Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 4199 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

OK, I just made an impulse buy on ebay for a real good deal on a 54 and 58 SM5 vokey.

I normally use stiff shafts and haven't been fitted in years. Anything outside 100 yards I

use my gap wedge AP1 so most shots with my 54 and 58 will be softer swings, bunker

shots, and chips.

The wedges have regular flex and have been cut 1 1/2" short. I'm 5ft 9in and wasn't fit

for my SM4 wedges.

Will the shorter wedges and regular flex likely have a detrimental effect to my control and accuracy??

Thanks!


Posted
Well it really depends on your feel . I'm 5-8 and I choke down on my wedges I get much more control and much better impact as with wedges distance doesn't matter so the only thing you are looking for is control and I get much better control when choking down on my wedges.so i guess the shorter clubs may give you much more control than before

Posted

Wedges cut 1 1/2' short - unless trimmed at factory - will lose about 9 swingweight points from standard.

Most clubsmiths won't extend metal shaft more than 1" (otherwise, you create shear point on shaft).

You'll just have to try out the Vokeys and see if you like them. A reshaft might help you out.

I'm not trying to talk down on you, but this is another reason to avoid buying golf clubs off of eBay: you don't get to test them first.

Focus, connect and follow through!

  • Completed KBS Education Seminar (online, 2015)
  • GolfWorks Clubmaking AcademyFitting, Assembly & Repair School (2012)

Driver:  :touredge: EXS 10.5°, weights neutral   ||  FWs:  :callaway: Rogue 4W + 7W
Hybrid:  :callaway: Big Bertha OS 4H at 22°  ||  Irons:  :callaway: Mavrik MAX 5i-PW
Wedges:  :callaway: MD3: 48°, 54°... MD4: 58° ||  Putter:image.png.b6c3447dddf0df25e482bf21abf775ae.pngInertial NM SL-583F, 34"  
Ball:  image.png.f0ca9194546a61407ba38502672e5ecf.png QStar Tour - Divide  ||  Bag: :sunmountain: Three 5 stand bag

Awards, Achievements, and Accolades

Posted

Did the ebay seller have in the description that they were cut 1 1/2" on the shafts? If the seller didn't specify this, then you have a case for a refund based on the product doesn't match the description.

Then open an ebay case and send the clubs back. Ebay sides with buyers, so you should be fine.

Driver: Callaway Big Bertha 10.5* 

3WD:  Callaway Big Bertha 15* / X2 Hot H4 Hybrid
Irons:  Callaway Apex 4-PW Project X 5.5 shafts

Wedges: Callaway MackDaddy 2  52/58
Putter: Odyessey Metal X Milled 1


Note: This thread is 4199 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • I've been Playing Golf for: 40 yrs My current handicap index or average score is: 4.0 factor My typical ball flight is: Straight however sometimes slight draw. The shot I hate or the "miss" I'm trying to reduce/eliminate is: squirt to the right due to to much arm not enough turn. Videos:  [Delete this, Embed Videos Here - https://thesandtrap.com/how-to/embed-videos/]
    • Wordle 1,656 3/6* ⬜⬜🟨🟨🟨 🟩⬜🟨🟨🟩 🟩🟩🟩🟩🟩
    • Wordle 1,656 4/6 🟩⬜⬜⬜🟨 🟩⬜⬜🟩🟨 🟩🟩🟩🟩⬜ 🟩🟩🟩🟩🟩
    • The first issue Erik spoke about is something we worked on for my swing during both GEARS sessions. GEARS was showing my pelvis center moving towards the ball during the back swing. I wasn’t the 4” guy though! This forced me to correct on the downswing to give myself space. My hip rotation was to high as well. We corrected it by first getting the weight off my heels in my stance and getting my posture correct. Then the feel was shifting back into my right hip at a 45 degree angle. This kept my pelvis center from moving towards the ball at the start of the backswing. I also didn’t sway back as much as I felt I did because of the angle I was shifting. Feel Ain’t Real. The cool thing about GEARS is as you work on something you can see the exact (Real) change happening. On video, it is much harder to spot this issue because of the 2D nature of filming. But I know what to look for now. Sadly, I was hurt all last year and most of this year so I really haven’t been able to work on it much. I did do a lot of backswing work though.
    • Wordle 1,656 3/6 🟨🟨⬜⬜🟨 ⬜🟩🟨🟩🟨 🟩🟩🟩🟩🟩
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.