Jump to content
IGNORED

KZG evolution, Wishon 560, Mizuno mx 20's test comparison


Note: This thread is 5116 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

KZG's were the best, most solid, easiest to hit by me. I first hit the mx 300, 200 and mx 20 at Big Oak in Rochester NY, it is a pro shop?range, great place! I liked the Mx200 and mx 20's best. I then went to a fitter and had the KZG evolutions, Wishon 560's KZG forged 2's fit. Went to Golfers Edge in Rochester same day. (once lie angle was set upright I was hitting the clubs on the sweet spot.) All clubs stiff shaft.

I then brought them (Wishon 560 6i, KZG Evolution 6i and 8i, Mx20 6i, 8i, the Mx 200 6i, right after being fitted to BIG Oak pro shop/range and hit them. The results were: KZG Evolution was the best. I hit a huge bucket or more of balls. I would hit a club until I got in a groove with that club and hit 3-6 in a row well then go to the next club and then back and forth agian and again. RESULTS: I could hit the KZG Evos the best by far. I could hit the first or second ball great and then hit 3 or 4 in a rown the same place, boom boom boom I would then try another club and it would take me a few to get in a groove and I could never get the groove going like with the KZG evo's. Next best...Wishon 560 but I hit the Mx20 almost as well as the 560, and the mx20 wasn't fitted to me as it was a borrowed club. I liked the mx200 and then mx300 last in that order. I couldnt hit then nearly as well and never hit that real solid hit I was looking for that I had in the KZG.
Finish and feel? KZG was by far the best. Apparently these are foged in Japan at same plant as Mizuno's but are hand ground and finshed. It really showed! They felt like they had been hand finished for days. Anyone could see they were far superior in finish. I had the satin finish and the club heads in your hands were obviously the nicest feeling and looking, I can't emphasize how nice they were. My girlfriend and a couple non-golfers noticed the difference easily, they were that nice. I had the satin finish. The Wishon on the other hand, had milling marks and sharpish edges, It looked sort of crude but high quality at the same time. The Mx 20's looked better than the Wishon even though it was a 4 year old club, and the mx200 finished last as it looked like a cast cavity back in comparison. I was suprised by this. Now the problem, KZG evolutions $125/club, Wishon 560 $90/club, Mx20's or mx 25's $200-$450 a set on secondary market, mx 200's $500-$699 new. I really wanted to like the Wishon's best due to price or the Mx 200s as they were easier to get and way cheaper but the results I had were obvious to me. I hit mid 80's to high 90's with most problems off tee, (for refernce). I'm going to hit them all again as I have them at home and will post pictures too if anyone wants. Anyone have some KZG heads out there for sale? helloooo?
Link to comment
Share on other sites


Sorry , I m keeping mine .

I just bought another set at the ebay for travel .
What I Play:
913D3 9.5°Diamana Kai'li 70 Stiff  "C3" | 910F 15°, Diamana Kai'li 80 Stiff "D2" | 910H 19°,  Diamana Kai'li for Titleist 85 Hybrid Stiff | Titleist 714 AP2 4 to P Aerotech Steelfiber i110 S | SM4 Vokey 50.12, 54.14 & SM5 60.11K| 34" Edel Umpqua + 40g Counter Weight
 
Link to comment
Share on other sites


Which shafts did each club have?

I have always believed that if two clubs have the same loft and lie angle, the shaft will be the determining factor.

In my bag:

some golf clubs

a few golf balls

a bag of tee's some already broken the rest soon to be

a snickers wrapper (if you have seen me play, you would know you are not going anywhere for a while)

and an empty bottle of water

Link to comment
Share on other sites


Precision stiff for the Wishon and KZG stiff, the mizuno mx 20 has dynalite gold with sensicore (feels great) Mx 200 had standard issue stiff whatever.
Link to comment
Share on other sites


  • 2 weeks later...
KZG's were the best, most solid, easiest to hit by me. I first hit the mx 300, 200 and mx 20 at Big Oak in Rochester NY, it is a pro shop?range, great place! I liked the Mx200 and mx 20's best. I then went to a fitter and had the KZG evolutions, Wishon 560's KZG forged 2's fit. Went to Golfers Edge in Rochester same day. (once lie angle was set upright I was hitting the clubs on the sweet spot.) All clubs stiff shaft.

UPDATE, I ended up getting a used set of MP52's on bayarama for $425 used. I took them to range 2xs and played 9 today. I love them. I messed around and wanted to get KZG's but too expensive up here and too much trouble finding anyone to build them.... Maybe my next ones will be KZG but I really like these Miz 52's. They are solid and easy to hit. 3 and 4 arn't bad either. I hit a 5 iron 195 stiff. If you put a decent swing on them they just go where you were thinking and will supprise you how well you start to aim. Really fun. I almost also got the MX300's but I was hitting these better. Don't know why...

I KZG's were awsome and I wonder how a full set of those would have been but I'm not dissapointed for the cake I spent. They really feel great.
Link to comment
Share on other sites


Note: This thread is 5116 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    Golfer's Journal
    ShotScope
    The Stack System
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-15%): "IACAS" for Mevo/Stack, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope.
  • Posts

    • Day 568, May 23, 2024 Loooooooong day today. Got some shadow work done with an umbrella.
    • Day 148: 5/23/24 Hit balls on the range measuring ball speed for each club. Recently watched a fitting video where the fitter said he targeted 5 mph ball speed increase for each club.  Mine weren’t quite there. 4 and 5 mph were pretty similar except for 1 ball. Big jump for hybrid, bigger jump for 4-hybrid, and huge change for driver. Swung for the fences with driver and hit them all pretty straight at the end of my session. Several at 111 mph, which is above my normal speed. Finished with chipping release 1 with several clubs.  Good session!
    • Birdied 15 at my home course today and made a birdie the other day at a course I don’t usually play. Will update the spreadsheet once I’m home on my computer. 
    • Day 70. Played 9 at Grand Niagara. Very very windy day, but I hit the ball well for me. The wind did help me hit my longest drive ever at 282y and I did make a birdie on a par 5. 
    • So, the struggle right now with the driver is that I’m dipping down with the body, shallowing wrongly.  When I try to get my arms down, I end up not turning much at all. End up hitting the sweeping overdraws or if I dip with the body then I’ll hit massive pushes. I’m trying to turn better with the body and also get the arms down at the same time. Easier with the irons than it does the driver. also, here’s an image when you almost entirely missed the ball. 🤣🤣🤣
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

The popup will be closed in 10 seconds...