Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6275 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

I got a little bored yesterday and decided to get some acetone and Tester's Paints after work. My irons had some chipped paints, and needed a little touch-up. I could have gone with the original paint design… but I wanted a little extra touch. I decided to fill in the logos red, and filled in the numbers black like normal. It actually turned out quite well! It's my first time doing this, so I was very excited to see my irons pop-up. Anyone else customize their irons?

Here were my steps:

1. Washed my irons with water and soap, made sure I got out all of the dirt and grass.
2. Soaked the iron heads in acetone. Probably around 30 minutes or so.
3. Brushed out all of the paints, if the paint was stubborn, picked it out with a toothpick.
4. Painted in the logos with Tester's Paint. I didn't worry too much about going over the lines, that wasn't a problem at all.
5. Allowed to semi-dry, in about 45 minutes.
6. Used a rag and dip in acetone, wiped away the excess paints gently since it was only semi-dry.
7. Let dry over night.

$s
1. Acetone: $4.
2. Paints: $1.50 x 2.
3. Total: $7 for 8 irons.

Driver:  R11S 10.5°, Fairway Woods:  909 F2 15.5°, Hybrid:  G10 21°

Irons:  Tour Preferred MC 4-P, Wedges:  Vokey SM 52.08, 56.10, 60.04

Putter:  Tei3 Newport II / Circa 62 #3, Ball:  Pro V1X / NXT Tour


Posted
Nice job... I've been thinking of doing mine in the same color. Is that just the regular Testers red?

13 Wedges
1 Putter


Posted
Yep, there's also a glossy kind, but I'm not sure how that would look so I went with regular.

Driver:  R11S 10.5°, Fairway Woods:  909 F2 15.5°, Hybrid:  G10 21°

Irons:  Tour Preferred MC 4-P, Wedges:  Vokey SM 52.08, 56.10, 60.04

Putter:  Tei3 Newport II / Circa 62 #3, Ball:  Pro V1X / NXT Tour


Posted
I've also been thinking about doing redoing the paintfill on my 735's and my vokeys. Instead of using the classic red, I'm considering using the clear red paint (like on the studio select putters). I think it would look nice with the chrome! I'll post some pics if I ever decide to do it!

What I Play!

x86 Stand Bag
Driver: 907D2 10.5* w/EPIC-S
Irons: 735.CM irons 4-PW PX 5.5FW Wood: 909F2 15.5* Aldila Voodoo SHybrid: 909.H 21* Diamana Blue Board SWedges: Vokey 250.08 (oil can), Spin Milled 54.11 & 60.07 (Black Ni)Studio Select 2.5Ball: Pro-V1x/Bridgestone B330s (or anything I...


Posted
Looks great! I was thinking of doing something like this with my MP-33's during the winter. Is acetone pretty much paint thinner? Does it do anything to the chrome finish?

- Tour Issue Taylormade R7 Superquad TP Matrix Ozik Xcon 5 X-stiff
- Nike Dymo 3 Wood UST Axivcore Stiff
- Nike Dymo 5 Wood UST Axivcore Stiff- Nike Blades 3-PW S300- Nike SV Tour 50* 54* 58* S400- Titleist Scotty Cameron Newport Beach- Nike Tour D


Posted
Looks great! I was thinking of doing something like this with my MP-33's during the winter. Is acetone pretty much paint thinner? Does it do anything to the chrome finish?

Yeah, acetone is a type of paint thinner, however to be safe to chrome, I'd use 100% acetone.

Driver:  R11S 10.5°, Fairway Woods:  909 F2 15.5°, Hybrid:  G10 21°

Irons:  Tour Preferred MC 4-P, Wedges:  Vokey SM 52.08, 56.10, 60.04

Putter:  Tei3 Newport II / Circa 62 #3, Ball:  Pro V1X / NXT Tour


Posted
Sweet. Thanks a lot.

- Tour Issue Taylormade R7 Superquad TP Matrix Ozik Xcon 5 X-stiff
- Nike Dymo 3 Wood UST Axivcore Stiff
- Nike Dymo 5 Wood UST Axivcore Stiff- Nike Blades 3-PW S300- Nike SV Tour 50* 54* 58* S400- Titleist Scotty Cameron Newport Beach- Nike Tour D


Posted
Yeah, acetone is a type of paint thinner, however to be safe to chrome, I'd use 100% acetone.

I'm always changing my putter and wedge color schemes...

check this out

Daniel Duarte
905R UST Proforce V2 76g 44" S
904F 15, Graphite Design YS6+
MD Hybrid, 19 Degree, UST V2 Hybrid S
Pro M Gunmetal 5-PW, Nippon 1150GH Pro SVokey Oil Can 52 - RAWVokey Spin Milled Oil Can 56, 60 - RAWTEI3 Newport II - Torch Copper- Prov1x


Posted

That paintjob looks really sweet. Thanks for posting it!

My MP-67s come in next week, and this is a fantastic idea to give it a little personal touch. I may be going to the hobby store soon.

Driver: 909 D3 10.5 degree Aldila Voodoo S Shaft
3 Wood: MP 001
Irons: MP-67 3-PW
Wedges: 52, 56, 60
Putter: Karsten B60


Note: This thread is 6275 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.