Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4546 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Currently hitting a titleist d3 13 10.5 with a RIP 60 stiff

Getting a little older (51) and the club head speed is not what it use to be, would like something with a little more pop....

Was looking at the RIP Phenom 50 in Regular or the Adilla Magnum 44 in Regular

Any other suggestions?


Posted

But going from a stiff to a regular wont increase your distance, that's a myth.

But, I would look for a shaft with a mid to mid/low kick point to get the launch higher, and a bit more spin on the ball. This will help you gain carry. Also look into just an overall lighter club if you want to gain clubhead speed.

You can always go get fitted. Most all drivers are low spin, high launch. I would go find a place that has a fitting cart, were you can interchange between a lot of golf shafts. See which one gives you better numbers.

Matt Dougherty, P.E.
 fasdfa dfdsaf 

What's in My Bag
Driver; :pxg: 0311 Gen 5,  3-Wood: 
:titleist: 917h3 ,  Hybrid:  :titleist: 915 2-Hybrid,  Irons: Sub 70 TAIII Fordged
Wedges: :edel: (52, 56, 60),  Putter: :edel:,  Ball: :snell: MTB,  Shoe: :true_linkswear:,  Rangfinder: :leupold:
Bag: :ping:

Awards, Achievements, and Accolades

Posted

Was looking at a shaft in the 40-50 gram range mid/low in a regular, any good ones?

Shafts I am looking at are:

RIP Phenom 50 R
Aldila Magnum 44 R
UST ATTAS 4u R
UST ATTAS 3 R
Bassara W 43 R


Posted

Unless your willing to shell out money to reshaft and basically go trial by error, i recommend getting fitted. Especially were you can see the numbers and figure out which shaft optimizes your ball flight.

Matt Dougherty, P.E.
 fasdfa dfdsaf 

What's in My Bag
Driver; :pxg: 0311 Gen 5,  3-Wood: 
:titleist: 917h3 ,  Hybrid:  :titleist: 915 2-Hybrid,  Irons: Sub 70 TAIII Fordged
Wedges: :edel: (52, 56, 60),  Putter: :edel:,  Ball: :snell: MTB,  Shoe: :true_linkswear:,  Rangfinder: :leupold:
Bag: :ping:

Awards, Achievements, and Accolades

Posted

Depends on were you live. There are some good local places, some retail chains don't do to bad of a job. It really all depends on the fitter (the person) you get to fit you. Go ask around. Maybe go to a golf course and ask a local pro were a good place is.

Torque, helps decrease the amount of rotation the clubface has through the swing. Lower torque means less rotation. With slower swing speeds, it becomes less important.

Weight, can decrease swing speed. Heavier golf shafts are naturally stiffer. So one way is to find a shaft type you like, and maybe get it lighter or heavier. For example a 60 gram stiff is going to be slightly stiffer than a 50 gram stiff shaft of the exact same make and model, in most occasions.

Launch is dictated by your swing, and by the kick point on the golf club. Basically the club will bend at a certain point, or load. A high kick point will lower the launch angle, low kick point will increase the launch angle.

Again, a fitter will have more information for you, and what your looking for compared to what you currently have.

Matt Dougherty, P.E.
 fasdfa dfdsaf 

What's in My Bag
Driver; :pxg: 0311 Gen 5,  3-Wood: 
:titleist: 917h3 ,  Hybrid:  :titleist: 915 2-Hybrid,  Irons: Sub 70 TAIII Fordged
Wedges: :edel: (52, 56, 60),  Putter: :edel:,  Ball: :snell: MTB,  Shoe: :true_linkswear:,  Rangfinder: :leupold:
Bag: :ping:

Awards, Achievements, and Accolades

Posted

Bassara - try the Titleist Bassara first since it's no upcharge.

Ping G400 Max 9/TPT Shaft, TEE EX10 Beta 4, 5 wd, PXG 22 HY, Mizuno JPX919F 5-GW, TItleist SM7 Raw 55-09, 59-11, Bettinardi BB39

 

Awards, Achievements, and Accolades

Posted
But going from a stiff to a regular wont increase your distance, that's a myth.

What makes you says this?

:tmade: R15 14* Matrix Black Tie 7m3

:adams: Speedline Super S 3w & 5w Matrix Radix HD S VI

:callaway: X-12 4-PW Memphis 10

IONNOVEX  Type S GDT 50*, 54* & 62* Mitsubishi Rayon Kuro Kage Black 80ir

:odyssey: Tri-Ball SRT

-Landon


Note: This thread is 4546 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 80 - 2026-03-12 30 minutes at the range playing some simulated holes, picking targets, etc. 15 minutes of putting work.
    • I was on Golf Digest's Golf IQ podcast with Sam Weinman talking about being a "golf dad." https://www.golfdigest.com/story/5-golf-dads-advice I followed: Ian Poulter Mike Thomas Johnson Wagner Kevin Van Valkenburg Apparently the series was only five parts long, as they wrote up a summary article on it.   Golf Dad Part 5: Erik Barzeski on how to switch between father and instructor Podcast Episode · Golf IQ · March 2 · 35m Golf Dad Part 5: Erik Barzeski on how to switch between father and instructor — Golf IQ Erik Barzeski, Director of Instruction at Golf Evolution, is the father of a golf pro and an author, but also has the perspective of someone who works with juniors. The ability to switch between wearing those different...
    • They sure do. 158 with an 8 iron is on the high end for me
    • Went back to controlling my knees. That part was getting a bit sloppy when I worked on my backswing. Right hip didn't slide or gain internal rotation. I would just rotate back and around and the left knee would be in a bad spot. Really focusing now on keeping my left knee very stable and straighter in the backswing. I can't go back to the old pattern of overturning the hips. I was returning to my old pattern to time my downswing. Turn forever.  Left knee controls both knees and hips, acting as an anchor. Feel like it straightens a bit.   Hinge sooner and faster. Not in a way that sends the hands out and flips the club over. I still noticed when the hands get to A2.5, the hands would want to flip over and flatten the club out a ton.  Still trying to figure out how to roll the forearms a bit open and not just roll the club inside a ton.  Figure out the timing to get the hands down. Still getting a bit of right elbow collapsing in the downswing because the arms are too high when I turn. Everything is happening sooner now. If the hips are controlled, the backswing is shortened. Because it is shortened I don't know when to get the hands down and I just turn because the downswing is a go.  Very slow (50%) swings are decent.  
    • Distances look fine, no?
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.