Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6806 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Gentlemen:
Please help! Played on Saturday and my driver is slicing on occasion, and firing straight as an arrow other times. Usually I'm a straight driver...what the heck is happening? Losing distance, and ripping it with a terrible left-to-right flight.

Going to the range tomorrow...any swing thoughts for me???

RA

In my bag...
DRIVER: TaylorMade R5, 9.5
HYBRID: Halo 2i
IRONS: FTX
WEDGES: 52, 56, Izett 60PUTTER: Cameron Circa 62 #3


Posted
Sorry this is off topic to your question, but I noticed you are from Bucks County. I'm from Newtown, where are you at?

Posted
Newtown? NICE - live in Yardley...5 miles away. I miss Goodnoe's...

In my bag...
DRIVER: TaylorMade R5, 9.5
HYBRID: Halo 2i
IRONS: FTX
WEDGES: 52, 56, Izett 60PUTTER: Cameron Circa 62 #3


Posted
Newtown? NICE - live in Yardley...5 miles away. I miss Goodnoe's...

Hahaha, same here man. The service wasn't all that great there, but they made the best Eggs Benedict for breakfast. No clue what they're gonna put up there now. I heard a Wawa, but I'm not sure.


Posted
If you are hitting a slice then the club face must be open when you are hitting the ball (but I guess you know that?). Either you are not releasing the club properly so that the club face is left open, or, you are letting your shoulders get ahead of your arms so that you are swinging out to in, cutting across the ball.

If the ball goes left first and then fades right you are swinging out to in and cutting across the ball. If the ball goes straight and then fades right its a problem with your release.

To sort an out to in swing, start your downswing by letting the club fall into the slot slightly before you begin uncoiling your body. Giving your arms a slight head start increases the probability that you'll swing in to out towards the ball.

If its a release problem you need to focus on really whipping the club through during release so that you don't leave the face open.

Taylormade r7 460
Callaway X 3 Wood
Callaway X 5 Wood
Callaway X 7 Wood
Callaway X Hybrid (24*)TaylorMade r7 Irons (5-PW)Mizuno MP-R Series Wedges (52,58 degrees)Ping G2 Anser Putter


Posted
The first thing I always check is my alignment especially if I am hitting it straight most of the time.
Usually when the tee box is at a weird angle I tend to open up my stance which of course will lead to a slice. I have my shoulders aiming one way and my thighs and feet pointing another.

That would be the first place I would check.

Keep it on the short grass.


Posted
The ball is starting off straight and then veering heavily to the right. I think I'm casting and releasing early, and then pulling a dead driver through the ball with an open face. THANK YOU for the swing thoughts...going to sneak out at lunch today and hit the range to sort this out. Tournament on Sunday...don't want to be banging the hybrid off the tees all day...

In my bag...
DRIVER: TaylorMade R5, 9.5
HYBRID: Halo 2i
IRONS: FTX
WEDGES: 52, 56, Izett 60PUTTER: Cameron Circa 62 #3


Posted

From a clubmaker point of view, here is a possible suggestion.

You will have to experiment with this change to see if it works for you. Remember, we are all unique and what works for one will not work for another.

The driver, being the longest club in the bag is the hardest to control. Sometimes it's the inability to close the face to square at impact and/or feel comfortable doing an inside to out swing.

If the driver is off the shelf, then it simply may not be the best fit for you.

But try this: get some lead tape. Wrap a whole bunch of it around the very end of the butt end of the handle. You will have to experiment with how much. Then try swinging your driver on the range. This counterbalance may help you feel the handle and as a result help you feel in an inside to out swing and close the face at impact. And many times it will produce more solid and consistent shots. If it does help, then find a clubmaker who can add the weight inside the butt end.

This is what club fitting is all about...finding what works and fits the player.

Hope this helps!

Rick
Columbus, Ohio
www.GolfClubPlayability.com


Posted
To sort an out to in swing, start your downswing by letting the club fall into the slot slightly before you begin uncoiling your body. Giving your arms a slight head start increases the probability that you'll swing in to out towards the ball.

I often have a similar problem. If I start missing drives, I push it right. Big Don's suggestion above is one of my swing thoughts when it starts happening. Another thing I also do sometimes is over-emphasize an in to out swing path during a few easy practice swings before hitting a drive. That is, I'll take the club back very upright, then let my arms loop back and fall into the slot to swing through VERY inside out. Seems like when I go back to my normal swing, my muscles retain just enough memory to straighten it out or even hit a little draw.


Posted
THANKS for your thoughts - really big help. Went to the range yesterday and still was hitting the fade. I did something that I may regret to fix it...changed my swing for ONLY my driver. WIDER stance...ball more centered at address...full turn with left shoulder under my chin on the backswing...and now I'm hitting it far and straight again. HOWEVER...this is a MUCH more aggressive swing that I like to take and my back will probably be in traction by Sunday night...

In my bag...
DRIVER: TaylorMade R5, 9.5
HYBRID: Halo 2i
IRONS: FTX
WEDGES: 52, 56, Izett 60PUTTER: Cameron Circa 62 #3


Note: This thread is 6806 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.