Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4870 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

So, I've kind of hit a plateau in my game. I'm around an 18 handicap. My game consists of lots of calculated misses with the exception of my wedges which are pretty solid. I'm long off of the tee with sometimes fight a pretty bad slice. My iron game is what has been really troubling for me, I struggle to hit a solid shot with anything longer than my nine iron. I'm pretty content with my wedge game.

I'm currently hitting a Cobra S3, Cobra Pro CB's(which lately i've started to believe are above my skill level), and 54 and 60 degree vokey's.

I'm looking for some good practice/drills for hitting more solid consistent shots with my irons. I feel like my iron play is on par with a 25-30 hadicapper.


Posted

Here is one drill that will help you with your irons:

Place a head cover under your right arm pit (for lefties)

Tee the ball up.

Start practicing with small swings.

Finish your practice session with 3/4 swings.


Posted
Originally Posted by weswaitman

So, I've kind of hit a plateau in my game. I'm around an 18 handicap. My game consists of lots of calculated misses with the exception of my wedges which are pretty solid. I'm long off of the tee with sometimes fight a pretty bad slice. My iron game is what has been really troubling for me, I struggle to hit a solid shot with anything longer than my nine iron. I'm pretty content with my wedge game.

I'm currently hitting a Cobra S3, Cobra Pro CB's(which lately i've started to believe are above my skill level), and 54 and 60 degree vokey's.

I'm looking for some good practice/drills for hitting more solid consistent shots with my irons. I feel like my iron play is on par with a 25-30 hadicapper.


I may not be a scratch golfer, but I might have some good advice for you if you answer a few questions to help me figure out what it is about your irons that you are struggling. Are you slicing it with your irons? Are you having trouble hitting it solid with the irons? What do you divots look like on the fairway after say hitting a 7 iron?

:tmade: R1 Driver
:tmade: Burner 18.5 Wood
:tmade: Rocketballz 19 Rescue

:mizuno: MP-59 4-PW Irons
:cleveland: CG16 52, 56
:cleveland: Classic Mallet Putter

:bridgestone: e5 Ball


Posted

Slices are not uncommon with my irons, and yes, i'm having trouble hitting it solid. I'd say I usually don't take much of a divot with my irons other than my wedges. If I do take a divot I'd say it's usually behind the ball.


Posted

Yeah well first of all, you want the divot in front of the ball. There are plenty of guys on here who are much more knowledgeable than me and can give you better insight, but i'll throw out some tips that have worked for me.

I struggled with a slice for a long time until I got a few lessons from the golf pro at the private club I work at. One of the best easy tips he gave me to work on hitting more from the inside of the ball and being able to come through and turn my hands over (which led to me ability to now hit a small draw and no longer slicing it at all), was that he put my driver head cover down about 3-4 inches away and slightly behind the ball. He angled the headcover so it pointed past my right shoulder. Idk if you can picture that but its a real simple thing that worked wonders for me. Everytime I swung it got in my head to hit the inside of the ball better. If I came over the type or from the outside (which is the main reason one would slice), I would hit that headcover.

Another thing that has worked great for me and I still to do this day on the range is lay a tee down about 3 inches in front of the ball. If you hit your shot flush and properly the ball should still fly nice but it along with the club should snag that tee as a result of producing a small divot in front of the ball. This will help give you feedback and force you to start really hitting the ball first and then take a divot.

Other things you can do is rotate your hands slightly more clockwise on the grip which will help you to turn your hands over upon impact. Some people may not like that cause it can be a bit of a bandaid maneuver and not fully fix a slice. I really only use that grip with my driver.

Again, talk to the more experienced and qualified guys on here, but all those have worked for me and it sounds like you have the exact problem I did a year ago.

:tmade: R1 Driver
:tmade: Burner 18.5 Wood
:tmade: Rocketballz 19 Rescue

:mizuno: MP-59 4-PW Irons
:cleveland: CG16 52, 56
:cleveland: Classic Mallet Putter

:bridgestone: e5 Ball


Note: This thread is 4870 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I think part of it is there hasn't been enough conclusive studies specific to golf regarding block studies. Maybe the full swing, you can't study it because it is too complicated and to some degree it will fall into variable or random.  
    • Going one step stiffer in the golf shaft, of the same make and model will have minor impact on the launch conditions. It can matter, it is a way to dial in some launch conditions if you are a few hundred RPM off or the angle isn't there. Same with moving weights around. A clubhead weights 200-220 grams. You are shifting a fraction of that to move the CG slightly. It can matter, again its more about fine tuning. As for grip size, this is more personal preference. Grip size doesn't have any impact on the swing out of personal preference.  You are going to spend hundreds of dollars for fine tuning. Which if you want, go for it. I am not sure what your level of play is, or what your goals in golf are.  In the end, the golf swing matters more than the equipment. If you want to go to that level of detail, go find a good golf club fitter. ChatGPT is going to surface scan reddit, golfwrx, and other popular websites for the answers. Basically, it is all opinionated gibberish at this point.   
    • Wordle 1,640 4/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜🟩 ⬜🟩🟩🟩🟩 🟩🟩🟩🟩🟩
    • Well the first advice I would give is to look at your swing. If you are swing out to in, it may be difficult to fix your misses with club adjustments. They would only be a bandaid. I use midsize grips because I have long fingers and I feel I have more control with them. I also have tinkered with shaft length and swing weight. But I know when I miss it’s because my swing was off.
    • Wordle 1,640 5/6 ⬜⬜⬜⬜⬜ ⬜⬜🟨⬜⬜ 🟨🟩⬜⬜🟩 🟩🟩⬜🟩🟩 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.