Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5866 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Looking at the maltby playability factor numbers, the AP1 is 765 and the Nike CCi cast iron is 579.

Are the AP1's that much easier to play than the cci cast? I thought the cci cast were more G.I. than this...

The 57's I have now are only 411.

Oh and on a side not, do the G10 irons have like rediculously big soles? I cant remember if they did or not. The raptures have gigantic soles and just wondering if the g10's do as well.

Thanks a million!

Jim

In my Ogio Blade Stand Bag:
 

TaylorMade Burner 10.5*

Adams Insight BUL 15*
Taylormade RBZ 3H

TaylorMade RBZ 4-AW

Vokey SM4 54-11

Cleveland CG14 58 2 dot wedge

Ping Karsten Series Craz-E putter

Top Flite Gamer


Posted
Looking at the maltby playability factor numbers, the AP1 is 765 and the Nike CCi cast iron is 579.

The G10 have huge soles and I can't stand looking at them. They just look like shovels. Even the i10 look to chunky for me.

Just out of curiosity, are you looking to switch irons or something like that?

Posted
The G10 have huge soles and I can't stand looking at them. They just look like shovels. Even the i10 look to chunky for me.

I don't call the soles HUGE.

G15's have huge soles. I like the G10's Give them a go.

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Posted

Actually yea, I dont know why I decided to make the game harder on myself

I want to go to a GI iron and get my HC down into the low single digits before I attempt these players irons again.

Just being humble and honest with myself. Borrowed my dads CCI cast irons just to make sure and I scored a lot better but even those arent really a true GI iron... Back into the mid 80's without leaving myself with treacherous up/down situations.

I just dont know which irons to get, hitting them into a net really doesnt help me at all so Im just gonna pick one and go with it.

So the g10's have huge soles huh, does that affect playability? How bout those ap1's or cci cast? anyone else?

Thanks Andef!

Jim

In my Ogio Blade Stand Bag:
 

TaylorMade Burner 10.5*

Adams Insight BUL 15*
Taylormade RBZ 3H

TaylorMade RBZ 4-AW

Vokey SM4 54-11

Cleveland CG14 58 2 dot wedge

Ping Karsten Series Craz-E putter

Top Flite Gamer


Posted
Actually yea, I dont know why I decided to make the game harder on myself

Big soles won't affect playabliaty.

Well I doubt it since those G10's have gotten great reviews. Read a few reviews. here's one for the AP1 http://thesandtrap.com/clubs/titleist_ap1_irons_review Don't buy anything until your happy with what your getting

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Posted
Yea ive seen the g15 soles, so they are not like that?

Can you compare the sole of the g10 to the TM burner irons, I have a 6 iron (burner) here at the house so I'd be able to compare.

Thanks man!

How bout the other irons I wrote about?

Jim

In my Ogio Blade Stand Bag:
 

TaylorMade Burner 10.5*

Adams Insight BUL 15*
Taylormade RBZ 3H

TaylorMade RBZ 4-AW

Vokey SM4 54-11

Cleveland CG14 58 2 dot wedge

Ping Karsten Series Craz-E putter

Top Flite Gamer


Posted
Yea ive seen the g15 soles, so they are not like that?

Well I posted a pic of a g10 a few posts back.

Looks similar If you've got a problem with big soles well the nike's would be pushing it a bit here's a review http://thesandtrap.com/clubs/nike_cci_cast_irons_review and here's a pic

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Posted
I have my dads cci's in my bag right now, those soles are not big at all. The burner's soles are bigger....

Just wondering if the g10 soles are comparable to the burner, and it seems like it is.....

any comparison for g10 to the cci cast??

MPF says the g10 is much easier to play...??

Thanks!

Jim

In my Ogio Blade Stand Bag:
 

TaylorMade Burner 10.5*

Adams Insight BUL 15*
Taylormade RBZ 3H

TaylorMade RBZ 4-AW

Vokey SM4 54-11

Cleveland CG14 58 2 dot wedge

Ping Karsten Series Craz-E putter

Top Flite Gamer


Posted
I think you are putting too much stock in the size of the soles. Go hit a bunch and pick the one that works.

Posted
I think you are putting too much stock in the size of the soles. Go hit a bunch and pick the one that works.

Yep-clubs are clubs. There are numerous factors that determine whether or not you like hitting a certain club. I would take actually hitting the irons over MPF 100 times out of 100.


Posted
you think hitting into a net would tell me anything though?

Jim

In my Ogio Blade Stand Bag:
 

TaylorMade Burner 10.5*

Adams Insight BUL 15*
Taylormade RBZ 3H

TaylorMade RBZ 4-AW

Vokey SM4 54-11

Cleveland CG14 58 2 dot wedge

Ping Karsten Series Craz-E putter

Top Flite Gamer


Posted
The soles help to not dig in the green and provide a MOI that is moved a bit away from the face. I personally love the G10s but you should definitely try a bunch out and see what works best for your game.

Driver: Taylor Made Burner 10.5 Reg shaft
FW: Taylor Made 3 Wood
Hybrid: Taylor Made 3
Irons: Ping G10
Putter: Odyssey TourSite: http://thegolfstudent.com


Posted
i hit the ap1 a few months back and they're really nice clubs. very forgiving, long and launch very high. they don't look to big at address but i liked the ap2s better so i went with those. you can also hit some draws and fades with them. the main reason i went with the ap2 (apart from looks and playability) is because i was hitting a draw with the AP1s and the AP2s flew dead straight. I don't like too much offset in my irons but that same offset makes clubs like the G10, Ap1 and CCi easier to hit.

Posted
I have my dads cci's in my bag right now, those soles are not big at all. The burner's soles are bigger....

Look at the pictures and decided for yourself.

Big soles help. Mightn't look great but they help give a higher launch and help stop you hitting fat shots.

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Posted
On a side note, James, I love the avatar!

Jim

In my Ogio Blade Stand Bag:
 

TaylorMade Burner 10.5*

Adams Insight BUL 15*
Taylormade RBZ 3H

TaylorMade RBZ 4-AW

Vokey SM4 54-11

Cleveland CG14 58 2 dot wedge

Ping Karsten Series Craz-E putter

Top Flite Gamer


Note: This thread is 5866 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.