Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5690 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I've been reshafting clubs for awhile, but even using a heat gun I end up mangling the tips on shafts because i didn't have a puller. I used a modified crowbar to pull the heads, but it wasn't enough leverage to pop the heads loose without adding a ton of heat.

Finally bought a Roberts hydraulic puller from Ebay, total price with shipping was $95. The other night I did three pulls, and re-installs in 45min, the difference is amazing. Also, the clamp is SO much easier to use for regrips and whatnot then the plastic vice insert I was using, and much safer for the shaft. If you guys have used those plastic club clamps you know what I mean, you have to pop them on/off the shaft and then insert it into your home vise.

The shafts I killed before were all POS stock shafts I didn't care about but I've started pulling some decent (Aldila NV, Prolaunch Blue) shafts that I didn't want to hurt so it was time to step up.

Anyway, if anyone is in the market, I think the Roberts is a very good unit for the price. Only issue is that the crowsfoot will scratch the paint on the shaft just above the hosel...I have to remember to put some tape on that area before pulling shafts from now on.

Driver: i15 8* UST Axivcore Red 69S
3w: CB1 15* Grafalloy Prolaunch Platinum 75s
5w: G10 18.5* UST V2 HL
3h: HiFli CLK 20* UST V2 Hybrid
4h: 3DX 23* UST V2 Hybrid5i-pw: MX-23 TT Dynalite Gold S300GW/SW: RAC 52*and 56*Putter: SabertoothBag: KingPin


Posted
Got a link on eBay for one?

Kevin

-------
In the Bag
Driver: G15 9.0*3 & 5 Wood: BurnerHybrid: Pro Gold 20*; 23*Irons: MP-58 (5-PW)Wedges: Vokey Spin Milled 52*8; 56*14Putter: Newport 2.0 33"Balls: NXT


Posted
I've been thinking about getting one of these for a while. I love to tinker to this would be fun. How were the instructions? Did they detail just extractions?

Kevin

-------
In the Bag
Driver: G15 9.0*3 & 5 Wood: BurnerHybrid: Pro Gold 20*; 23*Irons: MP-58 (5-PW)Wedges: Vokey Spin Milled 52*8; 56*14Putter: Newport 2.0 33"Balls: NXT


Posted
I really didn't look at the instructions, it's pretty self explanatory once you see the puller.

Driver: i15 8* UST Axivcore Red 69S
3w: CB1 15* Grafalloy Prolaunch Platinum 75s
5w: G10 18.5* UST V2 HL
3h: HiFli CLK 20* UST V2 Hybrid
4h: 3DX 23* UST V2 Hybrid5i-pw: MX-23 TT Dynalite Gold S300GW/SW: RAC 52*and 56*Putter: SabertoothBag: KingPin


Note: This thread is 5690 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Wordle 1,657 5/6* 🟨🟨⬜⬜🟩 ⬜⬜🟨🟩🟩 ⬜🟩🟩🟩🟩 ⬜🟩🟩🟩🟩 🟩🟩🟩🟩🟩
    • Day 37: did my drill swings in the garage with foam balls for about 15 minutes. Working on getting my backswing more turned and then going from there. 
    • Thanks but honestly… I don't know any other way. I don't mind being wrong so long as I know where to go from there. I don't like being wrong — I'd love to get things right (which is different than "being right"). I recommend grabbing a furniture slider or a paper plate or something, and doing something like this: First, make a swing where you let your trail foot swing out as you turn, then twist that foot back in. From DL and FO, it'll look like this: Then, during a regular backswing, try to twist your foot in slightly (demonstrated in the left image): You'll notice a crease along the trail side of your hip, your pelvis will "fold" into that thigh (internal rotation of the hip joint), and your "bits" will be squished a little between your pelvis and your thigh. Ben Hogan said once: "At the top of the back swing the groin muscle on the inside of your rt [sic] leg near your right nut will tighten," Hogan wrote. "This subtle feeling of tightness there tells you that you have made the correct move back from the ball." I don't know about that, but you will probably feel something down around that area.
    • Yep. I think it will start to feel even more athletic when we start on the downswing stuff later.  I know, it's just I want to be younger so I have more time to enjoy the changes. 🙂 
    • I need to drop a couple of stone. 🙂 😛    Yep. Yeah, but in the end, it feels more athletic, like you're actually using your legs, yeah? As you know… we use the best available info we have. Like others, I was fooled a little by 2D images for awhile (moving or still). Unlike others, I've learned and grown and moved on since then, while they're still looking at their images (often from lousy camera angles).
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.