Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4205 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

I'm currently in the market for a new (used) set of irons. I currently play with an old set of Titleist 962 with s300 stiff shafts, standard lie and standard length. I am a left handed amputee and use a prosthetic so I am not able to shape the ball as well as I'd like. I haven't been playing nearly as often as I used to after I played high school, but I have started seeing noticeable improvement in my game this year that warrants me to think about new clubs. I carry about a 12 handicap now but it was as low as 4 in high school and would like a set that would help me shape shots better and bite better than my worn irons, something like Titleist AP1s, but I have been out of the loop so long, I don't know what to look for. I have a huge swing speed with an average drive of about 330-340 but my approaches leave a lot to be desired. My max is about $400.

Any suggestions?


Posted

Also, because of my swing speed, I would prefer a 3-pw instead of what seems normal now 4-gw. I have a 52, 56 and 60 Vokey with Diablo Driver and 18 degree.


Posted
Your 4 iron is about what a 3 iron used to be. The lofts have been jacked about a full club from the clubs of the 90s

Posted
I'm sorry I didn't really give a club to look at. The ap1 is a real nice club. The jpx 825 pro is nice also. Should be able to pick either up used in that range depending g on if you eBay or Amazon. Some shops may have some solid used sets in both models. Good luck and swing every club you can. It may surprise you on what you end up with. I went out with jpx ez irons and left with Adams idea super s. Again good luck.

Posted
Patrick, Does the prosthetic make fitting clubs to you difficult or unusual? Perhaps your best bet would be a visit to a proper fitting centre (Ping, Titliest, Mizuno etc)? Regards Mailman

Mailman

Awards, Achievements, and Accolades

Posted

Your 4 iron is about what a 3 iron used to be. The lofts have been jacked about a full club from the clubs of the 90s


So does everyone play with 3 woods and 3 wedges now? I just bought a 58 degree to replace both my 56 and 60 so I could add another wood to my bag, guess I really didn't need to do that.


Posted
So does everyone play with 3 woods and 3 wedges now? I just bought a 58 degree to replace both my 56 and 60 so I could add another wood to my bag, guess I really didn't need to do that.

Play what ya need! I've now got 5 wedges in the bag, pw, aw, 2 x sw & a lw! Irons up to 5i, a 3h and driver, still got room for one more club, it won't be another wedge though! I'm thinking a 1h

Gaz Lee


Posted
It's all about your gaps. Some or should I say most will fill the gaps at the bottom of the bag wedges and such. Others will try and keep there gaps thru out there bag. It's all about you. I play 3 wedges and then a dri we 3 wood and 3 hybrid my irons are 4-p so it's all about your game

Posted
Average drive is 330-340 yards with one arm?? :bugout: [URL=http://thesandtrap.com/content/type/61/id/99512/] [/URL]

Amen


Posted

I'm 6'6" with super long arms, I play standard length even though I'm a tall guy. I also use a prosthetic and have a full arm, I lost my hand at the wrist.

I guess 330 is a but much, but I definitely average on the north side of 300.

Anyways, any other suggestions?


Posted

'the north side of 300'

What a fabulous address for a golfer.

Don't let these 'nattering nabobs of negativity' get you down, play your game.

i just bought some close-out Titleist VG3 irons with Nippon 950 shafts. I like 'em.

You need to consider the shaft stiffness with your powerful swing and speed.


Posted

I went with the same shafts, albeit newer, S300 stiffs and in 3-pw standard lie and length. I would love to get them for this weekend although this might be a perfect farewell for my trusty 962s, going out with my buddies on Saturday, and with my parents for Fathers day on Sunday.


Note: This thread is 4205 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 34 (14 Dec 25) - Got outside for a few moments to work on bump and runs with the 4h (again using the exaggerated weight shift reminder of the left (lead) heel). Finding that it helps keep the downswing arc extended.  
    • Wordle 1,639 4/6 🟩⬜⬜⬜⬜ 🟩⬜🟨🟨⬜ 🟩⬜🟩🟩⬜ 🟩🟩🟩🟩🟩
    • You can try it with some lead tape first to see if it works for you.
    • Wordle 1,639 5/6 🟨⬜⬜⬜⬜ 🟨⬜🟩🟨⬜ 🟩🟨🟩⬜⬜ 🟩⬜🟩🟩🟩 🟩🟩🟩🟩🟩
    • I am currently playing a Cobra Ltdx LS 9 degree driver and Cobra Ltdx LS FW3. Both with Tensei White stock stiff shafts and original weights of 12g (heel) and 3g (toe). My miss is usually a pull fade or sometimes a slice, swing is out to in. Driver swing speed about 112 mph. Grips are stock regular. Intended change: Driver: Switching to Tensei White x-flex one inch shorter which I suppose would be 44,5? Changing heel weight to 18g. Changing grip to Golf Pride Z-grip cord midsize. Change hosel setting to standard draw. FW3: Changing heel weight to 16g (apparently not available in FW weights, but supposed to be something called "internal weight" a club builder can add which fits between the weight and the screw?). Change grip to Golf Pride Z-grip cord midsize. Changing hosel setting to standard +1. The goal is to 1) get better grip since I tend so lose grip in warm and moist conditions with the current grips and 2) mitigate the misses to start more straight with less side spin. Also considering adding the Cobra Ltdx LS FW5 instead of my old Taylormade R9 and getting 14g heel and 6g toe weights with the same grip as the others and hosel setting standard +1.   All of the above is based on conversations with ChatGPT and, as everyone knows, it can come up with pretty much whatever but I spent a few hours asking about different perspectives etc and this was the recommendation. So, my question is basically, does it make any sense?   Thanks.
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.