Jump to content
Check out the Spin Axis Podcast! ×
Note: This thread is 6426 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Recommended Posts

Posted

Thinking of modifying my putter shaft.

Please stop me now if you think this is gonna be a huge no no.

I'm talking about my Odyssey 2-ball. I love everything about this putter except the length. It's a stock putter in 36 length.

I grip down near the bottom of the grip.....generally with my right thumb over the Odyssey swirl mark at the bottom of the grip. This puts my hands at the skinniest part of the grip. As a result things can get a bit "wristy". To counter this I've grown in the habit of keeping my right index finger pointing down the shaft/grip.....

The other issue is that my set up yeilds a body position that has my elbows wide apart.

I have no complaints about my putting.....in fact it's the strongest aspect of my game since returning to golf last month. I'm a spot putter and generally two putt my way around the course.

I'm strongly considering cutting 1.5"-2" off my shaft and regripping with a oversized Winn paddle. This will put my hands on the "meat" of the grip while the thicker grip will get my right index wrapped around the grip vs down the shaft.

I'm not scared to make the change, but on the other hand I don't want to commit a crime, either.

The cost for this is only about $16.

Should I proceed or shelve the putter for a bit and try a shorter putter....I've seen some 3-ball Odysessys for sale for $99....I could try one in a shorter length. If it isn't to my liking then I can always trade / sell it to a buddy.

909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Posted
Unless you Odyssey was custom ordered then it is 35", because that is the stock length of all of their putters. Now I think you will be okay getting it cut down and such, but if you want the 3-ball I would say go for it.

Here's what I play:

Titleist 907 D2 10.5* UST ProForce V2 76-S | Titleist 906F4 18.5* Aldila VS Proto "By You" 80-S | Titleist 585H 21* Aldila VS Proto "By You" 80-S | Titleist ZB 4-PW TTDG S300 | Bob Vokey Spin Milled Oil Can 54.10 | Bob Vokey Spin Milled Oil Can 60.08 | Scotty Cameron Red X5 33" |


Posted
Go for it, you can always buy a shaft extender if you want to restore it to the original length. Just a warning though, the putter will feel significantly lighter if you cut it down. Longer putters are made with lighter heads while shorter putters have heavier heads. I cut down a Circa 62 from 35 to 33 and it was way too light to putt with. Ended up wasting my time.

Posted
Go for it. I had a 35" 2ball cut down to 33" and a Tiger Shark (very oversized) grip installed. Been playing it for about a year with no regrets at all.

-C

ITB:
905R Proforce V2
SS03 Fujikura Tour Platform
MD 21 Irod
MD 25 Fujikura Tour PlatformKZG Forged Blades 5-PW Rifle 5.5 Vokey SM 54/08, 60/04 Rifle Spinner Kombi 35"


Posted
If you think it will help go for it. I bought a 2-ball a couple months ago and quite honestly im really not liking it, it hasn't helped me at all.

Posted
A good master clubfitter will fit you. They have the tools/equipment to do it; and having your putter fit is just as (if not more important than) getting the rest of your bag fitted.

My regular playing partner just had the same putter (2-ball) bent. It's no big deal to get your specific flatstick fitted and will probably cost you $5.00.

I'm 2-degrees upright on my irons and 1-degree flat on my putter. Something to consider before hacking shaft lengths, etc.

HTH

Posted
Originally I was going to suggest to forgo it since you are already happy with your putting and I thought it would be more expensive. But after hearing it was only going to cost 16 dollars. I say go for it but I would consider what elchene said about the weight difference. It could mess with your feel and distance control. If it were me I would wait until the end of the season so you could spend your off season getting use to it.

Posted

I never knew the weighting would be different.....this is something odd.

I know the grip may be a tad heavier, but didn't realize their were differences in the head weights.

I think I'm gonna do it. I always grip well down on the putter so the end is useless. The larger grip would get my index finger off the side of the grip and wrapping around it where it should be.

I'll post up some pics when I get it done.

909D Comp 9.5* (house MATRIX OZIK XCON-6)
Burner Superfast 3 & 5 woods (house MATRIX OZIK XCON-4.8)
G15 Hybrid 23* (AWT shaft)
G5 5 iron-PW-46*, UW-50*, SW-54 & LW-58 (AWT shaft)
Studio Select Newport 2 Mid SlantGrips: PING cords & Golf Pride New Decade Multi-Coumpound Bag: C-130...

Posted
Unlike some putters, the head of your putter is not dictated by the length of the shaft. Some putters heads are lighter the longer the shaft, so cutting one of those would require you to put some weights in to counter not only the lose in shaft weight but also the change in the club's dynamics.

Since you choke down on the putter anyways the swing weight should be very much different. Once you cut the shaft and you can grip the putter closer to the end you should feel more connected to the putter.

Posted
My situation is a bit different but you need to think about one thing that Beung touched on.

When I had my Yes! putter extended 5 inches, I tried to putt a few an the had to get a counterweight put in the handle to balance it out. You will know as soon as you make that first putt if any thing might need to be done.

Note: This thread is 6426 days old. We appreciate that you found this thread instead of starting a new one, but if you plan to post here please make sure it's still relevant. If not, please start a new topic. Thank you!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Want to join this community?

    We'd love to have you!

    Sign Up
  • TST Partners

    PlayBetter
    Golfer's Journal
    ShotScope
    The Stack System
    FitForGolf
    FlightScope Mevo
    Direct: Mevo, Mevo+, and Pro Package.

    Coupon Codes (save 10-20%): "IACAS" for Mevo/Stack/FitForGolf, "IACASPLUS" for Mevo+/Pro Package, and "THESANDTRAP" for ShotScope. 15% off TourStriker (no code).
  • Posts

    • Day 1: 2025.12.26 Worked on LH position on grip, trying to keep fingers closer to perpendicular to the club. Feels awkward but change is meant to.
    • Please see this topic for updated information:
    • Please see this topic for updated information:
    • When you've been teaching golf as long as I have, you're going to find that you can teach some things better than you previously had, and you're probably going to find some things that you taught incorrectly. I don't see that as a bad thing — what would be worse is refusing to adapt and grow given new information. I've always said that my goal with my instruction isn't to be right, but it's to get things right. To that end, I'm about five years late in issuing a public proclamation on something… When I first got my GEARS system, I immediately looked at the golf swings of the dozens and dozens of Tour players for which I suddenly had full 3D data. I created a huge spreadsheet showing how their bodies moved, how the club moved, at various points in the swing. I mapped knee and elbow angles, hand speeds, shoulder turns and pelvis turns… etc. I re-considered what I thought I knew about the golf swing as performed by the best players. One of those things dated back to the earliest days: that you extend (I never taught "straighten" and would avoid using that word unless in the context of saying "don't fully straighten") the trail knee/leg in the backswing. I was mislead by 2D photos from less-than-ideal camera angles — the trail leg rotates a bit during the backswing, and so when observing trail knee flex should also use a camera that moves to stay perpendicular to the plane of the ankle/knee/hip joint. We have at least two topics here on this (here and here; both of which I'll be updating after publishing this) where @mvmac and I advise golfers to extend the trail knee. Learning that this was not right is one of the reasons I'm glad to have a 3D system, as most golfers generally preserve the trail knee flex throughout the backswing. Data Here's a video showing an iron and a driver of someone who has won the career slam: Here's what the graph of his right knee flex looks like. The solid lines I've positioned at the top of the backswing (GEARS aligns both swings at impact, the dashed line). Address is to the right, of course, and the graph shows knee flex from the two swings above. The data (17.56° and 23.20°) shows where this player is in both swings (orange being the yellow iron swing, pink the blue driver swing). You can see that this golfer extends his trail knee 2-3°… before bending it even more than that through the late backswing and early downswing. Months ago I created a quick Instagram video showing the trail knee flex in the backswing of several players (see the top for the larger number): Erik J. Barzeski (@iacas) • Instagram reel GEARS shares expert advice on golf swing technique, focusing on the critical backswing phase. Tour winners and major champions reveal the key to a precise and powerful swing, highlighting the importance of... Here are a few more graphs. Two LIV players and major champions: Two PGA Tour winners: Two women's #1 ranked players: Two more PGA Tour winners (one a major champ): Two former #1s, the left one being a woman, the right a man, with a driver: Two more PGA Tour players: You'll notice a trend: they almost all maintain roughly the same flex throughout their backswing and downswing. The Issues with Extending the Trail Knee You can play good golf extending (again, not "straightening") the trail knee. Some Tour players do. But, as with many things, if 95 out of 100 Tour players do it, you're most likely better off doing similarly to what they do. So, what are the issues with extending the trail knee in the backswing? To list a few: Pelvic Depth and Rotation Quality Suffers When the trail knee extends, the trail leg often acts like an axle on the backswing, with the pelvis rotating around the leg and the trail hip joint. This prevents the trail side from gaining depth, as is needed to keep the pelvis center from thrusting toward the ball. Most of the "early extension" (thrust) that I see occurs during the backswing. Encourages Early Extension (Thrust) Patterns When you've thrust and turned around the trail hip joint in the backswing, you often thrust a bit more in the downswing as the direction your pelvis is oriented is forward and "out" (to the right for a righty). Your trail leg can abduct to push you forward, but "forward" when your pelvis is turned like that is in the "thrust" direction. Additionally, the trail knee "breaking" again at the start of the downswing often jumps the trail hip out toward the ball a bit too much or too quickly. While the trail hip does move in that direction, if it's too fast or too much, it can prevent the lead side hip from getting "back" at the right rate, or at a rate commensurate with the trail hip to keep the pelvis center from thrusting. Disrupts the Pressure Shift/Transition When the trail leg extends too much, it often can't "push" forward normally. The forward push begins much earlier than forward motion begins — pushing forward begins as early as about P1.5 to P2 in the swings of most good golfers. It can push forward by abducting, again, but that's a weaker movement that shoves the pelvis forward (toward the target) and turns it more than it generally should (see the next point). Limits Internal Rotation of the Trail Hip Internal rotation of the trail hip is a sort of "limiter" on the backswing. I have seen many golfers on GEARS whose trail knee extends, whose pelvis shifts forward (toward the target), and who turn over 50°, 60°, and rarely but not never, over 70° in the backswing. If you turn 60° in the backswing, it's going to be almost impossible to get "open enough" in the downswing to arrive at a good impact position. Swaying/Lateral Motion Occasionally a golfer who extends the trail knee too much will shift back too far, but more often the issue is that the golfer will shift forward too early in the backswing (sometimes even immediately to begin the backswing), leaving them "stuck forward" to begin the downswing. They'll push forward, stop, and have to restart around P4, disrupting the smooth sequence often seen in the game's best players. Other Bits… Reduces ground reaction force potential, compromises spine inclination and posture, makes transition sequencing harder, increases stress on the trail knee and lower back… In short… It's not athletic. We don't do many athletic things with "straight" or very extended legs (unless it's the end of the action, like a jump or a big push off like a step in a running motion).
    • Day 135 12-25 Wide backswing to wide downswing drill. Recorder and used mirror. 
×
×
  • Create New...

Important Information

Welcome to TST! Signing up is free, and you'll see fewer ads and can talk with fellow golf enthusiasts! By using TST, you agree to our Terms of Use, our Privacy Policy, and our Guidelines.