Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5882 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Hit demo day today at the range. Hit every iron they had. Was ready to buy, money in hand. Came home with nothing.

Here was the problem. I started hitting and slowly warmed up, but went thru a lot of balls. Suddenly my swing started clicking and I hit about 10 great shots with the X-22. I switched to the X-22 Tour and continued to hit beautiful 6-iron shots. Switched again to the Diablo forged and was still hitting them well.

I suddenly hit the wall. Arms a little tired, the clubs started to get away from me. I took a break, but came back with inconsistent hits. I had nothing left to go back and try to determine which clubs I liked better. Hung around while my buddy crushed the different drivers and then left.

They are back in about a month. I think next time I'll go and just grab those 3 clubs and hit 4 balls each club round robbin until I decide what I like. To be honest, they all felt great, although I do like the looks of the Tour and Diablo better, and the forged does feel sweet.

CARBITE Putter


Posted
Cally did their homework. They have put out some really good stuff this year. I think that the Diablo Edge line really stands out.

Posted
There is going to be a demo day at the end of April and I am really interested in the X-22 sets. I'm just afraid of stepping up and shanking everything. I've never gone to a demo day, I've always hit at places like Golfsmith. How was the experience? Also, do they do swing analysis and custom fitting that day?

Callaway Org14 Sport w/ Clicgear Cart:

Callaway X 460 9* - Callaway X 15* - TaylorMade 19*/21* Hybrid - Callaway Diablo Forged 4-PW - Titleist 50/56/60 - Rife Cayman Brac - Bridgestone xFIXx/B330-RX - TRUE Linkswear Supporter!


Posted
It was my first demo day and I was a little anxious as well. But no reason to be. They had 3 or 4 guys there working about 8 stations. Lots of people, lots of clubs. Got to the point where we were just grabbing a guy, saying hey get me an X-22 tour 8 iron, and then going and hitting balls. Very lax for sure. Go with a friend, makes it more fun. And for the shanks, always remember there will usually be someone better than you and someone much, much worse. :)

They had one station with the launch monitor, but using it mostly for drivers. They were set up for the full swing analysis and ready to fit anyone who was buying.

The range I went to has a demo day every Saturday. I may just make that one of my practice days, and hit balls for free while 'shopping' for clubs.

CARBITE Putter


Note: This thread is 5882 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Carl's Place
    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 254 5-4 Arms off chest in backswing and downswing. Short swing, pause and then hit.  Hit foam balls. Keeping arching of wrist a focus as well. 
    • I would think of it in terms of time. The time it takes to get the arm angle into a good position to deliver the club with proper shaft lean. Another component is rotation, but that is also a matter of timing. It relates to how the body stalls to give the golfer time to hit the ball. If you have to get 80+ degrees out of that right elbow in one third of a second versus 50 degrees in the same time then you have to steal time from somewhere. It is usually body rotation. That does not help with shaft lean.  I agree in that amateurs tend to make the swing more complicated than pro golfers. 
    • I haven't been able to practice like I wanted and won't for the next week.  1. The weather sucks in Ohio this year. I have been mostly inside hitting foam balls. Just kind of my basic stuff.  2. I woke up last Saturday with a left side rib muscle on fire. If I turned or leaned a certain way it would spasm that almost buckled my knees. I have been taking a break to let that settle. I don't want to get a long term injury. I think I pinched a nerve or just aggravated a muscles.   3. I am going on a mini-vacation to Florida (screw you Ohio weather) with a friend, and rolling that into a work conference I have next week. I will be with out my clubs for a week.  I will be back next in two Fridays to hit the ground running with some warmer temps and better weather in Ohio, hopefully. I would really like to get more out on the course and the range.     
    • Day 580 - 2026-05-04 Played eight holes. Sometimes golf kicks you in the nuts. 😉 
    • I work with a lot of golfers who want more shaft lean at impact, who currently have AoAs that range from +2° to -2°, and who love to see the handle lower and more "in front of their trail thigh" from face-on at P6. And a lot of these golfers try to solve the issue by working on the downswing. They do something to drag the handle forward. Or they just leave their right thigh farther back so the same handle location "looks" farther forward. Or they move the ball back in their stance. Or they push themselves down into the ground to get the handle lower and increase (decrease?) their AoA (to be more negative). The real fix is often to get wider in the backswing. To do LESS in the backswing. To hinge less, fold the trail arm less, abduct the trail arm less. I had a case of this over the weekend. Before, the player had 110° of trail elbow bend, "lifted" his trail humerus only a few degrees, etc. The club traveled quite a bit around him, and he tended to "pick" the ball from the fairways. In the "after" swings below (which are mild exaggerations — this golfer does not need to end up at < 70° of elbow bend. These were slower backswings with "hit it as hard as you normally would" intent downswings), you can see that he bent his elbow about 70° instead of 110° and lifted his right arm an extra ~15° or more. You can't see how much less this moved his hands across his chest (right arm abduction), but it was also decreased. His hands stayed more "in front of" his right shoulder rather than traveling "beside" them so much. The two swings look like this: The change at P6, without talking about the downswing one little bit (outside of him telling me that he tends to pick the ball), is remarkable: Without 110° of elbow bend to get out (which he gets to 80°, a loss of 30°), the golfer actually loses slightly less elbow bend (70 - 50 = 20), but delivers 30° less elbow bend, lowering the handle and letting the elbow get "in front of" the rib cage… because it never got "behind" or "beside" the rib cage. If you look at this video showing the before/afters of P6, you'll note the handle location (both vertically and horizontally) and the shoulders (the ball is in the same place in these frames). This golfer's path was largely unaffected (still pretty straight into the ball, < 3° path and often < 1.5°), but his AoA jumped to -5° ± 2°. I've always said, and in talking with other instructors they agree and feel similarly, that we spend a lot of time working on the backswing. This is another example of why.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.