Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5998 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
In the new issue of Golf Digest (w\ Arnie on the cover) there was a half page post briefly describing and showing some new irons being released. One of the irons mentioned was the "Cleveland CG7 BP" with milled face and Zip grooves. It showed a 5 iron with the Black Pearl finish. Anyone have any additional info on these? A Google search turned up nothing but a small post on another forum asking the same question.

ps..any benefit or detriment to having the Zip Grooves on a full iron set?

Dymo2 str8-Fit 10.5 driver & Dymo2 3 wood
#3 & #4 Machspeed Hybrids
5-PW i701 irons
52 & 58 XFT Wedges
White Ice 2-Ball CS Putter One Vapor Sidekick push cartSonocaddie Auto Play GPS


Posted
I don't really see a benefit to having zip grooves on every iron because I generally don't want a ton of spin on my 5 iron. Plus you'd never get more than 1 round of a ball.
Driver: i15, 3 wood: G10, Hybrid: Nickent 4dx, Irons: Ping s57, Wedges: Mizuno MPT 52, 56, 60, Putter: XG #9 

Posted
Plus you'd never get more than 1 round of a ball.

Good point!! I have a wedge with Zip Grooves and after every full shot I have to scrape out pieces of the ball from the grooves.

Dymo2 str8-Fit 10.5 driver & Dymo2 3 wood
#3 & #4 Machspeed Hybrids
5-PW i701 irons
52 & 58 XFT Wedges
White Ice 2-Ball CS Putter One Vapor Sidekick push cartSonocaddie Auto Play GPS


Posted
I don't have a problem scuffing balls with my black pearl wedge. However, it has developed a hot spot in the center where the blackening has kind of worn off. I don't mind that on a wedge which usually gets beat up looking anyways but it would bother me to see that on every single iron in my bag.

In a staff blue  Aerolite III

Razr Hawk 10.5* (BB 63 S)
Orig Steelhead 4W 16.8* (F)
Orig Steelhead 7W 20* (M-10)

 JPX-800 Pro 4-pw (XP S300)

 MP-T Blk Ni 51.06, MP-T Blk Ni 56.14, MP-T Blk Ni 58.10

  Bettinardi BC-1 (34")

TM TP Black


Note: This thread is 5998 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • For someone with a very consistent swing speed and ball strike, upgrades may improve performance. For everyday golfers, probably not. I'm a rather odd player. I usually get best performance from basic pro or tour heads, but with lighter stock shaft from the model's standard driver set up. (Yes, current EXS is an exception.) When I get a full driver fitting, I usually try a couple of modest upgrade  (not super magic) shafts. Most of the time upgrade gives a couple of extra yards, or 10 yards less. Remember this about stock shafts: They are matched to a particular driver model to fit the type of player likely to adopt that model. Also, most OEMs offer a variety of stock shafts in their drivers. Test for which one works best. And, the final decider...  
    • Uh, seeing you're having trouble with hit-and-miss performance from inherited clubs... Get Fitted! IF the 910H pair don't work, swap them out. Also, only two degrees separation in loft is not much. You might consider a 4W (much more reliable than a 3W) plus hybrid. This would give more distance separation than two Hs. For hybrid, get one you can hit... Maybe a more benevolent 4H. Quite often I try to brand match my bridge clubs (FWs and Hs), and my irons and wedges... but not always. Whatever works!
    • Like others have said, get fitted. Since 2011, I have played some combination of 4W + 7W. I had a Cobra 3H and 4H a couple of years back, and would swap out the 7W for a 3H in cold months (keep out of cold wind, and rough thinner for wayward drives.) The 7W matched up with yardage often with 3H; the current 4H goes almost as long as 7W, but has a lower trajectory. 4H also bumped out 4i in last bag redo; I learned to hit stinger with 4H so that's my driving iron on tight holes with shallow landing area. Again, a side-by-side test will tell you which way to go. If 5W or 3H is meh, keep the 7W. Also, are you looking to replace the 7W with a 5W or 3H, or add a second bridge club (5W or 3H) to your bag?
    • Makes sense and aligns with other literature. Static stretching, especially for longer durations, can impede performance in strength and power activities. I would not want to do like hamstring, quad, and calf stretches then go immediately sprint. To me that sounds like a terrible Idea. I would rather start off walking, then jogging, then running, then ramp up to sprinting.  To me, static stretching isn't even a warmup activity. I like the term warmup; you want to get some exertion going before the activity.      a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; }
    • Going to Florida for the usual February golf trip, and with our current weather, that date won't get here soon enough. Heading to Augusta GA for the Tuesday Master's practice round, will definitely get some golf in while I'm in the area for a few days. Hope to be able to catch up with @coachjimsc if he's around. Then it's back to Scotland first of July.  Playing 7 new courses, can't wait for that.  Then somewhere after that is the Rhode Island CC Member-Guest and then my normal October golf trip to Myrtle Beach.  
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.