Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6022 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
So recently I have moved from the stock regular flex shaft in my Taylormade R7 Superquad driver to a stiffer Aldila shaft. However my driver has a loft of 10.5 and I am getting incredibly high ball flight, something that I really am not enjoying. So I have been wondering if it is possible to buy a new driver head but keep the shaft, since I just bought it and all..

Also I am interested in the Titleist 909 series, but I am afraid that they may be a little too advanced for me. My other option would be the Taylormade R9, but that seems to be a far more expensive option at the time.

I would like a little more distance out of my driver and I would love it if someone with experience with the 909 series could help explain the differences between the 3 clubs.

Superquad 10.5* Aldila Shaft (the green one)
R9 3-Wood 15* Stiff
Ignite 3H
MP-52 PW-4
Vokey Tour Wedge 52,56,60 Newport Studio 2


Posted
I have never hit a TaylorMade Driver. No shops around here sell TM, but I can tell you the 909D2 is spectacular. I have a 10* and I get a consistent, penetrating ballflight (on the good hits of course, im not kidding myself, lol), and long drives with a slight draw, but not even enough of one to worry about having to play off it all the time.

I went through three drivers before I found this one, A Nike Sumo2 5900, Ping Rapture, and this, I would never go back.

In the Ogio Kingpin bag:

Titleist 913 D2 9.5* w/ UST Mamiya ATTAS 3 80 w/ Harrison Shotmaker & Billy Bobs afternarket Hosel Adaptor (get this if you don't have it for your 913)
Wilson Staff Ci-11 4-GW (4I is out of the bag for a hybrid, PW and up were replaced by Edel Wedges)
TaylorMade RBZ 5 & 3 Fairway Woods

Cobra Baffler T-Rail 3 & 4 Hybrids

Edel Forged 48, 52, 56, 60, and 64* wedges (different wedges for different courses)

Seemore Si-4 Black Nickel Putter


Posted
Not to be rude, because we have similar handicaps, but you dont feel that the club is too difficult to hit solidly? I have heard it is for single-digit handicaps and I dont want to make this game any harder than it is, but if there is any chance it could help my game I would be very interested in checking it out.

Superquad 10.5* Aldila Shaft (the green one)
R9 3-Wood 15* Stiff
Ignite 3H
MP-52 PW-4
Vokey Tour Wedge 52,56,60 Newport Studio 2


Posted
Not to be a troll but anyone else ahve any input?

Superquad 10.5* Aldila Shaft (the green one)
R9 3-Wood 15* Stiff
Ignite 3H
MP-52 PW-4
Vokey Tour Wedge 52,56,60 Newport Studio 2


Posted
to answer your question, yes you can buy a new head and use the old shaft... it is possible.
Bag: Flight SS
Driver: 10.5* r5 draw with Pro Launch blue 65 Stiff
Irons: CCi Forged 3i-pw
Wedges: 56* CG12 black pearl and 60* low bounce RTG 900
Putter: i-Series Anser 35"Ball: e5+Tee: Zero FrictionGlove: FootJoy WeatherSofRangefinder: MedalistShoes: Sp-6 II, Adidas 360Scores this year:92 91...

Posted
So I have been wondering if it is possible to buy a new driver head but keep the shaft, since I just bought it and all...

Manufacturer's club heads (components) are not available to the public; i.e. you cannot buy a TM head or a Titelist head, etc.

There are other, reputable component manufacturer's out there that sell quality component parts: Golfsmith, Golfworks, Tom Wishon, Heriko (Dynacraft). I buy my Snake Eyes components from Golfsmith and have built many Dynacraft, Golfworks and Wishon clubs for friends, family and others.
I make all my own clubs:
Driver: Snake Eyes Python XLD | | 3-Wood: Snake Eyes Python XL Faiway, 15*  | | Snake Eyes HT Iron Set, 3-, 4-Utility, 5-, 6-Hybrid, 7-PW Cavity Back | | Golfsmith G-40 Wedges, 52, 56, 60 | | Distance Master DM-AS2 Putter | |Ball? The last one I found ... that... was YOURS!!

Note: This thread is 6022 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.