Jump to content
Check out the Spin Axis Podcast! ×
IGNORED

How Expensive is it to re-shaft a hybrid????/


Note: This thread is 6135 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Hi all, I have an opportuinity to get a pretty good price on a new Cobra DWS hybrid, but is stiff, which does not fit me. I was wondering how much would it cost to take it say to Golf galaxy or golfsmith to change the shaft???

Your input, as always is appreciated!
It's the indian, not the arrow! But it sure is nice to have good arrows!!!!!

Driver : r7 Limited 9.5* Matrix Ozik X-Con 5.5 (Reg) | Fairway: 906F4 15.5* (Reg) | Hybrids: DWS Baffler 3/R 20* (Reg) & Baffler Rail H 4-H 22* (Reg) | Irons: AP1 5-G (Reg) | Wedges: SW - SM56-10 & LW - SM60-04 | Putter:.....

Posted
Depends on if you are going steel or graphite. I reshafted steel hybrid a few yrs back, and it was about $40 for a plain old steel shaft and a new grip and labor at Golf Galaxy.
A grafite shaft could set you back a lot more depending how fancy you want to go.

Here's a link for club making at a couple top retailers.
Should be able to get a feel for pricing.

http://www.golfgalaxy.com/galaxy/dep...0&dept;_id=5117

http://www.golfsmith.com/cm/browse.php?N=392203

Driver: X460 tour- 9.5*
3-wood: 3+ - 13*
Hybrid: BB HW 20*
Hybrid: 24*
Irons: X-20 Uniflex SteelWedges: Colonial 56* & 60*Putter: XG SabertoothBall: GPS-8âIf you are caught on a golf course during a storm and are afraid of lightning, hold up a 1-iron. Not even God...


Posted
it really also depends on the type of shaft that you want to put in. I ADORE graphite design shafts in my hybrid. I've gone thru 2 of them to get my desired ball flight.

can I ask why you're going to reshaft? like what do you want out of the club at the end of the day? how do you hit your long clubs now? high? too high? medium launch? on a regular full swing.

then you can decide what kind of shaft to put in after you try out the shaft that's inside the club now.
DJ Yoshi
Official DJ: Rutgers Football
Boost Mobile Tour
In My Bag
HiBoreXL 9.5 White Board D63 Stiff Exotics CB2 5 Wood, Exotics CB3 3 Wood MP-60 5.5 Flighted Shafts 54 & Cleveland CG-10 60 Newport 2

Posted
a new steel shaft retails for about $5-12 depending on what you get. The grip will be about $3-14 depending on what you get so most of the cost is in labor. Graphite shaft will be a bit more expensive but not a ton.

Driver: 905r 10.5
3 - Wood: 15degree
hybrid: heavenwood 20 degree
Irons: MP - 32 3-PW
Wedges: Vokey 54 and 60Putter: Anser 2 Belly


Posted
Thanks guys!

I was trying to bid on a new Cobra DWS 1/R, but it was stiff. It ended up selling for $61 on ebay. It was going for 35 when i setup the post..
It's the indian, not the arrow! But it sure is nice to have good arrows!!!!!

Driver : r7 Limited 9.5* Matrix Ozik X-Con 5.5 (Reg) | Fairway: 906F4 15.5* (Reg) | Hybrids: DWS Baffler 3/R 20* (Reg) & Baffler Rail H 4-H 22* (Reg) | Irons: AP1 5-G (Reg) | Wedges: SW - SM56-10 & LW - SM60-04 | Putter:.....

Posted
Thanks guys!

you can get a tour edge exotics on ebay for $80. the cb2. most sellers will let you choose the shaft if they're golf shops.... for cobra.. i hear nothing but great things about the baffler. but i'm a tour edge guy

DJ Yoshi
Official DJ: Rutgers Football
Boost Mobile Tour
In My Bag
HiBoreXL 9.5 White Board D63 Stiff Exotics CB2 5 Wood, Exotics CB3 3 Wood MP-60 5.5 Flighted Shafts 54 & Cleveland CG-10 60 Newport 2

Posted
.... for cobra.. i hear nothing but great things about the baffler. but i'm a tour edge guy

Bafflers are riddiculously esy to hit....I was blown away. I'm not that consitent with my 3h, but with the Cobras I was hitting, as if it were an extension of my arm. the word "Butter" comes to mind!

It's the indian, not the arrow! But it sure is nice to have good arrows!!!!!

Driver : r7 Limited 9.5* Matrix Ozik X-Con 5.5 (Reg) | Fairway: 906F4 15.5* (Reg) | Hybrids: DWS Baffler 3/R 20* (Reg) & Baffler Rail H 4-H 22* (Reg) | Irons: AP1 5-G (Reg) | Wedges: SW - SM56-10 & LW - SM60-04 | Putter:.....

Note: This thread is 6135 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 9: 2026.01.11 Hit some balls at the range, concentrating on weight distribution at address, got some on film.
    • Day 468 - 2026-01-11 Loooooong day. Did some work in the patio door (as a mirror) when I got home.
    • I caught a video on this driver; the face tech seems crazy. Looking at the heat map for ball speed, hitting it basically anywhere on the face only loses a few percent ball speed. The surprising and counter intuitive part to me was that for flat faced clubs, ball speed loss is directly proportional to distance loss. For clubs with bulge and roll this is apparently not true. The surprising part of that story being that the max distance potential looks to be a tiny pee sized area for this driver, and I feel in general for drivers. The counter intuitive part being (the myth?) that blade irons have a pee sized sweet spot and missing that tiny spot causes dramatic losses. And that modern drivers, maybe 2017 on, have massive sweet spots and are ultra forgiving. Where in reality, if this heat map data is valid and reliable, it might be a bit of the opposite. This insane tech driver appears to have a pea sized "sweet spot" while Mizuno Pro 241 irons are 28% more forgiving compared to the average of all clubs measured. Not compared to other players irons, compared to all clubs from all categories, players to SGI! The Pro 241 being essentially just a solid chunk of metal with no "tech" at all. Which for me devolves into a whole mess of what is forgiveness really? And in measurable and quantifiable results how many yards, or feet, does that translate into?  
    • Wordle 1,667 3/6 🟨🟨⬜⬜⬜ ⬜⬜⬜🟨⬜ 🟩🟩🟩🟩🟩
    • Wordle 1,667 3/6 ⬜⬜🟩⬜⬜ ⬜🟨🟩⬜🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.