Jump to content
IGNORED

My Swing (xsv345)


xsv345
Note: This thread is 3954 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

I've been Playing Golf for: 3 years on off

My current handicap index or average score is: 100+ score

My typical ball flight is: to the right/slice, hit driver high slice everytime

The shot I hate or the "miss" I'm trying to reduce/eliminate is: shank/slice.

Videos:

Link to comment
Share on other sites


I'm probably not the one to ask, but the things I see are:

good turn

good straight left arm

looks like right arm is folding a little  prematurely on the backswing.

you could more than likely have more control by shortening the backswing a little (not necessary to get parallel at the top unless you can maintain control). Keep elbows more in to the torso.

your arms are in front of the body through most of the swing which is good. (as opposed to getting "stuck" behind the body).

I thought I saw a little "twitch" at the top of the swing where the plane changed a few degrees

coming down, club face was fairly open, but looked as though you got it pretty square at impact.

good extension

good finish.

all in all, from my untrained eye, a decent looking swing.

"James"

:titleist: 913 D3 with Aldila RIP Phenom 60 4,2 Regular Shaft,  :touredge: Exotics XCG-7 Beta 3W with Matrix Red Tie Shaft:touredge: Exotics EX8 19 deg Hybrid w UST Mamiya Recoil F3 Shaft:touredge: Exotics EX9 28 deg Hybrid w UST Mamiya Recoil F3  shaft, / Bobby Jones Black 22 deg Hybrid:touredge: Exotics EXi 6 -PW  w UST Mamiya Recoil F2 Shaft, SW (56),GW (52),LW (60):touredge:  TGS),/ ODDYSEE Metal-X #7 customized putter (400G, cut down Mid Belly)

Link to comment
Share on other sites

Awards, Achievements, and Accolades

This vid has a slow motion

And for the record i do have trouble getting the club square at impact especially with longer clubs. its horrible with driver. Always slice to out of bounds or holes fairway

Link to comment
Share on other sites


It looks like you're swinging a LOT from the outside and in, producing a slice. Look at where your feet, hips and shoulders are aimed and the path your club takes. Not sure where you are aiming. It seems like your shoulders are pointed way left of where your feet are. I'd work on my setup first, squaring the clubface towards the target first and then getting parallel with feet and shoulders. That's a good first step!

Link to comment
Share on other sites


Coming from outside to in on downswing right?

I was trying to aim the direction the ball flew but yea it looks my feet are aiming way right, like my right foot is far back and my shoulders more left. Could that be causing that out to in swing path?

Link to comment
Share on other sites


Yes, it looks like you're coming from the outside and in on the downswing. There are a lot of things that could cause it. I've been working on my own over-the-top swing for a bit, so I'm probably not the guy to ask! It also kind of looks like you're trying to "lift" the ball with a very steep follow-trough. Try working on hitting down on the ball, and getting that swing to be less from the outside in. There are a lot of great resources on this forum, check out the videos on "five simple keys"!

Link to comment
Share on other sites


Note: This thread is 3954 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • When I lived in Oregon my friend had a rule. It could only be 2 of the following 3 items for us to play. If all 3 we’d skip.    1. Windy (20+) 2. Rainy (needs to be steady, rain in Oregon is pretty common) 3. Cold (less than a high of 50) This was a pretty solid rule.    
    • Day 74: Worked on priority piece, full swing for about an hour this evening after dinner. Really need to exaggerate “hitting to right field feel” more than I think to produce slight push draw ball flight. 
    • Day 170 - Got some good work in on the short game, as well as more work on my priority piece. 
    • I searched around but didn’t see any other threads on this so I’ll put it here. I work in the laser industry and one of the applications has been additive manufacturing. The main market for the past 10 years has been SpaceX and the space industry and some medical applications. The new one I saw this week is 3D printing irons. Cobra and the company that they are using is marketing these irons pretty aggressively.  In talking with the folks in the booth at the trade show, the claim is that they can gain strength but reduce the weight to put it exactly where they want. The print of the iron is very cool. Mostly everything behind the face is a thin metal lattice and then in the heal and toe is a block of tungsten for weight.  I am old enough to remember the arguments about forged versus cast irons. I wonder if folks here will pay a bit more to get 3D printed irons.  They have a booth here where you can hit them but I hate lines and the line to do it is always long. I go again tomorrow, and if the line isn’t too long I’ll give it a try and report back.    Here are some pictures (I had some trouble uploading, I’ll try later)      
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...