Jump to content
Subscribe to the Spin Axis Podcast! ×
Note: This thread is 6339 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

0  

  1. 1. When chipping from off the green: pin IN or OUT?

    • I pull the pin every time
      2
    • I leave it in every time
      32
    • It depends. Let me explain.
      22


Recommended Posts

Posted
  Steaksauce said:
I read the exact opposite for Pelz.

Correct re Pelz.

I'll leave it in most of the time, unless I'm only chipping from a few feet off with a reasonably flat roll to the hole, then out it comes.

Driver: R7 SuperQuad TP 9.5° Fujikura Rombax 6X07
Hybrid: Rescue TP 19°

Orlimar3wood: Hip-Steel 15° (oldie but goodie)Irons: Ping i10 [4-GW] DG X-100Wedges: Ping Tour-W [54° & 58°] DG X-100Putter: i-Series Piper HBalls: B330-S or e5+


Posted
Pelz says leave it in! I never take it out.
Bag: Flight SS
Driver: 10.5* r5 draw with Pro Launch blue 65 Stiff
Irons: CCi Forged 3i-pw
Wedges: 56* CG12 black pearl and 60* low bounce RTG 900
Putter: i-Series Anser 35"Ball: e5+Tee: Zero FrictionGlove: FootJoy WeatherSofRangefinder: MedalistShoes: Sp-6 II, Adidas 360Scores this year:92 91...

Posted
Pin in. I love the sound the ball makes when it hits the pin and then drops hard into the hole.
Love that sound and I feel the pin gives me a feeling that it will stop my ball if I happen to hit the
shot to hard

Driver: TaylorMade Burner Superfast  9.5*

3 wood: Callaway X

5 wood: Cobra F/ST Speed LD

Irons: Orlimar HipSteel
Wedges: Vokey 50*, 54*SM, 58*SM

Putter: Scotty Cameron Futura

Ball: ProV1 

Shoes: FootJoy 

Bag: Callaway

Cart: Yamaha Gas

Home course:  Umpqua Golf Resort


Posted
if you take the pin out and the ball goes too fast and pops out of the hole then having a pin in is better as it at least gives you a chance

Driver: Taylormade R11 set to 8*
3 Wood: R9 15* Motore Stiff
Hybrid: 19° 909 H Voodoo
Irons: 4-PW AP2 Project X 5.5
52*, 60* Vokey SM Chrome

Putter: Odyssey XG #7

Ball: Titleist Pro V1x


Posted
I just about always leave the pin in unless I'm chipping from under about 15 feet. I have always felt that leaving the pin in gives me a better sense of depth perception and hence it helps me to more accurately judge distance. I also have the flagstick attended when putting from outside about 40 feet most of the time for exactly the same reason.

And no there is nothing wrong with my eyesight and yes I am a pretty decent chipper and lag putter in case you were wondering!

Posted
Ahhhhh....depends on how old the holes are at the course. If they wobble a bit with the wind...

leave them in if the wind is at yee back....
pull em' if the wind is at yee face....

In the Bag...Ping Hoofer

3dx Tour Square - UST V2 HMOI X Flex
3dx 15* - X flex
Baffler DWS 20* Aldila NV Stiff 4-GW 600XC Forged Irons- S Flex 55* SW - Burner XD 60* LW - Burner XD Craz E Putter <----ProV1x---> Pellet


Posted
What I believe (and I believe Dave Pelz explained a couple of times) is that you should base leaving the pin in or taking it out on the situation you are presented. If you are chipping uphill the back of the cup can be used as a backboard and hitting the back of the cup is softer than the pin and will have a little give to absorb a shot that has a little too much speed and still drop in the hole. Also with the pin out of the hole on an uphill put you have the entire cup to catch, but with the pin in you have the stick blocking part of the hole your ball could otherwise hit. The pin is a lot firmer than the ground that is the back of the cup, and if you hit the firm pin going too fast the ball has a higher chance of kicking away from the hole.

On a downhill chip if you catch the pin the ball could rebound to the high side of the cup and then roll downhill to the cup again, but if the pin is out on the downhill chip if the ball is moving too quickly it might have so much momentum that it could be propelled over the cup without catching anything to rebound off.

In summary if the chip is uphill I'll take the pin out, if it is downhill I'll leave it in, if it is side hill then I'll go with instinct and feel ;).

In my bag:

Driver: Burner TP 8.5*
Fairway metals/woods: Burner TP 13* Tour Spoon, and Burner TP 17.5*
Irons: RAC MB TP Wedges: RAC TPPutter: Spider Ball: (varies ) (Most of the time): TP Red or HX Tour/56---------------------------------------------------


Posted
I'm a believer in the "The pin never helped a good shot" theory.

That said, I hit plenty of bad shots so I'll only leave the pin in when I think a good shot is improbable (e.g., tough lie to a downhill pin).

Posted
I very very rarely leave the pin in. I feel I should be confident enough in my chipping abilty that I shouldn't need a backstop which usually keeps you from making chips instead of helping slow your out of controll ship shot down. Most of the time the pin just gets in the way when chipping from green side. There re two expcetions to when i don't take the pin out: I do leave the pin in when hitting from green side bunkers and I leave the pin in when I have a terrible lie in the rough.


What's In my bag:
Driver: Taylor Mader R7 425CC with 65 REAX (Co-designed by Fujikura) Mid Tip Stiff Flex
3-wood: Admas Tight Lies Tour Model 15* with Proforce V2 stiff flex Made by UST
Irons: Mizzuno GRADS MP (3-PW) S300 shafts (soon to be Project X Rifle shafts)
Wedges: 52 (standard bounce), 56* (standard bounce) & 58* (low bounce) CG12 black pearl
Putter: 34" Odyssey White Steel 2 Ball SRT Putter
What's In my bag:

Driver: R7 425CC 9.5° with 65 REAX (Co-designed by Fujikura) Mid Tip Stiff Flex

3-wood: Tight Lies Tour Model 15° with Proforce V2 stiff flex Made by UST Irons: GRADS MP (3-PW) Rifle Flighted ShaftsWedges: 52° (standard bounce), 56° (standard bounce) & 58° (low bounce)...

Posted
I find that even when my ball hits the cup hard it still drops in more often then when it hits the flag dead center at the same speed, so TAKE IT OUT!
Driver Titleist 905R 9.5* (Stiff Prolaunch Blue 65g)
Hybrid: PT 585.H 17 * (Stiff titleist 75g shaft)
Irons: 695.cb 3-9 ( Dynamic Gold S300)
Wedges: 735.CM 47* PW, Vokey 200 series 50.08 Oil Can Vokey Spin Milled 54.10 Tour chrome, Vokey Spin Milled 58.08 Oil canPutter: Wilson Staff Kirk Kurrie #1[CO.....

Note: This thread is 6339 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.

Join us here in The Sand Trap!

Registration is free and takes almost no time. You'll see one fewer ad per page and be ready to jump in and contribute your thoughts to any subject!

Click here to register (registration will open in a new page so you can continue to read what you came to read).

The popup will be closed in 9 seconds...