Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6279 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

I bought my first VOKEY wedge today and I was wondering a few things. First, I noticed that on the logo on the club that there are the initials BV, do these stand for a mans name?
Second, I love the looks of the oil-can finish, however is there a reason for it as opposed to the chrome finish?
I am trying to update my wedges and plan on getting 1 at a time. I got the 60* degree to start with, because I use my LOB-WEDGE alot. It is my go to club very often.

In My Limited Edition "Sir Isaac Newton Caricature" Big Bertha Tour Bag:
Driver: Big Bertha Fusion Ft-3
Hybrid: Big Bertha Heavenwood 3h
Irons And Wedges: Big Bertha X-12 3-Sw And
60* Vokey Spin Milled Oil-Can Lob-WedgePutter: White Hot Xg Sabertooth and a Futura Phantom Balls: Hx Hot Bite...


Posted
BV stands for Bob Vokey, the man that designs these wedges. And the Oil Can finish will rust over a period of time, or you can put the head in some Coke and it will strip the finish off and leave a raw wedge.

Here's what I play:

Titleist 907 D2 10.5* UST ProForce V2 76-S | Titleist 906F4 18.5* Aldila VS Proto "By You" 80-S | Titleist 585H 21* Aldila VS Proto "By You" 80-S | Titleist ZB 4-PW TTDG S300 | Bob Vokey Spin Milled Oil Can 54.10 | Bob Vokey Spin Milled Oil Can 60.08 | Scotty Cameron Red X5 33" |


Posted
Many like the look of the oil can and satin finishes because the reflection that chrome gives off at address. The oil can wears down rather quickly and gives a nice rust look to it. There are two kinds of Vokey wedges spin milled and regular. Although the grooves are the same, the spin milled seem to have more durability to some and spin a little more to some as well. The spin milled wedges are available down to 54 degree IIRC.

Posted
Many like the look of the oil can and satin finishes because the reflection that chrome gives off at address. The oil can wears down rather quickly and gives a nice rust look to it. There are two kinds of Vokey wedges spin milled and regular.

Err... No, the spin milled is named for the special way the grooves are milled, I think.
Whats in the bag:

Driver: Nike Ignite 460cc 10.5* Fujikura Ignite reg flex
Fairway woods: Howson tour master power series 3,5 woods
Irons: MacGregor M675 3-PW DG S300 Wedges: Mizuno MP-R Black Nickel 54.10, 60.05Putter: Pinfire Golf P4Ball: Titleist NXT TourHome Course:http://www.golfarmagh.co.uk/...

Posted
Actually that is incorrect. It is named for the way the face is done, not the grooves. Thanks

No I'm afraid you are the one who is incorrect. Its named for the grooves.

Thanks ;)
Whats in the bag:

Driver: Nike Ignite 460cc 10.5* Fujikura Ignite reg flex
Fairway woods: Howson tour master power series 3,5 woods
Irons: MacGregor M675 3-PW DG S300 Wedges: Mizuno MP-R Black Nickel 54.10, 60.05Putter: Pinfire Golf P4Ball: Titleist NXT TourHome Course:http://www.golfarmagh.co.uk/...

Posted
According to the website apparently we are both correct. It is named for the way the face and grooves are cut. What do you know.

here is the quote "Vokey Spin Milled wedges feature a CNC machine cut face and grooves"

  • Administrator
Posted
Actually that is incorrect. It is named for the way the face is done, not the grooves. Thanks

Not correct (nor is your revised statement). For what I hope is the final time, the "spin milled" refers to the way the grooves are cut only.

The rough face isn't the "spin milled" part. The face shows mill marks, but it's a different procedure: it's not the "spin milled" process. Bob Vokey says so, as does everyone else I've ever talked to at Titleist about this. P.S. And since you keep editing your post, I'll now add that "CNC milling" is the broad term for all sorts of milling, but "spin milling" is a subset of that. The grooves are "spin milled," which is a form of CNC milling, but the face uses a standard, non-"spin milled" version of CNC milling.

Erik J. Barzeski —  I knock a ball. It goes in a gopher hole. 🏌🏼‍♂️
Director of Instruction Golf Evolution • Owner, The Sand Trap .com • AuthorLowest Score Wins
Golf Digest "Best Young Teachers in America" 2016-17 & "Best in State" 2017-20 • WNY Section PGA Teacher of the Year 2019 :edel: :true_linkswear:

Check Out: New Topics | TST Blog | Golf Terms | Instructional Content | Analyzr | LSW | Instructional Droplets

Awards, Achievements, and Accolades

Posted

I played the VOKEY for the first time today, and it is awesome. I wan't able to get the ball to back up, however I did make the ball stop on a dime a few times. I like the control landing on the greens.

In My Limited Edition "Sir Isaac Newton Caricature" Big Bertha Tour Bag:
Driver: Big Bertha Fusion Ft-3
Hybrid: Big Bertha Heavenwood 3h
Irons And Wedges: Big Bertha X-12 3-Sw And
60* Vokey Spin Milled Oil-Can Lob-WedgePutter: White Hot Xg Sabertooth and a Futura Phantom Balls: Hx Hot Bite...


  • 4 weeks later...
Posted
i bought a vokey a few days ago, and i took it out today, i honestly didnt see anything different from my goldenbear wedges i got on clearance haha

i was taking out nice divots like infront of the ball like ive heard i was def hitting the ball then ground like ive read online, i was using a prov1x ball and i didnt notice anything different

but im not giving up yet, im gonna keep trying em out and get used to them

another thing the look of a raw vokey is freakin awesome, the oilcan finish looked like CRAP after my first round with it, so i took it home did the coke thing and it looks so much better

r7 draw driver 9.5* stiff shaft
Big bertha 06 irons, 4-sw
56*vokey spin milled 10*bounce
Victoria ;)
tp black balls cart bagJack nicklaus Golden Bear 52* and 60* wedgesWalter hagen: 3 wood 5 wood 4 hybrid stiff shaft"I don't say my golf game is bad, but if I grew tomatoes they'd come up sliced."www...


Note: This thread is 6279 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.