Inazone Spin Wedges

[toomanymatts]

hi guys

This is kind of a masked 'WTB' - seems forum noobs like me are not allowed to post in the market - but it's a wedge question.  I played a loaner-set of these Inazone Spin Vokey clones on Hi Rev FST shafts recently, loved them, decided 'Imma make me a set the same'.

Not so fast there bucko...discontinued.

Diamond Tour has leftover LH in all lofts, but only 52/60 (no 56) in Raw in RH. No joy there.

Saved search on ebay hasn't yielded much so far - couple of guys with beat up 56s, nothing in good condition.

Emailed a bunch of googled shops and generally had no replies or 'oh yeah, I should pull that product off my page' type replies. Still no joy.

So, in the hope that some of you guys are club makers with some old inventory on the shelves, or hobbyists from the project they never got around to doing, does anyone have a set of these (or even a raw 56 and I will buy the others direct from DTG)? In an ideal world, I'd get the oil soak color, but beggars can't be choosers I guess.

Alternately, are either of the replacement models from DTG similar to the departed?  Anyone played them? Thoughts or feedback?

Thanks in advance

Matt

Edited November 1, 2015 by toomanymatts

[WUTiger]

You might look at some of the current-production component heads, and find a model with a similar look. You might start with Hireko Golf.

Or, you could always get the Inazone 52 and 60 heads and two HiRevs, and pick up a used Vokey 56* with a Hi-Rev shaft.

HiRev shafts will cost about $30 each. Also, be aware that HiRevs are taper tip only (0.355" tip).

[toomanymatts]

Yeah, the forged Dynacrafts from Hireko are what I am likely to end up with, but thought a roll of this dice would be worthwhile before I pull the trigger on those. 

Incidentally KBS Hi Revs are around $30, the FST only about $6 though.

Edited November 5, 2015 by toomanymatts