal preference.  You are going to spend hundreds of dollars for fine tuning. Which if you want, go for it. I am not sure what your level of play is, or what your goals in golf are.  In the end, the golf swing matters more than the equipment. If you want to go to that level of detail, go find a good golf club fitter. ChatGPT is going to surface scan reddit, golfwrx, and other popular websites for the answers. Basically, it is all opinionated gibberish at this point.   
    • Wordle 1,640 4/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜🟩 ⬜🟩🟩🟩🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.