Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 5669 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
I played 9 holes today and I concluded that I need to look at a stiff shaft for my driver and my rescue 4i. Any aftermarket shafts that are better than others? Any input on this subject would be great.

Taylormade R11 TP Driver w/ Aldila RIP 60a
Taylormade R11 3 Wood Stiff Shaft
Taylormade Burner 2.0 3 Iron Stiff Shaft
Taylormade Burner 1.0 Irons
Titleist 52 Degree Vokey Wedge 08 Bounce

Cleveland 56 Degree CG15

Cleveland 60 CG11

Odyssey White Hot 2-Ball Putter w/ Medium grip


Posted
Best is probably to go get fit for one, its damn near impossible to recommend one with out some other information that will be seen in a launch monitor etc...

My Clubs:
Ping I3 + blade 3-pw
9.5 09 Burner with prolaunch red
Nickent 4dx driver
Taylormade Z tp 52, 56, 60
YES Carolyne putter


Posted
picking a shaft is like picking new socks
so personal its impossible to tell you what's "best"
its a lot more than picking a flex - what exactly r u looking to achieve out of the shaft?

high spin, low spin, high traj., low traj. etc.......

as metioned above, find out what you want out of thw shaft, get fit and then buy one that fits your budget
"My swing is homemade - but I have perfect flaws!" - Me

Posted
Can I ask how you "concluded" that you need a stiff?

Go to a store with a launch monitor and try out some different shafts.

My Clubs
Driver - LV4 10* R flex
Wood - sam snead persimmon 2 wood (for windy days)
Hybrid burner tour launch 20* stiff flex.
Irons - Tour Mode 3i,4i stiffIrons - FP's 5-PW R-flexWedge - spin milled 54.14Wedge - spin milled 60.07Putter - Victoria Lowest round 2010: 79 (par 70)Latest rounds at...


Posted
Can I ask how you "concluded" that you need a stiff?

I recently trasitioned from graphite eagle eye irons to steel shafted irons which work very well. I also bought a taylormade 3 wood with a stiff shaft that has worked very well. I have a extremely fast swing which leaves me really no choice but to look at stiff shafts. I also tried my friends driver which has my exact driver head, but with a stiff shaft and that worked very well. That is how I "concluded" that I need a stiff shaft.

Taylormade R11 TP Driver w/ Aldila RIP 60a
Taylormade R11 3 Wood Stiff Shaft
Taylormade Burner 2.0 3 Iron Stiff Shaft
Taylormade Burner 1.0 Irons
Titleist 52 Degree Vokey Wedge 08 Bounce

Cleveland 56 Degree CG15

Cleveland 60 CG11

Odyssey White Hot 2-Ball Putter w/ Medium grip


Posted
I recently trasitioned from graphite eagle eye irons to steel shafted irons which work very well. I also bought a taylormade 3 wood with a stiff shaft that has worked very well. I have a extremely fast swing which leaves me really no choice but to look at stiff shafts. I also tried my friends driver which has my exact driver head, but with a stiff shaft and that worked very well. That is how I "concluded" that I need a stiff shaft.

how fast is your "extremely fast swing"...? you should goto a launch monitor and get it checked out before you make the wrong conclusions.

but others are right. you definitely should get your swing checked out on a launch monitor to get a good measurement of what kind of stiff shaft you need. I recently went through this and was fitted for a specific shaft that was fit for my swing and what I wanted otu of my ball flight. Each manufacturer has a different measurement of stiffness so depending on your swing speed, ball flight, swing in general, they may fit you into something different than what anyone can recommend. I suggest you do that.

DST Tour 9.5 Diamana Whiteboard
909F3 15* 3 FW stock Aldila Voodoo
909F3 18* 5 FW stock Aldila Voodoo
'09 X-Forged 3-PW Project-X 6.0 Flighted
CG15 56* X-Tour 60* Abaco


Posted
how fast is your "extremely fast swing"...? you should goto a launch monitor and get it checked out before you make the wrong conclusions.

The last time I hit into the launch monitor earlier on in the season before I was looking at a stiff shaft I was recorded as swinging 109 mph

Taylormade R11 TP Driver w/ Aldila RIP 60a
Taylormade R11 3 Wood Stiff Shaft
Taylormade Burner 2.0 3 Iron Stiff Shaft
Taylormade Burner 1.0 Irons
Titleist 52 Degree Vokey Wedge 08 Bounce

Cleveland 56 Degree CG15

Cleveland 60 CG11

Odyssey White Hot 2-Ball Putter w/ Medium grip


Posted
The last time I hit into the launch monitor earlier on in the season before I was looking at a stiff shaft I was recorded as swinging 109 mph

Gotcha. sounds about right. should put you the stiff shaft range. Now it depends on what you prefer personally. Do you like lower-mid trajectory or high trajectory ball flight? If you have any trouble getting the ball in the air, like many high h'cappers do, a higher trajectory ball flight will help do that. Depending on what you want, there are different kinds of stiff shafts with different kick points, etc that'll help get you the flight you're looking for.

DST Tour 9.5 Diamana Whiteboard
909F3 15* 3 FW stock Aldila Voodoo
909F3 18* 5 FW stock Aldila Voodoo
'09 X-Forged 3-PW Project-X 6.0 Flighted
CG15 56* X-Tour 60* Abaco


Note: This thread is 5669 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.