Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6489 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted
Hi guys,

I'm about to buy the new G10 driver, but as I live in Belgium and I'm ordering at golfsmith.com, I didn't get the chance to get fitted.
I hit my Taylormade V-steel 3 wood over 220 yards, but with no roll at all.
Which loft and shaft would you guys recommend? And no I don't know my swing speed but everyone tells me I swing it pretty fast.

Thanks!!

G10 driver 9° TFC / stiff
V-Steel 3 wood 15° /stiff
Carbon CB 3 - PW / stiff
Vokey Spin Milled 56°
Karsten B60 Hoofer Stand Bag 2008


Posted
Can you not go to a pro in Belguim and get fitted, then order the right spec from golfsmith?

Superquad
Fusion #3
Big Bertha Warbird #5
755 3-PW
Vokey SM56.10 & 60.08 White Hot 2-ball


Posted

Hi,
It would probably be difficult to recommend a shaft for you personally - What worked best for me was the stock TFC-129 stiff shafts, with 10.5* loft. My swing speed was averaging between 96-98, and that combination gave me the straightest flight/traj, with the lowest spin. Regular flex shafts typically work best for me, and my driver swing speed does fall between the regular/stiff range. But in this case, with the G10 in particular, there was no comparison between the two.

I REALLY dig this driver, by the way! If it's possible to do some sort of comparison, it would definitely be a benefit to you. Best of luck.
Scope


Posted
Its very hard to buy the latest and greatest and have whatever you buy remain the latest and greatest for long.

The PING Rapture driver is a G-10 on steriods; try it before you buy the G-10.
However, the G-10 is getting some great reviews.

I also noticed that TaylorMade now has a new driver called the "Beast" that apparently supercedes the SuperQuad, R7, R7 Draw, Burner and Burner Draw drivers. But apparently, the "Beast" is so new no one has tested it.

I'm a bit afraid to try the G-10 or the Rapture driver as I have spent about $2,000 on TM woods in the last year and another $1,500 on PING irons and I haven't gotten fully accustomed to either yet. Thus far though, I am very happpy with both selections.

One thing I hear over and over is that once a golfer finds a brand of clubs that works well for him (or her) they tend to stick to that brand for life. I have played PING irons now for over 30 years and Taylor Made woods for about 35 years. I keep trying others, but they just don't work for me.

I played a 8.5 degree loft and stiff shafts when I was younger. I now use a 10.5 degree loft and regular graphite shaft, and with newer equipment hit the ball just as far as ever and lot more consistently straight.

2007 Yamaha Cart
TaylorMade R7 460 Superquad Driver, 10.5, Reg flex (RF)
Taylormade R7 Titanium 3,5 & 7 Fairway woods RF
PING Rapture irons 4-9, PW, UW, SW, graphite RF
Odyssey White Hot Two Ball putter Ping Cart Bag, Pioneer in Atomic OrangeNow playing Titleist Pro V1x balls


Posted
If it's coming by courier, you'll get hit with tax (being in the EU). Anytime I get stuff from the States and it's come by courier it's happened to me.

Unless it's a huge difference in price - stay local! Or at least stay in the EU.

WEAPONS:
Taylormade R9 10.5 L Grafalloy Prolaunch Platinum stiff 65g
Taylormade R9 15 NU YS+6 stiff 65g
Taylormade R9 19 NU YS+6 stiff 65g
Taylormade Tour Preferred 4-PW KBS Tour X-Stiff Cleveland CG12 RTG+ DSG 51Cleveland CG12 RTG+ DSG 55Cleveland CG12 RTG+ DSG 59Yes! Tracy II putterTitleist...


Posted
Thanks for the advice guys

Mrobbie, yes ofcourse I can get fitted by a pro, but at my home club they're changing the driving range , and it will take till may before it's allowed to use drivers again.
And since they stole my previous driver and I have none atm, I don't want to miss my driver in the beginning of the season!

And hawkye, I guess I'm a lucky guy then, I ordered once at golfsmith and once at tgw.com and always only had to pay shipping costs... I'm gonna risk it again cause the dollar is so low :) !

G10 driver 9° TFC / stiff
V-Steel 3 wood 15° /stiff
Carbon CB 3 - PW / stiff
Vokey Spin Milled 56°
Karsten B60 Hoofer Stand Bag 2008


Posted
Its very hard to buy the latest and greatest and have whatever you buy remain the latest and greatest for long.

I am still not sure whether to go with the Burner or G10, but if the Beast would come out, I guess I'll go with the G10... unless it's coming out soon ofcourse ;)

G10 driver 9° TFC / stiff
V-Steel 3 wood 15° /stiff
Carbon CB 3 - PW / stiff
Vokey Spin Milled 56°
Karsten B60 Hoofer Stand Bag 2008


Posted
I can't recommend a specific shaft for you but I can share some information I've gathered over the many day's I have spent reading G10 reviews. Every review, consistently, has said the G10 launch's the ball REALLY REALLY high.... so when picking your shaft/loft combo, keep that in mind! Best of luck :)

In the Grom bag:

Driver: G5 9* Aldila NV65
Irons: I-3 O-size
SW: cg14 56*Putter: Marilyn


Posted
I got fitted on a launch monitor and got a G10. I hit a stupidly low ball, but was very surprised by the results. I swing a driver at about 105 MPH with a smooth slow tempo. Knowing I hit a low ball, I was fitted and decided that a 12 degree head worked well. What surprised me was the shaft that I ended up with. I hit ever shaft, a V2, ProLaunch Blue, Aldila NV, Ping stock shafts,as well as a Diamana White Board. The shaft that worked best for me was a Grafaloy ProLaunch Red in a stiff flex. What is weird about this is that it's a low-launching shaft, for a penetrating ball flight. My old driver was a Ping G10 with a 10 degree head and a stock TFC shaft. I was straighter with the new shaft and was launching it 4 degrees higher and flying the ball 9 yards farther in the air. the biggest surprise for me that with the stiff shaft my swing speed actually increased up to 108 MPH and my ball speed was up to 162 MPH.

Take it for what it's worth, but it might be worth the wait to get fitted, rather than throwing your money away to buy a driver fast, like I did.

Just my 2 cents..

Note: This thread is 6489 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.